BSP Welding and Repair LLC

06/03/2026

This spout from a Gehl chopper was getting thin and wore through from all the years of use. When new ones are no longer available only option is to fix what you have. I was able to cut out bad areas and make new pieces to weld in. Now it’s ready to chop some hay.

Since June is Dairy month a big thank you to all the Dairy farmers for your hard work and dedication. So we can all can enjoy milk and those delicious dairy products.

05/04/2026

Since we are in dock installation season I thought this would be a good share for those that have floe dock adjustable legs. I had a customer bring me a few legs that would no longer adjust. They are non serviceable so I cut them apart to see if I could repair them. I found 2 failures. They failed because of broken tack welds or because the plastic nut failed. That’s right there is a plastic nut on a 3/4 acme thread aluminum threaded rod that does all the adjusting. I was able to find a replacement nut to repair them. So keep that in mind when adjusting them. Don’t over do it the nuts will split or strip. See photos below of what I’ve found.
If you are in need of any dock or boat lift repairs BSP Welding and Repair is here to help you with those. Portable or in shop repair is available. Contact Brad @ 320-309-9401.

04/11/2026

Check out the custom pickup box rack I fabricated for a customer. It features a removable rear bar for loading and 10 different tie down loops for holding material in different positions. Thank you Bork Lumber and Steel for your business. If you’re in need of anything for building or building materials they are great people to work with.

04/06/2026

03/03/2026

With winter coming to an end and warmer weather on the way do you plans for using a trailer for work or fun? Do the lights work? Have you checked the brakes or wheel bearings? Does it need some welding or a new fender installed? If you have a utility, boat, skid loader, or enclosed trailer/fish house that need some repair or maintenance, BSP Welding and Repair can help you out with that. Good maintenance will help prevent bad days on the side of the road. Here are some photos of repairs I’ve done to trailers lately.

02/02/2026

I wanted to share some projects that came through the shop to finish up 2025. The year had a variety of projects and I’m looking foward to see what kind of projects are ahead for this year. Thank you to all my customers for your business. If you have a project in mind or need help with a repair contact Brad @ 320-309-9401.

12/25/2025

Wishing everyone a Merry Christmas from my family to yours.

11/01/2025

Hard to believe it’s November already! It has been a busy fall and lots of different projects have gone thru the shop. There has been trailers, buckets, and lawn mowers just to name a few. I’d like to share some photos of projects I’ve done. Thank you to all my customers and everyone that shares or recommends me to others. It means a lot to my family and I for all the support. Good luck to all the deer hunters. Have a safe and successful season.

10/15/2025

Its been awhile since ive shared any projects from the shop. Here is a millwork drying rack i fabricated. Nathan from Martinson Woodworks had a large order of millwork he needed to finish so he designed the rack and I brought it to life. If you need any cabinets or woodwork done I definitely recommend Nathan. He does an amazing job and is great to do business with.