Prescott/Tri-City AZ CB/Ham Radio Operators Enthusiasts

12/01/2020

Im mulling over producing more videos. Im not sure what direction I should go with it and im still an armature at production. Let me know what you would like to see. I want to hear what my viewers want!

I do take GRC (GridCoin) donations to the following wallet address:

S5QNUviiA82Zj9kjCksud4kTkP7PdQYvzF

If I get enough donations I will be incentivized to put more energy into this fascinating world.

Thanks!

Stephen

09/24/2020

https://www.gofundme.com/f/save-capream-dairy039s-goat-heard?

Capream Dairy has fallen victum to a predatory loan. This predatory loan was sold to us as … Gary Carder needs your support for Save Capream Dairy's Goat Herd

08/27/2020

Silly video of me stripping wires for use in future projects. It is a time-lapse and there is no sound. Enjoy!

08/27/2020

I've been busy over the past week in my own personal life and have not gotten a chance to produce the content i had planned. In its place I will compile a fun video of me building things that did not turn out well or performed poorly. Stay tuned 😉

08/20/2020

Oy. I finally got fed up with all of these odd sized wire leads that I have been using on my breadboard. In an effort to make things a little more understandable and compact I purchased a smaller breadboard, some solid insulated rolls of 22awg wire, and also some blank pcb solder boards. This stuff should be arriving in the next couple of days and once it gets here I can start perfecting my own radio signal amplifier.

08/18/2020

I've finally been able to get good volume from my 16 ohm speaker. It took a couple days of experimenting with transistors I seem to have prevailed. I can't tell you how satisfying it is to build one of these things. Keep watching for more stuff like this!

08/12/2020

Ok so last night I decided to take apart the audio amp that I made with the goal to redesign it. I should be recieveing some much needed 10m ohm resistors today in the mail so I will be sure to post how that turns out. Hopefully I can get some more selectivity by perfecting my circuit.

08/11/2020

Ive been working on this little project in my spare time over the past month. I started by making the coil and gathering my needed components. Luckally this is something that you can build with parts easially sourced from the internet or even home made.
I recommend building one of these to anybody I can. It has taught me a lot about electronics and radio theory and I hope yall enjoy.

08/10/2020

I stayed up late last night getting this single transistor radio design to work. It finally does and here is my demo showing all things are possiable!

08/07/2020

Finally getting something together that remotely resembles a radio. I get my piezoelectric earphones today so I should be able to test this little prize out. If all goes well I will continue forward with building a sound amplifier for it and try to get it to all fit on this small board. If not ill just get a bigger board.. I want to be able to have interchangeable coils for tuning into any band that I want at any time. Fun stuff!