Cutting Edge HVAC LLC

Call Directions Website Contact the business

Cutting Edge HVAC LLC Life is already stressful. Don’t let your hvac system stress you out more!! Call Cutting Edge!!

❄️ Cold weather is coming let’s keep the cold outside where it belongs! 🔥Whether your furnace needs some attention, your...
10/26/2026

❄️ Cold weather is coming let’s keep the cold outside where it belongs! 🔥

Whether your furnace needs some attention, your system is ready for an upgrade, or you need a mini-split for that hard-to-heat space, Cutting Edge HVAC LLC has you covered.

From service calls and system replacements to custom homes and remodels, we take pride in clean installs, quality work, and keeping Utah homes comfortable. 💪

📩 Message us to schedule your service or talk about your next project!

Cutting Edge HVAC LLC Quality isn’t expensive it’s priceless.
801-874-2127
Www.cuttingedgehvacllc.com
Cutting Edge HVAC LLC
[email protected]

TRUCK NUMBER 5 COMING IN HOT Another van joining the Cutting Edge HVAC fleet! 🙌🔥❄️ My old employer is upgrading their fl...
10/24/2026

TRUCK NUMBER 5 COMING IN HOT

Another van joining the Cutting Edge HVAC fleet! 🙌🔥❄️

My old employer is upgrading their fleet, and my old boss hooked us up with a really good deal on one of their box vans. I’m very thankful for him helping us out as we keep growing.

Owning a business makes you appreciate things like this even more. Having someone you used to work for support what you’re building means a lot, and I don’t take it for granted.

We’ll get some Cutting Edge decals on this thing, load it with tools, and put it back to work! 💪

Big thank you to my old boss for helping us take another step forward!

Knocking out another project at Grit Marketing! 💪❄️We’ve got two separate 18K mini-split systems roughed in at their war...
10/23/2026

Knocking out another project at Grit Marketing! 💪❄️

We’ve got two separate 18K mini-split systems roughed in at their warehouse one for the IT room to keep their equipment cool and another for the podcast room to keep everyone comfortable. 🎙️

Both indoor heads are mounted, with line sets, drains, and wiring run up to the roof. Once the electricians get power ready, we’ll bring in a crane, fly both outdoor units up, get them set, and fire these systems up!

We’ll also finish off the exposed line sets from the indoor units to the T-grid with line-hide for a clean, finished look. Another job coming together for the Cutting Edge crew! 🔥

Side note the linesets will be slashed in with the proper flashing that is to protect is from water in the mean time

The guys are KILLING IT on this 26,000-square-foot home! 💪🔥We’ve got 5 of the 7 systems wrapped up and are getting ready...
10/22/2026

The guys are KILLING IT on this 26,000-square-foot home! 💪🔥

We’ve got 5 of the 7 systems wrapped up and are getting ready to tackle the final two! Still a few little things to tie in here and there, but this beast is coming together.

A job this size takes teamwork, planning, and guys who take pride in their work. Proud of this crew and the hard work they’re putting in every day! 👊

🥩 WHO WANTS DINNER ON CUTTING EDGE HVAC?! 🥩Help us get this page to 600 followers by November 30th, and we’ll give one l...
10/20/2026

🥩 WHO WANTS DINNER ON CUTTING EDGE HVAC?! 🥩

Help us get this page to 600 followers by November 30th, and we’ll give one lucky follower a $100 Texas Roadhouse gift card! 🤠🔥

Once we hit 600, we’ll randomly draw a winner from everyone following our page new followers and the people who’ve been supporting us all along!

Make sure you’re following, and feel free to share with your friends. We appreciate everyone helping our small business grow! 🙌

No purchase necessary. Must reach 600 followers by November 30, 2026, for the drawing to take place. This giveaway is not sponsored, endorsed, or administered by Facebook or Texas Roadhouse

Meet Cutting Edge HVAC’s newest apprentice! 🤖🔧Shows up on time, doesn’t lose tools, and claims he knows everything… so b...
10/20/2026

Meet Cutting Edge HVAC’s newest apprentice! 🤖🔧

Shows up on time, doesn’t lose tools, and claims he knows everything… so basically a normal apprentice with a charging port. 😂
Sent him for the duct stretcher and he’s been buffering for 45 minutes.

Already asked for a raise. Told him we’ll upgrade his batteries after his 90 days. 🔋🤣

10/13/2026

We are back with another October hvac one liner!! Give us a call for all your hvac needs!!

801-874-2127
Www.cuttingedgehvacllc.com
Cutting Edge HVAC LLC

Another customer-supplied mini split wrapped up by Cutting Edge HVAC! 💪🔥❄️The customer brought the equipment, and we bro...
10/13/2026

Another customer-supplied mini split wrapped up by Cutting Edge HVAC! 💪🔥❄️
The customer brought the equipment, and we brought the crew to get it installed and ready to keep their space comfortable!

We appreciate everyone who trusts us with their projects and keeps our crew busy. Whether it’s a full custom home or a mini split install, we take pride in the work we put our name on. 🙌

Big remodel coming up in Sandy! 🔥🙌The Cutting Edge HVAC crew is getting ready to tackle another big project, and we’re e...
10/08/2026

Big remodel coming up in Sandy! 🔥🙌
The Cutting Edge HVAC crew is getting ready to tackle another big project, and we’re excited to get in there and get to work!

Remodels always bring their own challenges, and we’re ready to put our experience to work as this home takes shape.

We’re thankful for the continued work coming our way and the trust people put in our team. Stay tuned we’ll bring you along as this one gets rolling! 💪🔧

It’s Monday, and the Cutting Edge HVAC crew is already getting after it! 💪🔥We’ve got the crew plugging away at the 26,00...
10/06/2026

It’s Monday, and the Cutting Edge HVAC crew is already getting after it! 💪🔥
We’ve got the crew plugging away at the 26,000-square-foot home while our other guys are running around the valley putting out a few fires and keeping our customers taken care of!

We couldn’t do any of this without our team. We’re thankful for their hard work, the pride they take in every job, and all the continued work coming our way. To our customers and builders thank you for trusting us and keeping us busy! 🙌

Address

291west 2000north
Orem, UT
84057

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+18018742127

Alerts

Be the first to know and let us send you an email when Cutting Edge HVAC LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cutting Edge HVAC LLC:

Shortcuts

Share

Nearby engineering companies