Schreibeis Built

Schreibeis Built Professionally built and designed pedalboard & rack systems for guitar and bass. Nashville, TN

Also offering professional cable and loom services, pedalboard accessories, and more.

A rig we finished up a little while back. Lots of flexibility in the signal routing thanks to the TheGigRig and Axess El...
08/27/2026

A rig we finished up a little while back.
Lots of flexibility in the signal routing thanks to the TheGigRig and Axess Electronics.

This rig is set up to run with real amps as well as the ToneKing Amps Imperial preamp. It able to run Wet/Dry, Wet/Dry/Wet, Dual mono, or even run solely out of the Imperial Pre if the situation calls for it.
The outputs for the amp(s), Imperial preamp, and DI are all MIDI selectable. Allowing you to run any combination of outputs at once with the push of a button.
Weve also built in the ability to run acoustic intruments through this rig with a dedicated MIDI controlled Input and DI outputs.

There is a lot of power and flexibility in this relatively small package.

The Nerdy Stuff:
-Built on a Vertex Effects Tour Compact board

-Powered via Strymon Zuma / Ojia combo

-Strymon Conduit is handling TRS MIDI conversions.

-Axess Electronics is handling the Wet/Dry split, phase, providing ground lift if needed

- is handling Input selection.

-Schreibeis Built Custom routing interface to handle all the I/O for this rig. Including power input, signal inputs, audio/amp outputs, and MIDI input.

-All cable and connectors provided by Best-Tronics Pro Audio

Interested in getting BUILT?
Contact us at:
www.schreibeisbuilt.com

A rig we recently built. Tons of routing options, limitless tones. Theres a fair amount to unpack on this one so we'll r...
05/26/2026

A rig we recently built. Tons of routing options, limitless tones. Theres a fair amount to unpack on this one so we'll roll out more info a board at a time.

The Nerdy Stuff:

-Both boards are controlled via an Mastermind GT/16 on a third board (not shown) 

-When used in combination this rig allowes for wet/dry/wet routing. A mixture of direct signal via the Tone King Imperial preamp and live amplifiers. These could also be configured for other setup and signal routing types

-Effects routing handled via (2) RJM MEGX units. One on each board.

- compatt/x ISOPlus Splitter to assist in routing between the boards and multiple amps quietly and efficiently 

-Built on (2) aero series boards complete with Creation music risers. The risers have been modified for some extra clearance below. 

-Custom Schreibeis Built routing boxes allow these board to be used together or independently if needed. These route all the inputs, outputs, MIDI and linking cables to convient locations on the rear of the boards. As well as providing phantom power to The RJM Mastermind GT controller via a built in Phantom power injector. 

-All powered via PSUs

- cabling, squareplug, connectors

More specific details on each board soon!

Want to build your own dream rig??
Get a quote and Get Built:
Www.schreibeisbuilt.com

Under the hood of a recent build.Plenty of power thanks to multiple Power supplies.TRS MIDI control also with the assis...
05/15/2026

Under the hood of a recent build.

Plenty of power thanks to multiple
Power supplies.

TRS MIDI control also with the assist from Strymon

canvas on Acoustic DI duty

Custom routing interface to handle AC power, selectable dual guitar inputs, dual amp outputs, XLR MIDI in, Preamp DI output.

More info soon!

www.schreibeisbuilt.com

TRS to dual mono splitter/merger interface for our most recent build.Get Builtwww.schreibeisbuilt.com
05/04/2026

TRS to dual mono splitter/merger interface for our most recent build.

Get Built
www.schreibeisbuilt.com

Recent build we did for a local Client. The Nerdy Stuff:-Built on a x tour compact board and riser combo. -Powered via...
04/06/2026

Recent build we did for a local Client.

The Nerdy Stuff:
-Built on a x tour compact board and riser combo.

-Powered via Zuma power supply

-The brains of the operation, G3 Atom, handles looping and preset duties

- Custom routing interface to make I/O and powering the board a breeze. The interface not only routes the audio to an easy to reach place on the back of the board, it also allows the client to power everything from a single, locking AC cable that powers not the Zuma and memory man delay.

- and cable paired with and btpa connectors for solid, reliable connections

What to have your rig built?
Contact us!
www.schreibeisbuilt.com

04/05/2026

Custom Interface from a recent build.

-Locking powercon AC input
-Dual selectable Locking 1/4" inputs
-XLR Outputs for acoustic and Imperial Preamp
- Stereo Amp Outputs
-XLR MIDI input (not shown)

Modified Riser to allow access to the Canvas Stereo DI Outputs

More on this board in a future post.

Need a custom I/O box? Contact us!

www.schreibeisbuilt.com

Address

Nashville, TN
37201-37250

Website

Alerts

Be the first to know and let us send you an email when Schreibeis Built posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Schreibeis Built:

Shortcuts

Share