1312 Metalworks LLC

Call Directions Contact the business

1312 Metalworks LLC Detail-oriented mobile welder ready to complete that project you've been awaiting. Feel free to call

Got another bracket replaced along with adressing a broken weld on a pivot joint.
10/22/2026

Got another bracket replaced along with adressing a broken weld on a pivot joint.

Tonight's quick fix. Bracket eye stretched over time, got it swapped out and ready for service.
10/21/2026

Tonight's quick fix. Bracket eye stretched over time, got it swapped out and ready for service.

First, teamed up with TG’s Welding Services to set and weld trusses, install purlins, and frame out openings for roll-up...
10/19/2026

First, teamed up with TG’s Welding Services to set and weld trusses, install purlins, and frame out openings for roll-up doors on a steel building. Learned some things and gained a bit of experience.

Next up was a stainless steel repair on a fire truck at a fire station in Krum, TX. Ground out the crack and fought to get it sealed up with water making things a little difficult. Made the repair and the trucks back in service.

From structural steel to stainless repairs, we’re ready to tackle the job and keep things moving.

13|12 Metalworks LLC Mobile Welding | Custom Fabrication | Repairs.

A little bit of progress on a couple of projects around the shop this week!First up, making headway on the 60” x 120” fa...
10/11/2026

A little bit of progress on a couple of projects around the shop this week!

First up, making headway on the 60” x 120” fab table, drilling holes for the new fixture table setup. Currently sitting at 460 holes drilled. It’s a work in progress that I chip away at when time allows. Couple existing holes prior to drilling need to be filled and drilled.

Also got another hydraulic tank in the shop with the same recurring issues — broken baffles and worn spots creating holes. Got it opened up, cleaned out, repaired, and put back into service with a quick turnaround to get the customer back up and running.
From shop improvements to equipment repairs, we keep making progress and getting the job done!

Putting the Fireball Tool hole drill template to work on my 60" × 120" × 1" fab table! Roughly 1800 holes 😬.Paired it up...
09/27/2026

Putting the Fireball Tool hole drill template to work on my 60" × 120" × 1" fab table! Roughly 1800 holes 😬.

Paired it up with a new Hougen mag drill for a true jig-table setup. This is going to make positioning, fixturing, and repeatable fabrication jobs a whole lot easier.

Just finished fixing up another batch of tanks with the usual cracks and broken baffles, but all three are back in servi...
09/26/2026

Just finished fixing up another batch of tanks with the usual cracks and broken baffles, but all three are back in service.

Started with a round-bottom end dump trailer with a damaged gate bracket. The previous repair was cut out completely, th...
09/11/2026

Started with a round-bottom end dump trailer with a damaged gate bracket. The previous repair was cut out completely, the area was properly beveled, full-penetration welds were made, and reinforcement plating was added for a stronger, longer-lasting repair.

Next up was an aluminum trailer with fender damage and crack repairs. Got everything repaired and wrapped up the night with some quality aluminum work.

Finished the night’s work in some nice, cool weather. Can’t complain about that! 🤙

13|12 Metalworks LLC
Mobile • Custom Fabrication • Repairs
📞 903-227-9276

Another set of hydraulic tanks back in service! These tanks were cut open to access and repair the internal baffles, the...
09/04/2026

Another set of hydraulic tanks back in service!

These tanks were cut open to access and repair the internal baffles, then sealed back up and welded. Also took care of the cracks and finished everything up to get them ready to go back onto designated semis.

13|12 Metalworks LLC
Mobile Welding • Custom Fabrication • Equipment Repair
Keeping your equipment working.

Projects over the past couple of weeks. Replaced a damaged fender after a loader hit it, then repaired the baffle inside...
08/29/2026

Projects over the past couple of weeks. Replaced a damaged fender after a loader hit it, then repaired the baffle inside a hydraulic tank. Another repair back in service and ready to work. 💪🔧

Need aluminum welding or repairs? We offer mobile aluminum welding, custom fabrication, repairs, and more. Give 13|12 Metalworks LLC a call for your next job!

A custom gate in the books! We had the opportunity to fabricate and hang this one-of-a-kind entrance gate, and the insta...
08/01/2026

A custom gate in the books! We had the opportunity to fabricate and hang this one-of-a-kind entrance gate, and the install went flawlessly. The best part is the custom logo—the "T" is built from the exact set of horns of the customer's prized longhorn, making this gate truly one of a kind.

We take pride in building more than just gates—we build pieces that reflect our customers and their story. Thank you Chris Cook for trusting 13|12 Metalworks LLC with your project! Big thanks to Lucas Dean Bornstein for the referral.

If you're looking for a custom entrance gate, pipe fence, carport, repairs, heavy equipment work, or mobile welding, give us a call for a free estimate.

📞 903-227-9276

Built with pride. Built to last.

Address

424 Barbara Lane
Sherman, TX
75020

Telephone

+19032279276

Website

Alerts

Be the first to know and let us send you an email when 1312 Metalworks LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 1312 Metalworks LLC:

Shortcuts

Share

Category