IMCO Carbide Tool

IMCO Carbide Tool Tools made for the new age in metalworking. Our unique designs run smarter, smoother, and with incre Hard working tools, because they are made that way.

Every benefit of advanced technology goes into every tool, from unique geometries to high-performance coatings. Then they’re tested – In-house and in customers’ operations – to make sure you’ll get the most out of them.

06/05/2026

With High Efficiency Milling you want to use as much of the flute length as possible, if depth of cut is less than 1.5 times D, shoulder milling could be a better option.

06/03/2026

CNC Machining a 4 inch cutting blade for a flail mower out of 6AL-4V Titanium with an edge thickness of .100”.

06/02/2026

We decided to put our POW•R•FEED M935 to the test. We started at our maximum recommended MRR of 6.75 and increased by 20% until we hit a 4x increase, an MRR of 27! Not only did it make all the passes, the cutting edge still looked great!

05/29/2026

You've double checked the spindle and tool holder but are still chasing runout? If you aren’t running IMCO end mills, check that brand new cutter - not all end mills are created equal.

05/27/2026

Which of these two milling strategies do you prefer and why?

05/26/2026

End mills with specialized chip breaker geometry prevent long stringy chips from clogging up the tool's flutes and/or the machine's chip conveyor.

05/22/2026

The looping motion of trochoidal machining causes the tool to enter and exit the material gradually. Compared to traditional tool paths, this typically results in smoother tool pressure, lower deflection, and longer tool life.

05/21/2026

The low radial force and superior shearing action of helical interpolation results in high quality surface finishes, making it a great choice for creating or expanding larger holes.

05/19/2026

In addition to wiping down the tool holders, keeping your spindles free from runout includes giving them a wipe on a regular basis. A small amount of debris can cause a significant amount of runout.

05/15/2026

Hi-feed machining takes smaller cuts with each pass but results in high removal rate and consistent, predictable tool life.

Address

28170 Cedar Park Boulevard
Perrysburg, OH
43551

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+18007654626

Website

Alerts

Be the first to know and let us send you an email when IMCO Carbide Tool posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to IMCO Carbide Tool:

Shortcuts

Share