Thin Film Materials

Call Directions Website Contact the business

Thin Film Materials Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Thin Film Materials, Chemical company, 32 N Gould Street, Sheridan, WY.

Thin Film Materials (TFM) is a global supplier specializing in various vacuum equipment and thin-film products, including sputtering targets and evaporation materials.

Working on a new multicomponent oxide thin film? The formula is only the beginning.Changing the cation ratio can change ...
10/15/2026

Working on a new multicomponent oxide thin film? The formula is only the beginning.
Changing the cation ratio can change the research question—and the requirements for target fabrication and verification.
Our latest technical guide explores three nominal Lu–Ni–Co–Fe–Mn–Cr–O compositions, from Mn-rich to Fe-rich, showing how composition becomes part of the target specification.
Shown here: individually vacuum-packed oxide sputtering targets from TFM.
For your next custom multicomponent oxide target, key specifications include:
• Full formula and critical per-element tolerances
• Purity, density and phase requirements
• Diameter, thickness and bonding needs
• Required composition and phase verification
Target chemistry sets the starting point. Final film composition still needs independent verification.
Have a composition in mind?
Message TFM with your formula or elemental ratios, target diameter Ă— thickness and quantity to start a technical review. We can then discuss bonding and characterization requirements.
đź“© [email protected]

When a customer asks for EuS, they usually have a very specific thin-film system in mind.Europium sulfide is used in spe...
10/09/2026

When a customer asks for EuS, they usually have a very specific thin-film system in mind.

Europium sulfide is used in specialized magnetic and functional thin-film research, including magnetic interfaces and topological-material heterostructures.

For a target like this, having the right material is only the starting point.

Composition, purity, density, surface condition, dimensions, and bonding requirements all need to match the actual deposition setup.

TFM supports custom EuS and other rare-earth compound sputtering targets for specialized research, with custom dimensions, bonded configurations, and CoA or inspection documentation as required.

Working with a specialized functional material?

Send us the material, purity, target size, bonding requirement, quantity, and application details. We can help review the target configuration for your deposition setup.

A YIG sputtering target is usually not a standard ceramic disc.When customers ask for YIG, they are often working on a s...
09/20/2026

A YIG sputtering target is usually not a standard ceramic disc.

When customers ask for YIG, they are often working on a specific thin-film application — magnetic films, magneto-optic studies, microwave materials, or advanced functional film research.

That means the target needs more than the right diameter.

Composition, density, surface condition, thickness, machining quality, and bonding requirements all need to match the deposition setup.

TFM supplies custom YIG and other functional ceramic sputtering targets based on material requirements, size, surface finish, bonding needs, and documentation requirements.

Need a ceramic target for a specific thin-film process?

Send us your material, size, purity, bonding requirement, and application details for review.

A custom target has to fit the system — not just match the material name.When a customer asks for a vanadium sputtering ...
09/15/2026

A custom target has to fit the system — not just match the material name.

When a customer asks for a vanadium sputtering target, the material is only the starting point.

The real questions are practical:

Will it fit the cathode?
Is the copper backing plate right?
Does the bonding structure match the system?
Will the total thickness work for installation?

That is where TFM adds value.

This vanadium target was supplied as a bonded assembly with a copper backing plate, made to the required size and configuration.

Before production, we review drawings, old target photos, bonding details, backing plate design, and assembly limits — so the target matches the actual deposition setup, not just a catalog size.

**Need a target built around your system requirements?**

Send us your material, size, bonding details, backing plate specifications, or old target photo for review.

A polished substrate is only useful if the surface stays protected before deposition.This batch of MgO wafers was double...
09/03/2026

A polished substrate is only useful if the surface stays protected before deposition.

This batch of MgO wafers was double-side polished and individually packed to help protect the surface during storage and shipment.

For thin-film research, substrate quality is not only about the material. Surface finish, orientation, thickness, and packaging all matter before the process even starts.

TFM supplies MgO wafers and other functional substrates for oxide films, epitaxial studies, and custom thin-film research.

Working on oxide films, epitaxial growth, or thin-film deposition?

Share your required size, orientation, thickness, polishing type, and quantity — TFM can help check suitable MgO substrate options for your project.

New arrival PrBCO target. PrBa2CuO7 sputtering target Thin Film Materials
08/29/2026

New arrival PrBCO target. PrBa2CuO7 sputtering target Thin Film Materials

Titanium Nitride (TiN) Sputtering Target — Bonded AssemblyA sputtering target is not just about the material itself.This...
08/27/2026

Titanium Nitride (TiN) Sputtering Target — Bonded Assembly

A sputtering target is not just about the material itself.

This TiN target has a clean gold-colored surface, well-finished edges, and a clear target-to-copper backing plate structure. For bonded targets, details like surface condition, edge quality, dimensions, and bonding accuracy can all affect installation and sputtering performance.

TFM supplies custom TiN sputtering targets and bonded assemblies with controlled dimensions, copper backing plates, clean finishing, and inspection documentation.

Have a similar target requirement? Send us the material, size, backing plate details, tolerance needs, or an old target photo for technical review.

Precision Surface Finish Matters — Tungsten Sputtering TargetA sputtering target is not only defined by its material pur...
08/21/2026

Precision Surface Finish Matters — Tungsten Sputtering Target

A sputtering target is not only defined by its material purity.

Surface condition, dimensional accuracy, flatness, and bonding design all play an important role in achieving stable thin-film deposition.

This tungsten sputtering target demonstrates TFM’s focus on controlled machining, consistent surface quality, and reliable target configurations for advanced deposition processes.

From standard sizes to custom designs, TFM supports tungsten targets with different purities, dimensions, and bonded or unbonded assemblies for research and industrial applications.

Need a tungsten target for your process? Send your specifications or drawing for technical review.

Vanadium (V) Sputtering Target – Bonded Assembly ExampleThis Vanadium target is a practical example of TFM’s bonded targ...
08/13/2026

Vanadium (V) Sputtering Target – Bonded Assembly Example

This Vanadium target is a practical example of TFM’s bonded target assembly capability.

Supplied with a copper backing plate, it is designed for thin-film research and coating applications. For sputtering targets, choosing the right material is only the first step. Size, bonding design, backing plate, packaging, and inspection reports can all affect the final deposition performance.

TFM offers custom sputtering targets in various materials, purities, sizes, and bonded or unbonded configurations.

Need a custom target?
Send us your material, size, backing plate specifications, or a photo of your old target for technical review.

A ceramic sputtering target may be only one part of the complete target assembly.Because oxide and ceramic materials are...
07/29/2026

A ceramic sputtering target may be only one part of the complete target assembly.

Because oxide and ceramic materials are often brittle and have limited thermal-shock resistance, bonding the target to a copper backing plate can provide better mechanical support, more stable installation, and improved heat transfer during sputtering.

TFM supplies custom bonded target assemblies with indium or elastomer bonding, copper backing plates, custom dimensions, and inspection documentation.

Send us your material, dimensions, drawing, backing plate details, or a photo of the used target for technical review.

Learn more:
https://thinfilmmaterials.com/products/bonding-service/

Address

32 N Gould Street
Sheridan, WY
82801

Alerts

Be the first to know and let us send you an email when Thin Film Materials posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Thin Film Materials:

Shortcuts

Share