DB Weld&Fab LLC

DB Weld&Fab LLC Mobile welding service using a fully equipped welding truck, serving residential, commercial, industrial, and agricultural clients.

With the mission to provide fast, reliable, high-quality services at the customer’s location.

At DB Weld&Fab, we spend the majority of our time working on heavy equipment and industrial machinery.As the owner/ope...
05/22/2026

At DB Weld&Fab, we spend the majority of our time working on heavy equipment and industrial machinery.

As the owner/operator, I truly enjoy this line of work because of the sheer size, power, and impressive capabilities of the equipment we get to work on every day. Being able to see and be a part of how these machines operate up close is an incredible experience.

Many people never get the opportunity to see what goes on behind the scenes or understand how this equipment functions on a day-to-day basis. This post is meant to highlight just how fortunate and grateful we are at DB Weld&Fab to be involved in this industry.

If you or someone you know is looking for a reliable mobile welder for:

• Repairs
• Maintenance
• Fabrication

Please reach out to us at DB Weld&Fab. We’re here to help keep you on schedule and in the green when it matters most!!

DB Weld&Fab recently had the opportunity to fabricate six custom transportation tree pod stands for a new landscaping cu...
05/22/2026

DB Weld&Fab recently had the opportunity to fabricate six custom transportation tree pod stands for a new landscaping customer.

These stands were specifically designed to fit the customer’s spade dimensions and are built to safely hold root balls with:

✔️ Maximum top width of 44”
✔️ Maximum bottom width of 22”
✔️ Maximum depth of 32”

Each stand is engineered to maintain enough clearance for the spade to easily remove and re-transplant the tree without issue.

At DB Weld&Fab, the possibilities are endless. We can build tree pod stands in virtually any size — large or small — and customize them to your exact spade specifications or unique operational needs.

Whether you need custom landscaping equipment, specialty fabrication, or a one-of-a-kind solution, DB Weld&Fab is here to help. We take pride in turning your ideas into reality and your headaches into solutions.

📞 Don’t wait to contact DB Weld&Fab for your next custom fabrication project!

Start-to-finish box spreader project 🔥Gouged off the old flights, cleaned up the shaft of remaining weld as well as exce...
04/08/2026

Start-to-finish box spreader project 🔥

Gouged off the old flights, cleaned up the shaft of remaining weld as well as excess rust, then installed all new flights with a clean established starting point. The whole job was Wrapped up in about 5 hours!

With mobile flux-core welding and plasma gouging, jobs that usually take all day can be knocked out way faster ⏱️

With how expensive new equipment and parts are getting, it just makes sense to repair when you can. We’re here to help save you money and get you back up and running 💪

Shoot us a message if you need something fixed right but also in a timely manner!

DB Weld & Fab would like to wish everyone a very happy and blessed Easter! 🐣✝️Below are photos from a project that had u...
04/06/2026

DB Weld & Fab would like to wish everyone a very happy and blessed Easter! 🐣✝️

Below are photos from a project that had us (HOPPING) in and around a wash plant.

The first task involved rebuilding the washout tub at the bottom. Years of wear had left multiple holes, with four layers of patches that were letting more out than they were keeping in. After removing the old material, we installed new AR400 and Hardox plates to provide a leak-proof, longer-lasting solution that can better withstand the wear and tear of a wash plant.

Next, we addressed the existing screen rails, which had worn out after 30 years of operation. All three levels of screen deck rails were cut out and replaced with new material—setting the system up for the next 30 years of service.

Additional improvements included maintenance patches, updated wear plates, and other upgrades throughout the plant.

The project is now complete and ready to go just in time for what is expected to be a busy season for our customer!

We’d like to thank Birling Bovines LLC for keeping us busy throughout the winter months! We had the opportunity to build...
03/29/2026

We’d like to thank Birling Bovines LLC for keeping us busy throughout the winter months! We had the opportunity to build two new manure tankers, along with upgrading one of their existing tankers to a 20” fast dump kit.

With pumping season approaching quickly, we were proud to get these tankers completed and ready to go to work right on time.

Check out the photos below to see some of the tankers and a behind-the-scenes look at what went into them from start to finish!

We recently had a customer bring in a new trailer for his landscaping business, Voyage Solutions WI. Tanner wanted fork ...
03/29/2026

We recently had a customer bring in a new trailer for his landscaping business, Voyage Solutions WI. Tanner wanted fork pockets installed, a designated space on the tongue for binders and chains, and the spare tire mount relocated. This setup allows the fork pockets to be positioned on the ditch side—helping keep both him and his equipment safely out of traffic.

DB Weld & Fab would like to thank Voyage Solutions for their business! If you’re in need of landscaping services, Tanner is your guy.

With spring approaching fast and the last bits of snow melting away, now is the time to make sure your equipment is ready to go. Reach out to DB Weld & Fab to get squared away for the busy season—whether it’s landscaping, ag, or heavy equipment repairs. Let’s get you ready for the rush!

We recently finished a project for a new construction calf facility at a local dairy, and we’re excited to share the res...
03/20/2026

We recently finished a project for a new construction calf facility at a local dairy, and we’re excited to share the results!

These four custom feed tote stands are installed in each corner of the barn to make feeding more efficient and convenient.

Each stand is elevated to allow a cart to roll underneath and catch calf feed with ease. They’re built to hold up to 2,500 lbs of feed at a time and are designed for functionality and durability. Feed totes can be placed from the front using a skid steer, and the structure is reinforced in all the right areas to safely support maximum weight—while still allowing a center opening for smooth feed flow.

If you or someone you know is in need of custom fabrication—agricultural or otherwise—don’t hesitate to reach out to DB Weld&Fab. We’d be happy to help get your next project underway!

📩 Message us today to get started!

Address

Seymour, WI

Telephone

+19204507479

Website

Alerts

Be the first to know and let us send you an email when DB Weld&Fab LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DB Weld&Fab LLC:

Shortcuts

Share

Category