FAS Motorsports

06/05/2026

🚨🚨RAM TRX 130mm BILLET SUPERCHARGER SNOUT UPDATE🚨🚨

‼️BIG GAINS‼️

This RAM TRX was fitted with our 2.4L 130mm Billet Supercharger Snout and 130mm Throttle Body which replaced the Ported Factory Snout and 108mm throttle body.

The gains were incredible for ONLY CHANGING THE SNOUT AND THROTTLE BODY❗️ The exact same upper pulley was used❗️

Previously the TRX made 19psi with the factory ported snout and 108mm throttle body, and once switched over to the 130mm Billet Snout and 130mm Throttle body the TRX made 23.5psi 🤯 The much larger inlet and vastly improved air path through the snout yields incredible gains vs. the factory snout or 108mm snout❗️

🚨WEBSITE LINK🚨
https://fasmotorsports.com/shop/2-4l-130mm-billet-supercharger-snout/

Message with any questions or send us an email❗️

Fasmotorsports.com

[email protected]

06/05/2026

Recent truck build we helped Parker Mitchell out with! Awesome set up and what a first week of ownership lol

Using some of parts we offer/build at here at Fas Motorsports / fasmotorsports.com and installed in house.

https://youtu.be/s4Qh3S6h9z4?si=Owie3kSQtZNexhBU

Credit Card Shirts Here https://www.cleetusmcfarland.com/products/p...

06/05/2026

Credit Card Shirts Here https://www.cleetusmcfarland.com/products/p...

06/04/2026

❗️1000+HP RAM TRX❗️

This beautiful RAM TRX came in for our full treatment of Billet Supercharger parts including our,

-Billet 130mm Supercharger Snout ✅
-Billet 130mm Throttle Body ✅
-Billet Supercharger Lid ✅
-Billet 2.4L Bearing Plate w/ Billet Air Foil ✅
-Upgraded Pin Bushings ✅

Our 130mm Billet Snouts have been 3rd party tested and shown gains of 80-100+whp over factory snouts and 40-60+whp gain over 108mm aftermarket snouts.

https://fasmotorsports.com/shop/2-4l-130mm-billet-supercharger-snout/

Our Billet Snouts are manufactured to have the same bolt pattern as a Nick Williams or Whipple 130mm Throttle Body.

Send us a message or email with any questions❗️

Fasmotorsports.com

[email protected]

05/28/2026

‼️FAS "PREDATOR" Lower Pulley Kit‼️

The FAS Predator Pulley kit is the gold standard in “No Tune Hellcat Performance”

❗️EASY INSTALL, NO TUNE REQUIRED❗️

1.5-2psi gain with 40-70+whp gain over stock❗️

For use on ALL HELLCAT VEHICLES (Charger/Challenger Hellcats, Redeyes, TRX, Trackhawk, Durango etc..)

https://fasmotorsports.com/shop/fas-predator-lower-pulley-no-tune-required/

🇺🇸 MADE IN THE USA 🇺🇸

NO REMOVAL OF OEM HARMONIC BALANCER. Saves time, and keeps the dampening of your OEM balancer !

This is the perfect modification for any and all Hellcat vehicles!

From a stock vehicle to highly modified, these pulley kits work great! With its simple and easy install, you can gain 40-70+whp with NO TUNE on any Hellcat vehicle!

The FAS Predator Lower Pulley comes as a full kit with everything needed! New Crank Bolt, all fasteners, loctite, belts, install instructions etc.... Our kits come custom foam packaged for shipping safety!

A Slip on design for Simple/Easy Install✅

Full Kit with all parts needed with detailed directions✅

We use these in all of our power packages here at FAS with amazing results !

🔺No Tune Required

🔺40-70+whp Gain (WITH NO TUNE)

🔺For All Hellcat Vehicles

Message us for details or visit our website!

https://fasmotorsports.com/shop/fas-predator-lower-pulley-no-tune-required/

Fasmotorsports.com

05/24/2026

❗️FAS MOTORSPORTS HELLCAT IHI BILLET 130mm SUPERCHARGER SNOUT❗️

Our 130mm Supercharger Snouts are available for the 2.4L and 2.7L Hellcat IHI Superchargers❗️

With gains of 100+whp over your factory supercharger snout! Or gains of 60+whp over a 108mm aftermarket supercharger snout❗️

Our billet 130mm Supercharger Snouts are designed to maximize airflow with less supercharger RPM which allows the supercharger to stay cooler while making more boost! As an example, when tested by a 3rd party, our 130mm snout with a 2.75” pulley picked up 2+psi over a factory supercharger snout with a 2.60 pulley, and our 130mm snout picked up 1.5+psi over a competitors 108mm aftermarket snout with a 2.60” pulley! Less blower RPM but more boost!

❗️HUGE GAINS❗️

All of our billet snouts come fully assembled with race bearings as standard, hardened snout shafts, upgraded pin hubs etc…

Our 130mm Snouts are a direct replacement for a factory hellcat snout❗️

We have these in stock ready to ship❗️

https://fasmotorsports.com/shop/2-4l-130mm-billet-supercharger-snout/

Fasmotorsports.com

05/18/2026

05/18/2026

🔥 Whipple 2025 Raptor R 🔥

This beautiful 2025 Raptor R came in for some serious mods!

-3.8L Whipple Superchargers stage 2
-S&B Intake
-Vossen wheels
-UPR catch can
-High flow catted midpipe
-Eibach leveling springs

What a world of difference these modifications made for looks and power❗️💪🏼

Fasmotorsports.com

[email protected]

03/06/2026

🔥HELLCAT DAYTONA🔥

This BEAUTIFUL 2020 Charger Hellcat Daytona is owned by (on IG) and he brought it to us for some serious supercharger modifications, Interchiller and E85 tune❗️

This Hellcat received our full Race ported supercharger along with our Billet Supercharger Lid, Billet Supercharger Snout, Billet Bearing Plate, Billet airfoil, Billet 108mm Throttle Body and 5” High Flow Intake 🚀

🤯BILLET EVERYTHING🤯

ALL OF THESE PARTS ARE AVAILABLE ON OUR WEBSITE❗️

Fasmotorsports.com

We also added an IC Chiller which will keep the supercharger temps ice cold ❄️❄️❄️

We also have custom high flow intakes available for 130mm Set ups❗️

[email protected]

02/17/2026

FAS MOTORSPORTS HELLCAT 130mm Billet Supercharger Snout and Billet 130mm Throttle Body❗️

The new Billet 130mm Supercharger Snouts are offered for both the 2.4L and 2.7L Superchargers❗️

Along with the Billet Supercharger Snouts, we also are now offering Billet 130mm Throttle Bodies that are compatible with Whipples and other applications that currently use 130mm throttle bodies. We used the same bolt pattern so our customers could use the throttle bodies on other superchargers as well❗️

With our recent 3rd party testing (one of our previous post) by Allpar Garage and 1320Tunes of our 130mm snouts/throttle bodies, we saw HUGE gains over factory snouts and aftermarket 108mm snouts.

As shown in the previous 3rd party testing vs oem snout and aftermarket 108mm snout, the FAS 130mm snout made MORE POWER WITH SLOWER BLOWER SPEEDS (2.75” pulley on the 130mm snout vs 2.60” pulley on the oem snout and 108mm competitors snout) 🤯 Even with much larger upper pulley when tested the 130mm snout still picked up 17whp over the 108mm snout and 111whp over a oem snout.

With the same pulley it would have been roughly 60-80whp gain over a 108mm snout/TB.

Our 130mm Snouts are designed to be a direct replacement for your current Supecharger snout❗️

Our first batch has been finished and shipped out to customers who had orders in❗️ We have a few of each Snouts in stock and plenty of 130mm throttle bodies❗️

🔺2.4L 130mm Billet Supercharger Snout🔺

https://fas.fasmotorsports.com/product/hellcat-130mm-billet-supercharger-snout-2-4l-supercharger/

🔺2.7L 130mm Billet Supercharger Snout🔺

https://fas.fasmotorsports.com/product/hellcat-130mm-billet-supercharger-snout-2-7l-supercharger/

🔺130mm Billet Throttle Body🔺

https://fas.fasmotorsports.com/product/hellcat-130mm-billet-throttle-body/

GET YOURS TODAY❗️

Fasmotorsports.com