SYTIS

SYTIS Remote, real-time AI-powered thermal monitoring systems to safeguard what matters most

PREDICT. PREVENT. PROTECT.

We’re excited to share that SYTIS will be featured in NETA - InterNational Electrical Testing Association’s Spring 2026 ...
02/19/2026

We’re excited to share that SYTIS will be featured in NETA - InterNational Electrical Testing Association’s Spring 2026 Electrical Power Safety News special supplement!

As wind fleets scale, electrical faults, arc flash risk and unplanned downtime pose growing operational and safety challenges. Originally published as a cover story in WindTech International, SYTIS’ Troy Goss explores how fixed bi-spectral infrared imaging delivers continuous thermal visibility inside turbine nacelles — enabling earlier fault detection, fewer hazardous tower climbs and a practical shift toward condition-based maintenance at scale.

Stay tuned for the full article, available soon for public access.

Contact us at [email protected] to explore smarter wind farm maintenance.

Presidents’ Day Savings end today: up-to 30% off SYTIS handheld thermal tools+ SYTIS POC200 Pocket Thermal Camera – Ultr...
02/18/2026

Presidents’ Day Savings end today: up-to 30% off SYTIS handheld thermal tools

+ SYTIS POC200 Pocket Thermal Camera – Ultra-compact thermal imager with 256 × 192 IR detector, 5 MP visible light camera and Wi-Fi connectivity for fast, on-the-go inspections
+ SYTIS L250 Pistol-Grip Thermal Camera – Rugged, ergonomic handheld with SharpIR enhanced imaging and extended battery life for precise fault detection across demanding job sites

Limited-time savings end today: email [email protected]!

NRECA PowerXchange & TechAdvantage 2026 begins on March 9th. Visit SYTIS at booth 1210 to see how remote, continuous the...
02/17/2026

NRECA PowerXchange & TechAdvantage 2026 begins on March 9th. Visit SYTIS at booth 1210 to see how remote, continuous thermal monitoring helps electric cooperatives move from periodic inspections to real-time insight, improving reliability, safety and O&M efficiency.

Contact Chuck at [email protected] to set up a time to meet, or [email protected] for general inquiries.

02/13/2026

DTECH 2026 highlighted the evolving conversation around grid modernization and resiliency, as utilities respond to rising demands across an increasingly complex energy landscape.

Throughout the event, SYTIS engaged with utility teams and industry partners on how monitoring and diagnostic technologies can support these efforts in scalable, future-ready ways. At booth 5809, we shared how SYTIS solutions deliver remote, real-time infrared insight to help utilities improve visibility, identify risk earlier and stay ahead of evolving system demands across transmission and distribution.

Thank you to everyone who stopped by to connect and exchange perspectives on reliability, resiliency and the future of T&D infrastructure. We value the conversations that help turn grid challenges into actionable solutions.

Let’s continue the conversation: [email protected].

Celebrate Presidents’ Day with up to 30% off on essential SYTIS handheld thermal tools!+ SYTIS POC200 Pocket Thermal Cam...
02/13/2026

Celebrate Presidents’ Day with up to 30% off on essential SYTIS handheld thermal tools!

+ SYTIS POC200 Pocket Thermal Camera – Ultra-compact thermal imager with 256 × 192 IR detector, 5 MP visible light camera and Wi-Fi connectivity for fast, on-the-go inspections
+ SYTIS L250 Pistol-Grip Thermal Camera – Rugged, ergonomic handheld with SharpIR enhanced imaging and extended battery life for precise fault detection across demanding job sites

Limited-time savings: email [email protected] before the offer ends!

Grid resilience isn’t a forecasting problem, it’s a visibility problem.As aging infrastructure, electrification and extr...
02/12/2026

Grid resilience isn’t a forecasting problem, it’s a visibility problem.

As aging infrastructure, electrification and extreme weather push the U.S. grid to its limits, many reliability threats aren’t sudden — they’re detectable early through infrared insight, long before they become outages.

SYTIS’ latest analysis outlines a practical roadmap for resilience, replacing intermittent inspections and abstract risk scores with continuous thermal intelligence and verifiable early warning that crews can trust and act on.

Explore the full article: https://sytis.com/articles/fortify-a-practical-roadmap-to-a-more-resilient-u-s-grid/

We’re proud to share that Darryl Mendivil, SYTIS CEO, is featured in Fire & Safety Journal Americas!In this “Last Word” ...
02/03/2026

We’re proud to share that Darryl Mendivil, SYTIS CEO, is featured in Fire & Safety Journal Americas!

In this “Last Word” interview, Darryl breaks down how SYTIS Fire Detection Systems use thermal wildfire cameras to transform early fire detection, even in challenging terrain and weather conditions. He highlights how the technology helps fire agencies and utilities to:
+ Detect anomalies 24/7, using radiometric thermal imaging
+ Reduce false alarms using InfraSpec™ analytics, trained to distinguish fire signatures from environmental noise
+ Monitor vast wildland and urban-interface areas
+ Respond faster with instant alerts and remote access

From mountain peaks to rapid-response vehicles, the piece highlights how these systems are already making an impact today — and how SYTIS is championing predictive maintenance as a core pillar of next-generation wildfire mitigation.

Read the full FSJA “Last Word” interview here: https://na2.hubs.ly/H03rwdN0

Interested in strengthening early wildfire detection in your region? Contact us at [email protected].

DTECH 2026 is live! Visit SYTIS at booth 5809.The GridSafe™ Skid System is engineered to deliver real-time oversight in ...
02/03/2026

DTECH 2026 is live! Visit SYTIS at booth 5809.

The GridSafe™ Skid System is engineered to deliver real-time oversight in high-risk grid environments. At DTECH, we’re showcasing how its remote monitoring and automated alerting capabilities align with utility initiatives in substation management and condition-based maintenance.

To schedule a meeting, contact Chuck at [email protected].

01/30/2026

One week out from POWERGEN International 2026, and we’re still energized by the connections made with the teams building, operating and maintaining reliable power.

At booth 3048, SYTIS connected with operators, engineers and service providers to share how the TC-90™ Bi-spectral Card Camera enables remote, real-time diagnostics across electrical O&M. We discussed how continuous thermal insight can help surface emerging issues earlier and support more informed decisions in the field.

A highlight of the week was featuring our partner Ryan Severe of Puget Sound Energy, who presented his award-winning case study on the TC-90™ system’s pioneering deployment across PSE’s wind turbines and its impact on safety and reliability. Thank you to everyone who joined his “Seeing the Unseen” sessions.

We appreciate the thoughtful conversations and the opportunity to exchange real-world perspectives on keeping power reliable.

Interested in continuing the conversation? Contact us at [email protected].

For more information on the TC-90™, click here: https://tc90.sytis.com/

A substation failure in San Francisco left roughly 130,000 residents without power — a disruptive event that reflects a ...
01/28/2026

A substation failure in San Francisco left roughly 130,000 residents without power — a disruptive event that reflects a familiar pattern seen across power grids worldwide.

Our latest infographic breaks down what happened and why these failures develop over time, making early thermal visibility essential. The full article provides a deeper look at the event and its broader implications: https://na2.hubs.ly/H02_b140

Starting February 3rd, SYTIS will be exhibiting at DTECH 2026 in booth 5809.We’ll be showcasing how our GridSafe™ Skid S...
01/27/2026

Starting February 3rd, SYTIS will be exhibiting at DTECH 2026 in booth 5809.

We’ll be showcasing how our GridSafe™ Skid System supports grid modernization and resilience initiatives, delivering safer, more flexible monitoring solutions for today’s transmission and distribution networks.

If you’re attending the industry’s leading T&D event, stop by booth 5809 to connect with the SYTIS team and learn how the GridSafe™ system helps utilities deploy advanced monitoring quickly and securely in the field.

To schedule time during DTECH, contact Chuck Swanson at [email protected]

POWERGEN International 2026 is officially underway! Visit SYTIS at booth 3048.+ Head over to 304C at 10:30 AM to hear ou...
01/20/2026

POWERGEN International 2026 is officially underway! Visit SYTIS at booth 3048.

+ Head over to 304C at 10:30 AM to hear our partner, Ryan Severe, present his award-winning TC-90™ whitepaper.

To schedule a meeting, contact Chuck at [email protected].

Read the case study here: https://na2.hubs.ly/H037CTd0

Address

3474 Empresa Drive #150
San Luis Obispo, CA
93401

Telephone

+18664512257

Website

Alerts

Be the first to know and let us send you an email when SYTIS posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to SYTIS:

Shortcuts

Share

Category