Beveltools USA

10/21/2026

A satisfying process from start to finish.

See the Beveltools TEBI in action and watch precision at work.

For more, visit www.beveltools.com

10/20/2026

The Bevel Mate® BEBA Battery machine. Mobile and just as powerful as the electric- and airtools. Bevel and round without restrictions.

09/03/2026

The EBA 3.0 has been Beveltools' flagship motor for years, trusted on steel construction sites, in shipyards, on offshore decks and many more places.

𝘞𝘦 𝘮𝘢𝘥𝘦 𝘪𝘵 𝘦𝘷𝘦𝘯 𝘣𝘦𝘵𝘵𝘦𝘳.

𝗠𝗲𝗲𝘁 𝘁𝗵𝗲 𝗘𝗕𝗔 𝟰.𝟬.

A more powerful motor and a revised fl**ge head mean faster beveling and less strain on every cutter for longer cutter life. Precise depth setting keeps every pass accurate. Improved ergonomics and reduced vibrations mean less fatigue on long shifts.

Every Bevel Mate cutter you own — v3.0, INOX, ALU — mounts straight onto the EBA 4.0. No new cutters. No new process. Just a beter machine on the tool line you already trust.

Running an EBA 3.0? Contact us or talk to your Beveltools dealer about upgrading: https://beveltools.com/contact/

Learn more about the EBA 4.0 here: https://beveltools.com/bevel-mate-eba-4-0/

𝘌𝘉𝘈 4.0 𝘰𝘯 𝘠𝘰𝘶𝘛𝘶𝘣𝘦: 𝘩𝘵𝘵𝘱𝘴://𝘺𝘰𝘶𝘵𝘶.𝘣𝘦/1𝘖𝘷𝘓𝘛𝘒𝘸𝘋𝘺8𝘬



https://youtu.be/1OvLTKwDy8k

The Bevel Mate® EBA 4.0 is the newest generation of the Bevel Mate® EBA electric machine — more torque than the 3.0, a new drive-pin-free fl**ge system for faster cutter swaps, and depth control precise to 0.05 mm.

07/31/2026

𝗖𝗼𝗿𝗱𝗹𝗲𝘀𝘀 𝗯𝗲𝘃𝗲𝗹𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝘁𝗵𝗲 𝗕𝗲𝘃𝗲𝗹 𝗠𝗮𝘁𝗲® 𝗕𝗘𝗕𝗔 𝟰.𝟬

No cable, no compressor. Create bevels up to 12 mm, radii up to R8, powered by a quality 18V Metabo CAS - Cordless Alliance System battery.

Built for jobs where a power outlet isn't an option.

Want to know if it fits your work? Get in touch:
https://lnkd.in/ec_6J6nt

06/22/2026

The TEBI 4.0 has gotten a smaller brother, the TEBI-M 4.0.

Built for our small Mini Mite™ cutters, this compact table machine is designed for controlled edge finishing on smaller workpieces.

𝗜𝗱𝗲𝗮𝗹 𝗳𝗼𝗿:

• 𝘙1 𝘢𝘯𝘥 𝘙2 𝘳𝘰𝘶𝘯𝘥𝘪𝘯𝘨
• 𝘚𝘮𝘢𝘭𝘭 45° 𝘤𝘩𝘢𝘮𝘧𝘦𝘳𝘴
• 𝘙𝘦𝘱𝘦𝘵𝘪𝘵𝘪𝘷𝘦 𝘴𝘮𝘢𝘭𝘭-𝘱𝘢𝘳𝘵 𝘧𝘪𝘯𝘪𝘴𝘩𝘪𝘯𝘨
• 𝘛𝘩𝘪𝘯 𝘱𝘭𝘢𝘵𝘦 𝘸𝘰𝘳𝘬

Instead of guiding the tool along the part, you guide the part along the cutter. That gives you more control, better handling and repeatable results.

𝗘𝘅𝗽𝗹𝗼𝗿𝗲 𝘁𝗵𝗲 𝗧𝗘𝗕𝗜-𝗠 𝗵𝗲𝗿𝗲:
https://beveltools.com/products/tebi-m/

05/28/2026

Plaatwerk- en Konstruktiebedrijf van de Klundert is a customer of official Beveltools dealer in The Netherlands, Metaaltechniek handelsonderneming b.v.

They are a steel fabrication company working on demanding projects like offshore platforms, drilling rigs, bridge construction, and transformer stations.

Edge finishing is a serious requirement in their field. Paint specifications at P3 level mean cut edges must be properly rounded to R2. With hundreds of meters of edges to process per project, doing it twice is not an option.

They told us how grinding used to make that difficult. Switching to the Bevel Mate® EBA changed that. Set it up correctly, replace the cutter on time, and the result stays consistent from start to finish. We also talked about working with laser- and plasma-cut S355, cutter wear and lubrication.

Read the full story here: https://beveltools.com/reviews/van-de-klundert-says/

04/22/2026

See the Beveltools BEBA in action as it creates a clean, consistent rounding on a metal plate using a pattented Beveltools cutter, quickly and without hassle of a cord.

The BEBA is a battery machine. combining mobility, ease of use, and reliable performance, making it a practical solution for fast edge finishing in the workshop or on site.

Looking for a faster way to round sharp metal edges?
Discover more at www.beveltools.com