Cleveland Punch & Die Company

Call Directions Website Contact the business

Cleveland Punch & Die Company Industry leader in punches, dies, shear blades and other ironworker component parts since 1880. Quality and service have long been our top priorities.

Established in 1880, Cleveland Punch & Die Company manufactures steel punches, dies, shear blades and tool holders for customers across the Steel Fabricating Industry. We are an American punch and die manufacturer servicing customers in an ever changing world. Industries such as Steel Construction, Structural Fabrication and Metal Building have endured decades of change with us. We have never lost sight of our goal: to be the leading supplier of Punches, Dies and related tooling across all major industries. Technology has changed over the years, of course, and we have maintained an enviable position on the threshold of every advance. Our experience in the evolution of our craft is a tangible value not found anywhere else in the industry. We welcome the opportunity to show how we have become known as The World Leader in the Tooling Industry.

Geka ironworker pipe notch housing and tooling is now in stock! Notch 3/4” - 2” schedule 40 and 80 pipeCompatible for Ge...
09/17/2026

Geka ironworker pipe notch housing and tooling is now in stock!
Notch 3/4” - 2” schedule 40 and 80 pipe
Compatible for Geka Hydracrops 55, 80 and 110 models

05/08/2026

A little Friday R&D for our engineering team! This custom punch and die forms tabs in the material, turning it into a track with built in locking features!

03/12/2026

Piranha notcher tooling - it’s that simple!
Watch how quickly you can cope the end of pipe to fabricate two pipes together.
Machine:Piranha P50 Ironworker
Material: 1-1/2” sch 40 pipe
Tooling: Piranha housing, 1-1/2” sch 40 notcher set, and a F16 striker punch
Availability: in stock

02/19/2026

Squares are stocked and made in many sizes, but sometimes a square punch can be too large to fit in your punch nut.
First check the ID of the punch nut and then the diagonal of the square punch using calipers.
The diagonal needs to be smaller than the ID in order for the punch to correctly pass through.

02/12/2026

It’s almost Valentine’s Day…but your punch and die need some space. 💔
Punches and dies should NOT be the same size.
Material type and thickness determines how much space or “clearance” is required. The thinner and softer the material, the less clearance needed. The thicker and harder, the more clearance is needed.

Two different types of punch end shears with similar functionality: House top shear & chisel point with center House top...
02/09/2026

Two different types of punch end shears with similar functionality: House top shear & chisel point with center
House top shears are also known as chisel points and are used to help reduce tonnage and shock.
Chisel point with center is similar, but the center point helps the operator pin point exactly where the hole needs to be punched.
Ask our reps how punch ends could help your next project!

02/05/2026

20” Scotchman flat bar blades featuring an upper sabre blade.
Sabre blades are significant because the material is sheared gradually and the radius helps reduce tonnage and shock!

01/13/2026

The “key” to obtaining shelf rack holes is a keyhole shaped punch!

11/12/2025

Tip of the week: make sure the material you’re punching is completely under the st****er foot.
This is a classic example of what can happen when your material isn’t entirely under both sides of the st****er foot.
On the upstroke, the material is stuck to the punch. In more serious cases, the punch can break and put you in a dangerous situation!
Stay tuned for more punching and ironworker tips just like this!

If you have one of these machines in your shop, we make the tooling you need! Our punches, dies, shear blades, and acces...
11/04/2025

If you have one of these machines in your shop, we make the tooling you need!
Our punches, dies, shear blades, and accessories are made for all major ironworkers in the industry.
We support Piranha, Edwards, Geka, Scotchman, Amanda Marvel & many more!

Address

666 Pratt Street
Ravenna, OH
44266

Opening Hours

Monday 7am - 6pm
Tuesday 7am - 6pm
Wednesday 7am - 6pm
Thursday 7am - 6pm
Friday 7am - 5pm

Telephone

+13302964342

Website

,

Alerts

Be the first to know and let us send you an email when Cleveland Punch & Die Company posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cleveland Punch & Die Company:

Shortcuts

Share

Category