Atlantic Precision Products

07/05/2023

Sad news to share....

Share Memories and Support the Family.

05/05/2023

05/05/2023

Thanks so much to Robert from Star Automation for another great install. Making a better way through automation!!!

04/27/2023

Send a message to learn more

03/07/2022

*URGENTLY HIRING EFFECTIVE 4/27/23*

B1:
1st Shift: 7:00AM - 3:30PM
2nd Shift : 3:00PM -11:30 PM

B2: (Mon-Thur ~ 4/10 hour days)
Dayshift: 7:00am - 5:30pm

Essential Job Duties:
•Operate an injection molding machine(s)
•Ensure operator work station at press is properly set up
•Visually inspect one shot prior to adding product to finished goods box
•Package product using care to prevent contamination and/or damage
•Label packaging in accordance with packaging instructions
•Count, record and report production scrap as well as good parts produced on the “Operator Production Data” sheet throughout the shift and on Part board at the press
•Communicate all quality issues or concerns to Shift Supervisor and Quality Assurance personnel
•Inform Shift Supervisor of poor-quality yield (high rejects), low production rates, or part containment issues
•Assist or replace other team members as needed to ensure production schedule is maintained
•Perform other tasks per Shift Supervisor and/or management
•Clean production area and assist in general housekeeping during the shift and at shift exchange handoff
•Review stated quality requirements in the Blue Book Manual on a daily basis. Operator Instructions, Quality Alerts, Packaging Instructions, Quality Inspection Instructions must be read line by line to ensure thorough understanding of procedures as well as part defect history.

Required Skills:
•No experience required, entry level positions available. Training is done on location after hire.
•Ability to read, understand and perform written instructions and memo.
•Basic math skills
•Use of basic measuring equipment
•Basic computer knowledge preferred, but training is provided

Physical Requirements:
•Stand 8-10 hours per day,
•May be required to push, pull, or lift 30 lbs
•Requires good visual, detail-oriented skills, manual dexterity and ability differentiate between colors

Benefits we offer:
•Pay is based on experience, performance, positive attitude, adherence to company policy and attendance)
•Insurance Plans for (Medical, Dental, Vision, Life and Disability) 1st of month following 30 days
•401k Plan after 60 days of employment
•Paid Holidays after 30 days and Paid Time Off program
•Healthcare spending HSAs

•Job Type: Full-time
•Some weekends as needed
•Overtime is possible, but not guaranteed

Send a message to learn more

04/21/2021

https://www.youtube.com/watch?v=KsjSf6z4Waw

RGGI - Resgreen Group 4/20/21

04/20/2021

Atlantic Precision Products is a leading manufacturer for the automotive industry. A growing and vital company, Atlantic Precision Products provides a great opportunity for hard-working and skilled individuals. We are looking for dedicated and passionate Machine Operator to produce a product of utmost quality. As an employee you will be responsible for operating an injection molding machine(s) to a specific cycle time and maintaining quality of parts to meet the customers’ requirements. You would also be responsible for scrap, machine efficiencies, safety, product packaging and correct product labeling. The Machine Operator will also be responsible for maintaining excellent customer service to internal and external customers always. We are seeking candidates who are extremely motivated and are excited about the opportunity to support all operational processes and procedures. If you like growth, the opportunity for development and working with happy, enthusiastic individuals, you'll enjoy a career with us!
*2nd Shift : 3:00PM -11:30 PM
* 3rd Shift: 11:00PM - 7:30AM
Essential Job Duties:
• Review stated quality requirements in the Blue Book Manual on a daily basis. Operator Instructions, Quality Alerts, Packaging Instructions, Quality Inspection Instructions must be read line by line to ensure thorough understanding of procedures as well as part defect history.
• Operate an injection molding machine(s)
• Ensure operator work station at press is properly set up
• Verify that the scale is properly set for the part produced detailed in the packing Conduct visual inspection to finished product and has the ability to detect defective parts
• Visually inspect one shot prior to adding product to finished goods box
• Package product using care to prevent contamination and/or damage
• Label packaging in accordance with packaging instructions
• Count, record and report production scrap as well as good parts produced on the “Operator Production Data” sheet throughout the shift and on Part board at the press
• Maintain press collection bins throughout shift to ensure acceptable inspection levels
• Maintain consistent machine cycle to ensure quality and productivity on operator jobs
• Communicate all quality issues or concerns to Shift Supervisor and Quality Assurance personnel
• Inform Shift Supervisor of poor-quality yield (high rejects), low production rates, or part containment issues
• Clean production area and assist in general housekeeping during the shift and at shift exchange handoff
• Ensure the floor and work areas are clean and left acceptable for next shift
• Follow company safety policies and special equipment safety practices as needed
• Assist or replace other team members as needed to ensure production schedule is maintained
• Perform other tasks per Shift Supervisor and/or management
Required Skills:
• No experience required, entry level positions available. Training is done on location after hire.
• Adherence to all MIOSHA safety requirements
• Ability to read, understand and perform written instructions and memo.
• Basic math skills
• Use of basic measuring equipment
• Good communication skills with ability to effectively communicate with colleagues and direct manager
• Must have proficient level of critical thinking skills.
• Must be able to do simple reporting
• The ability to work effectively as a member of a team
• Basic computer knowledge preferred, but training is provided
Physical Requirements:
• Stand 8 hours per day,
• Maybe required to push, pull, or lift 30 lbs
• Requires good visual, detail-oriented skills, manual dexterity and ability differentiate between colors
• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Benefits we offer:
• Pay is based on experience
• performance, positive attitude, adherence to company policy and attendance)
• Job Type: Full-time
• Some weekends as needed
• Overtime is possible, but not guarantee
• Insurance Plans for (Medical, Dental, Vision, Life and Disability) 90days
• 401k Plan after 60 days of employment
• Paid Holiday leave days and Paid time off program
• Healthcare spending HSAs
Job Type: Full-time

01/27/2021

Atlantic Precision Products is a leading manufacturer for the automotive industry. A growing and vital company, Atlantic Precision Products provides a great opportunity for hard-working and skilled individuals. We are looking for dedicated and passionate Material Handler/Fork Lift Operator for 2nd shift. The successful candidate will be responsible for keeping all production equipment with materials. You will be responsible for retrieving material within the plant to support manufacturing. You will be responsible mixing material and colorants and ensure the hoppers are properly filled. Also, assure FIFO and material identification are maintained. Organizational skills, Forklift experience and excellent attendance record is critical. The Material Handler will also be responsible for maintaining excellent customer service to internal and external customers always. We are seeking candidates who are extremely motivated and are excited about the opportunity to support all operational processes and procedures. If you like growth, the opportunity for development and working with happy, enthusiastic individuals, you'll enjoy a career with us!
2nd Shift: 3:00 PM – 11:30 PM
Essential Duties and Responsibilities:
Loads, unloads, and moves materials within the plant to support manufacturing
Communicates and coordinates manufacturing requirements with other shifts.
Communicates with Shift Supervisor pending mold and color changes during their shift.
Provide assistance to other Manufacturing Floor Associates as required.
Record start time and finish run time on Work Orders.
Maintain material levels in supply hoppers, shot hoppers, and dye loaders in accordance with manufacturing requirements.
Complete color and resin changes as required.
Empty grinder drawers on a regular basis, and clean grinders as required.Maintain regrind ratio standards. When dumping regrind into material ga***rd or container, mix materials to ensure proper mix of virgin vs. regrind.
Check the amount of material in the hoppers and ensure that they are filling properly
Check the amount of material in the ga***rds and add more material when necessary
Operates material mixers to combine materials and colorant, according to formula
Pre-dry material as needed & schedules material drying times and operates material dryers
Ensure that the dryer is on and if it is not, contact a Supervisor
Ensure that the vacuum system is effectively loading the material into the hoppers
At job changes, ensure that all grinding from previous job is done, clean grinder, hopper and dryer filters, set-up auxiliary equipment and blow off material from press.
Maintain housekeeping standards in your area in accordance with housekeeping guidelines.
Assist the Shift Supervisor, Quality Inspectors, Operators and Die Setters when necessary.
Education/Qualification:
High School or equivalent
Minimum 3 year previous experience in manufacturing and plastic preferred
Minimum 3 year experience driving hilo
Basic math skills: add, subtract and divide and all unites of measure using whole numbers and decimals
Ability to read and interpret a variety of instructions, documents and correspondence via multiple mode of communication (oral, written, etc)
Excellent attendance record is critical
Physical Requirements:

The physical demands describe here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, employee is occasionally required to stand; walk; sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; kneel; crouch or crawl; talk or hear; taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/ or move up to 100 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus.

01/04/2021

Atlantic Precision Products is a leading manufacturer for the automotive industry. A growing and vital company, Atlantic Precision Products provides a great opportunity for hard-working and skilled individuals. leading manufacturer for the automotive industry is looking for dedicated and passionate 2nd Shift Supervisor for Plastic Injection Molding. As a Plastic Injection Molding Supervisor, you will be responsible for exercising leadership, managing production responsibilities in accordance with customer requirements, provide directions to production employees while meeting safety requirements and adhering to all quality procedures (IATF). The Supervisor is also be responsible for maintaining excellent customer service to internal and external customers always. We are seeking a candidate who is extremely motivated and is excited about the opportunity to support all operational processes and procedures.

2nd Shift 3:00 PM – 11:30 PM
Essential Duties and Responsibilities:
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Communicates with Manufacturing manager for processing issues and concerns
Convey all information required to oncoming supervisor to assure he/she has all the information necessary to run a smooth production shift
Participated and contributed to continuous improvement and problem-solving activities
Verifies and perform process verification sheets
Responds to all process deviation sheets
Document any and all process changes per internal procedures
Directly responsible to monitor and maintain process in accordance with master set up sheet in the Job book
Follow all departmental operational procedures relating to the set-up, operation, and shut down of jobs
Trouble shoots process issues and receives approval to change the process if necessary
Responsible for keeping any equipment in good working order – this involves regular inspection, cleaning, servicing and maintenance
Document any noted clear or malfunction of equipment to ensure proper repair to equipment is completed on timely manner
Set tools if needed per schedule
Responsible for all documentation pertaining to the overall operation of their shift.
Maintain cleanliness and general appearance or the production floor
Trouble shooting of injection molding machines and auxiliary equipment
Reports and/ or repairs tooling issues if capable to manufacturing manager
Instruct all employees as to overall functions of equipment being used and be confident that all involving personnel have necessary knowledge to operate all machinery in a safe productive manner.
Ability to use a computer
Ability to communicate effectively
Maintains employee relations
Responsible for maintaining daily payroll accuracy for shift employees
Responsible for maintaining accurate employee files and the ability to complete Performance reviews
Other duties as assigned by your manufacturing manager
Experience, Education:
• High school diploma or general education degree (GED); or one to three years related experience and/ or training; or equivalent combination of education and experience.
• Prior Supervisor experience in Plastic Injection Molding REQUIRED!
• Ability to read and comprehend simple instructions and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to other employees of the organization.
• Ability to add, subtract, multiply, and divide using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent.
• Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Ability to appreciate proper safety techniques
Desired Experience
• RJG Training formally certified or demonstrated abilities in use of e-Dart system.**
• Certified Master Molder training received.
Physical Demands
• The physical demands describe here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **
• While performing the duties of this job, employee is occasionally required to stand; walk; sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; kneel; crouch or crawl; talk or hear; taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/ or move up to 100 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus.