Thermal Engineering

Thermal Engineering This page is about the science and engineering practice of thermodynamics With it, we hope to educate, entertain and inform on this discipline!

This page is non-commercial and sponsored by Advanced Thermal Solutions, Inc. Heat generated by electronic devices and circuitry must be dissipated to improve reliability and prevent premature failure. Techniques for heat dissipation can include heatsinks and fans for air cooling, and other forms of computer cooling such as liquid cooling.

Monitors Ensure Liquid Cooling IntegrityThe effectiveness of looped liquid cooling is strongly impacted by the coolant’s...
02/14/2025

Monitors Ensure Liquid Cooling Integrity
The effectiveness of looped liquid cooling is strongly impacted by the coolant’s flow rate and volume, and leak-free operation. To ensure liquid cooling integrity, ATS provides inline digital flow meters and leak detectors. Flow meters monitor that coolants run at the specified rate. Leak detectors automatically shut off coolant flow and sound an alarm to protect equipment and safeguard performance. Questions? Email us: [email protected] https://ow.ly/c58Y50V060m

High Performing Slant Fin Heat SinksSlant fin heat sinks provide high levels of cooling performance due to their added s...
02/14/2025

High Performing Slant Fin Heat Sinks
Slant fin heat sinks provide high levels of cooling performance due to their added surface area. These low-profile heatsinks are made from lightweight aluminum. They are available to cool component sizes ranging from 10 x 10 mm to 60 x 60 mm. Slant fin heat sink heights range from 2-25 mm. They can be mounted to hot components with double-sided thermal tape, Z-clips, or using the ATS maxiGRIP system. Email us: [email protected] See more at: https://ow.ly/nnmh50V05PQ

High Level Heat Transfer with Heat ExchangersWith the industry's highest fin density, ATS heat exchangers maximize heat ...
02/14/2025

High Level Heat Transfer with Heat Exchangers
With the industry's highest fin density, ATS heat exchangers maximize heat transfer from liquid to air for high-level cooling in many industries. These heat exchangers have heat transfer capacities from 22W to 250W per ΔT=1°C. Stocked units are available in lengths from 5.8 to 21.9 inches, widths from 5.8 to 14.0 inches, and heights from 1.8 to 2.6 ins. Tube diameters are 0.375 in and 0.5 in. Email us: [email protected] https://ow.ly/ZRGj50V05HH

Precise Surface Temps Aid Scientific and Engineering StudiesMaintaining precise temperatures is essential for quality re...
02/13/2025

Precise Surface Temps Aid Scientific and Engineering Studies
Maintaining precise temperatures is essential for quality results in many science and technology applications. The CIP-1000 controllable isothermal plate provides a consistent surface temperature that is precisely adjustable from 10°C to 170°C. Temperature accuracy is +/- 0.1°C. The temperature of the CIP-1000 device’s 75mm diameter plate is raised or lowered manually or by automatic controller. Questions? Email us: [email protected] See: https://ow.ly/qEO050UZe3v

Rapid Prototyping of Thermal SolutionsATS provides state-of-the-art production at its Massachusetts, USA home base, and ...
02/13/2025

Rapid Prototyping of Thermal Solutions
ATS provides state-of-the-art production at its Massachusetts, USA home base, and in China. When the need is there, we provide engineers with rapidly produced cooling prototypes.
For this service just follow these steps
• Upload your mechanical drawing
• Receive a quote and place your order
• Receive your parts within 24-72 hours
Questions? Email us: [email protected]

https://ow.ly/VKtF50UZcXq

02/13/2025

Wind Tunnel Characterizes Jetson Modules and More
The PCIe wind tunnel from ATS thermally characterizes flat and plug-in PCIe cards to optimize their performance in edge AI applications, including embedded NVIDIA Jetson modules. The wind tunnel thermally characterizes full and half-height standard PCIe cards. Airflows up to 7 m/s (1,400 ft/min), higher with customization. Clear LEXAN walls allow flow visualization. Email: [email protected] https://ow.ly/QKEF50UZcIC

Probe Measures Vertical Air Temp and Velocity The MS 1000-IP-20 probe measures fluid velocity and temperature on three l...
02/12/2025

Probe Measures Vertical Air Temp and Velocity
The MS 1000-IP-20 probe measures fluid velocity and temperature on three levels in the same vertical plane. The three-sensor probe replaces multiple probes for determining an airflow’s profile and distribution. Data from a single sensor removes errors attributable to non-isothermal airflow when using several sensors. The MS 1000-IP-20 probe measures air temps from -10°C to 120°C and velocities from 0 to 50 m/s. Email us: [email protected] https://ow.ly/8C4O50UYqjb

Securely Mounted Push Pin Heat SinksConvenient, low-cost push pin heat sinks come in more than 100,000 combinations of s...
02/12/2025

Securely Mounted Push Pin Heat Sinks
Convenient, low-cost push pin heat sinks come in more than 100,000 combinations of sinks and pins. Heat sink designs include straight fin, cross-cut, and highest-performing, slant fin maxiFLOW versions. Push pins enable secure mounting to PCBs and come in plastic, brass, and stainless steel to match application needs. Email us: [email protected] See more: https://ow.ly/xtRn50UYqbM

02/12/2025

PCIe Wind Tunnel Allows Flow Visualization During Testing
The CLWT-067-PCIe wind tunnel is used to thermally test and characterize components, boards, and heat sinks on full and half-height PCIe cards. Its clear Lexan test section allows direct flow visualization, and has five ports for adding sensors, pitot tubes or thermocouples to measure air velocity, pressure, humidity, and temperature. The wind tunnel’s closed loop design provides airflows up to 7 m/s (1,400 ft/min). Email: [email protected] https://ow.ly/cnQL50UYpVc

Compact Module Brings Refrigeration Where NeededThe ATS-RC1010, fluorine-free refrigeration system, provides up to 700W ...
02/11/2025

Compact Module Brings Refrigeration Where Needed
The ATS-RC1010, fluorine-free refrigeration system, provides up to 700W of cooling over -16 to +30°C, with compressor speed control. This small form factor refrigeration module is easily implemented in defense, industrial, biomedical, communications and other electronics where proper thermal management is essential. The noise level is less than 40 dB. The RC1010 can provide with chilled liquid or air. Questions? Email us: [email protected] See: https://ow.ly/KUak50UXyYn

Validating Custom Cooling SolutionsFrom its thermal labs, ATS performs testing and analysis to validate every custom coo...
02/11/2025

Validating Custom Cooling Solutions
From its thermal labs, ATS performs testing and analysis to validate every custom cooling solution.
Each solution must be effective, practical, and manufacturable.
Engineers in the ATS Thermal Characterization labs use these validation tools:
• Instruments and sensors to measure
o air velocity
o air temperature
o air pressure measurements
• Wind tunnels to characterize components and boards in actual applications
Questions? Email us: [email protected]

See more: https://ow.ly/TanV50UXyJq

Compact Heat Exchangers Liquid-Cool Hot ComponentspicoHEX compact heat exchangers provide liquid cooling in small form f...
02/11/2025

Compact Heat Exchangers Liquid-Cool Hot Components
picoHEX compact heat exchangers provide liquid cooling in small form factor applications where standard exchangers will not fit. Their heat transfer performance ranges from 5W – 15W per ΔT = 1°C for cooling CPUs, GPUs, AI processors, and FPGAs. picoHEX heat exchangers are made from copper and steel, with high-density fins and integrated fans and blowers. Questions? Email us: [email protected] See: https://ow.ly/USkN50UXyxf

Address

90 Access Road
Norwood, MA
02026

Website

Alerts

Be the first to know and let us send you an email when Thermal Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Thermal Engineering:

Shortcuts

Share