Corrosion Fighters Inc.

Corrosion Fighters Inc. Corrosion Fighters Inc specializes in restoring a wide variety of systems via sandblasting & coating.

Corrosion Fighters Inc specializes in building asbestos-level containments in a vast amount of areas, both large and small, in order to refurbish and improve a wide variety of system that experience a wide range of wear and abuse. In most cases, this is achieved via sandblasting equipment and HEPA filtration followed by non-VOC epoxy coatings. All of Corrosion Fighters Inc projects follow SSPC & N

ACE standards and quality control documentation can be provided upon request. Corrosion Fighters Inc also offers surface inspection reports and project quality control support.

Check it out💥🥊 Swipe to see the before➡️This repair was done by our lead technician and is what we call a “bandaid” job ...
04/17/2025

Check it out💥🥊 Swipe to see the before➡️

This repair was done by our lead technician and is what we call a “bandaid” job 🤙🏼 🩹 The original coating system was installed by another contractor over 20 years ago - Corrosion Fighters came in with some TLC to bring it back to life! Shout out to Tony for this one 💪🏼

These newly installed chillers just got an upgrade! Swipe to see the before ➡️ and you will know what we mean we when we...
03/12/2025

These newly installed chillers just got an upgrade! Swipe to see the before ➡️ and you will know what we mean we when we say—it’s all about trusting the process.

Boston Properties called in Corrosion Fighters Inc. to give their chillers at the new Life Sciences building over in Kendall Square a serious facelift. Now, they are corrosion-free and built to last for years to come! 💥🥊

CFI spent many long nights restoring Trecan Snowmelters at Logan Airport this past Summer 2024. These melters have been ...
11/26/2024

CFI spent many long nights restoring Trecan Snowmelters at Logan Airport this past Summer 2024. These melters have been in service for +15 years without any lining system resulting in severe corrosion and pinhole leaks. Each Snowmelter was blasted, patched, and coated with Duromar SAR & HPL1110 for a +30mil lining system that will last many more years of melting to come!

Starting this warm 2024/25 winter season off with a small BAC cooling tower restoration in Worcester, Ma. After containi...
11/26/2024

Starting this warm 2024/25 winter season off with a small BAC cooling tower restoration in Worcester, Ma. After containing & insulating the cooling tower, the galvanized steel basin & supports in this system were sandblasted to a +3mil profile and coated with +60mils of Duromar HPL3710 for years of protection to come!

The 2022/23 chiller season is back in full swing! This 870ton Trane Chiller was only in service for 5 years before Corro...
12/20/2022

The 2022/23 chiller season is back in full swing! This 870ton Trane Chiller was only in service for 5 years before Corrosion Fighters was called in to install a thick-clad coating system to protect the unit for many of years to come.

Thanks to the specialty coating plugs that Corrosion Fighters uses, we’re able to set a consistent coating thickness that is carried out to the edge of the Tubesheet for maximum
protection.

11/10/2022

Carbon fiber is already one of the most sought after materials for performance products - especially in industries like professional sporting goods and competitive auto racing circuits. With the new availability of Carbon fiber composite blends in FDM 3D printing, users can access the material like....

🥊Check out this quick vacuum-blast repair on a Trane chiller lid 🥊The original coating system failed on this lid due to ...
09/28/2022

🥊Check out this quick vacuum-blast repair on a Trane chiller lid 🥊

The original coating system failed on this lid due to incorrect tolerances on the gasket edges. Some modifications, concealed sandblasting, rebuilding with Duromar SAR, and a topcoat of Duromar HPL2510 resulted in a refreshed lid with no concerns of pinching or cracking when being reinstalled.

Now that’s a confined space!These “dog huts” are custom built for each chiller Corrosion Fighters completes. Due to near...
04/21/2022

Now that’s a confined space!

These “dog huts” are custom built for each chiller Corrosion Fighters completes. Due to nearby piping/structures, some can be quite a tight squeeze!

💎 Now that’s one clean sandblast profile 💎Always check your data sheets for minimum surface profile! The Duromar product...
03/12/2022

💎 Now that’s one clean sandblast profile 💎

Always check your data sheets for minimum surface profile! The Duromar product Corrosion Fighters uses calls for a 3mil SSPC-SP5 white metal blast profile at the minimum ✅

Corrosion Fighters Inc takes pride in giving their customers quality work and even offers a Quality Control & Inspection...
01/28/2022

Corrosion Fighters Inc takes pride in giving their customers quality work and even offers a Quality Control & Inspection services with full reports!

Our DeFelsko PosiTector makes this process extremely quick & delivers excellent results, especially with its swappable probes. This tool is key for following data-sheets/specs as well!

Checkout this divider plate rebuild! Nearly 2kg of Duromar SAR ceramic putty was used to restore this divider plate and ...
01/28/2022

Checkout this divider plate rebuild!

Nearly 2kg of Duromar SAR ceramic putty was used to restore this divider plate and bring our customer’s chiller back to its original efficiency!

Address

58 School Street
Rockland, MA
02370

Telephone

(508) 789-7828

Website

Alerts

Be the first to know and let us send you an email when Corrosion Fighters Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Corrosion Fighters Inc.:

Shortcuts

Share

Category