Origin Design & Technology, LLC

09/03/2026

A coordinated model is only valuable if the information can make its way into the field and process.

helps bridge that gap for structural steel by taking the model beyond basic geometry and into fabrication-level detail. Connections, plates, bolts, welds, shop drawings, material information, and fabrication data can all become part of the same workflow.

For teams, this creates an opportunity to coordinate structural steel at a much deeper level.

Instead of only asking:

“Does the beam clash with the ?”

We can also start looking at:

• Do connection plates or gussets create conflicts?
• Are there enough clearances around steel connections?
• Can MEP routing work with the actual fabrication model?
• Are coordination changes being captured before steel is released for fabrication?
• Can the coordinated model continue downstream into shop drawings and fabrication?

This is where starts becoming more than visualization and . The model becomes part of the actual construction and fabrication process.

As we continue exploring different VDC technologies and workflows, SDS2 is another example of how connecting design, coordination, and fabrication can help identify problems earlier and reduce changes in the field.

08/31/2026

What can a flight tell you about your jobsite?

More than just providing photos, drone data can be used to create accurate and measurable information for project teams.

• maps provide a detailed, current view of the entire site
• reports help track material quantities and changes over time
• Distance, area, and elevation measurements support planning and verification
• Recurring flights create a visual record of site progress

With the right data, teams can monitor site conditions, verify quantities, improve , and make decisions without relying only on information collected from the ground.

08/27/2026

What if you could walk into an existing building and know exactly what you’re working with before construction even starts?

That’s where Scan-to-BIM comes in.

By capturing existing conditions with 3D scanning and converting that data into a detailed model, project teams can:

• Reduce surprises during
• Improve between trades
• Verify existing conditions before design or fabrication
• Plan renovations and retrofits with greater confidence
• Save time by catching issues before they become expensive problems

Whether it’s a renovation, tenant improvement, or complex project, better information leads to better decisions.

08/24/2026

are becoming pretty common on sites, but are we using them to their full potential?

Taking a few aerial photos is great, but there’s a lot more information we can get from a single flight.

We’ve been exploring different ways to use drones throughout a project, from site progress and documentation to mapping, , existing conditions, and coordination with our workflows.

What we’ve found is that the real value isn’t necessarily the drone itself. It’s what you can do with the information after the flight.

Being able to capture a site today, compare it to where it was a few weeks ago, or bring field conditions back into the digital environment can give the project team a completely different perspective.

07/04/2026

Today marks 250 years of American independence.

It's a good reminder that this country has always been built by people who are willing to solve problems, work hard, and keep pushing forward. Whether you're out in the field, in the office, or behind the scenes, every project we complete is another small piece of that ongoing story.

From all of us at Origin, we hope everyone has a safe and relaxing 4th of July. Enjoy the time with your family and friends, and take a moment to appreciate how far we've come as a country over the last 250 years.

Happy Independence Day!

06/12/2026

Let’s be honest…
This is the kind of room where “we’ll figure it out in the field” goes to die.
Tight access, existing equipment everywhere, zero room for error... and somehow the new piping still has to drop in like it belongs there.
This is a 3D laser scan tied directly into a SolidWorks model. What you’re seeing isn’t a best guess, it’s built off real conditions, down to the fraction.

Every fl**ge lines up.
Every elevation hits.
Every spool is actually buildable.

Because without a scan, this job looks more like:
• burning time on extra site visits
• arguing over dimensions
• cutting and reworking pipe on-site when it doesn’t fit

We skip all of that.
Scan it → model it in SolidWorks → fabricate it → install it.
No drama. No surprises.
Crews show up, bolt it in, and move on to the next one.
That’s the whole goal: make prefab actually work the way it’s supposed to.
If you’re still rolling the dice on tie-ins in spaces like this… there’s a better way.

05/25/2026

Great time at with amazing companies across the valley.

05/22/2026

05/19/2026

Great time at the golf event, meeting with all the companies across the valley.

03/27/2026

We had the honor of participating in Career Day and connecting with the next generation of and innovators. It was a great opportunity to share how construction is evolving through . We introduced students to tools like mapping, scanning, and advanced workflows that support design and planning. Seeing their curiosity and excitement was inspiring. The future of construction is driven by innovation, precision, and digital solutions. We are proud to help students explore meaningful careers in construction technology and show how they can be part of shaping the built environment.