Rimco Inc.

Call Directions Website Contact the business

Rimco Inc. Rock Island's Premier Machine Fab and EDM shop. Make It in America!! Rimco Inc.

is your premier shop for first class Machine, Fab, and EDM work, Mig and Tig Welding of all Mold Steels, Aluminum, Magnesium, and Titanium, Certified Machinist and 20 yr Journeyman Tool and Die Maker with the US Dept of Labor.

Due to my extravagant boat buying lifestyle yesterday I was forced to work today!! Was a rainy ol gray day to get caught...
10/12/2026

Due to my extravagant boat buying lifestyle yesterday I was forced to work today!!

Was a rainy ol gray day to get caught up on some jobs

Got this Riser done for a holding tank,
Its 5ft tall, 24 inches in diameter, 24 bolt bottom fl**ge with a hinged top lid

Sprayed some gray epoxy primer on it and its ready to deliver tomorrow 💯🇺🇸

Mama taught me years ago when she made my chore list out that you better be able to do it all in this ol world we live i...
10/01/2026

Mama taught me years ago when she made my chore list out that you better be able to do it all in this ol world we live in

When Matt called needing 72 feet of pallet racking so they could organize their oil, antifreeze and a place to put new boat motors, was glad to help

Had to work around 2 doors, 2 HVAC units, a compressor, and make 1 1/2 inch thick spacers for the front due to 2 degrees slope in the concrete and anchors for the top of the racks to the wall

They are ready to start filling them up!!

Love getting to work here, found a heads up penny in the parking lot today and get to see the nicest selection of boats in Tennessee imo

Thanks for the help yesterday Porter!!
I think you went in the hole though after buying that MasterCraft!! 😂😂

Well a Center Hill log claimed another victim.. This one came in this week needing some attention Got her welded up and ...
08/29/2026

Well a Center Hill log claimed another victim..
This one came in this week needing some attention
Got her welded up and sanded back down today and ready to go rip some lips!!

These came in last week to be resurfaced, some good ol Dodge Journey Aluminum Heads off a 6 cylinderSet them up, they we...
08/22/2026

These came in last week to be resurfaced, some good ol Dodge Journey Aluminum Heads off a 6 cylinder

Set them up, they were both low in the middle, .010 of each head had them looking like new!!

This was a fun one, hot, but fun..Got the opportunity to do a small part in helping restore one of McMinnville’s 100 yr ...
08/15/2026

This was a fun one, hot, but fun..

Got the opportunity to do a small part in helping restore one of McMinnville’s 100 yr old buildings

Fabricated (4) Beams/Posts to help keep her standing for another 100 plus years

Shortest Beam was 13ft and longest was 23ft that tested the lifts and made for a high pucker factor positioning 900 lbs 8ft in the air

Thanks to Ben, Roger & Crew, Mike & Matthew, and Seth for all their help

My only hope is a old man walks in there 100 yrs from now and smacks one of the posts, looks up and says “that ain’t going nowhere”

Glad it quit raining, had this one come in last night with an emergency repair, it’s got to pump in smithville in the mo...
07/18/2026

Glad it quit raining, had this one come in last night with an emergency repair, it’s got to pump in smithville in the morning!!

The rear hitch tubes had started cracking, ground them out and welded back and added some gussets to stop that from happening again!!

Don’t get to do these kind of jobs around home, so when they come along I jump at the chance So glad I crossed paths wit...
06/30/2026

Don’t get to do these kind of jobs around home, so when they come along I jump at the chance

So glad I crossed paths with Kelly and Rick and got the opportunity to do these pieces

The first pic of the table I delivered today, the second and third is his fireplace, fourth is the stand for the prada dog piece that I’ve never gotten to see after the house remodel

All are done in Raw Steel, the older pieces I sprayed automotive clear, the table was powder coated in satin clear

Thanks to Jeff at Pure Powdercoat for making her pretty!!


🇺🇸

Needing a little more confidence and stability on that hillside mowing? Well don’t get Mad, call Brad!! Machined these W...
06/10/2026

Needing a little more confidence and stability on that hillside mowing?

Well don’t get Mad, call Brad!!

Machined these Wheel Spacers for this lil JD Mower, they are 6061 Aluminum, 6 inches in diameter, 3.625 wide with a staggered 5 on 4.750 bolt pattern and use the existing wheel studs to mount up

I didnt plan this but on the way out here it hit me what day it was Our freedom came with a price Was honored to get ask...
06/06/2026

I didnt plan this but on the way out here it hit me what day it was

Our freedom came with a price

Was honored to get asked to make this pledge of allegiance display stand

Its made out of Alum Tubing, tig welded, and powder coated to be around for many years

Thanks to Jeff at Pure Powdercoat in McMinnville Tn for laying down the architectural bronze and making it pretty

05/25/2026

🇺🇸

Address

871 Dove Road
Rock Island, TN
38581

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 12pm

Telephone

+19316868788

Website

Alerts

Be the first to know and let us send you an email when Rimco Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rimco Inc.:

Shortcuts

Share