Rocklin Manufacturing

Rocklin Manufacturing Established in 1934, home of the Rocklinizer, the MoldMender Micro Welder, and a full line of markin Founded in 1934, Rocklin Mfg. Rocklin Mfg.

manufactures the Rocklinizer Carbide Application Equipment for enhanced wear protection and gripping of metals, tools, and dies, and the MoldMender Micro Welder for mold and die repair. These products are exported to >40 countries through a worldwide sales network. is also the North American distributor of the battery-operated FlyMarker battery-operated marking system and a full line of Markator d

ot peen and scribe marking products, the LaserEvo laser marking units, and the Lase One Micro Welder.

05/28/2026

⚡ Which Rocklinizer carbide applicator is right for you?

Check out this “Sparks in 60 Seconds” clip comparing the deposit capabilities and key features of our three portable Rocklinizer models.

No matter which model you choose, you’ll get targeted wear protection and gripping through our proprietary hard surface coatings, applied exactly where you need them.

05/20/2026

When customers are powder coating, galvanizing, painting, sandblasting, or otherwise treating metal after marking, the key question becomes: will the mark still show up afterward?

In this one-minute video, you’ll see us run several marking options side-by-side on customer samples, including:

- Standard solenoid
- Heavy-duty solenoid
- Continuous line font
- MV5 M80 air-powered marking for extremely deep marks
- 2D Data Matrix codes for fitting more info into a small space

The customer then runs these samples through their actual production process and determines which option works best for them.

If you'd like us to complete samples or line up a demo on your parts, let us know!

05/11/2026

A customer came to us with a tough marking challenge: fit a large amount of text into a very small area while still keeping the mark clean, readable, and permanent.

We programmed the mark, ran a simulation, and dialed in the right settings with the FlyMarker mini STATION until we got the result they needed.

Here’s a quick 45-second recap of the process and final mark 🎬

05/07/2026

Customer had rust and paint building up on gas piping and was starting to look at replacing it, which would have been a $$$$ project.

We ran a demo with the LC/RR 2000 laser cleaner and were able to strip it clean quickly without impacting the base material.

They’re expecting to extend the life of the piping and avoid that kind of spend for years to come at multiple locations!

Here’s a 60-second video recap of the demo:

04/29/2026

A simple way to handle mold and die repair.

The MoldMender Micro Welder is low heat, portable, and easy to use. No welding experience needed.

In this 60-second clip, we build up an edge with A-2 ribbon and show the customer how to handle repairs in-house going forward...

We put together a few quick clips from the shop showing laser cleaning, portable marking, and automated Rocklinizer in r...
04/23/2026

We put together a few quick clips from the shop showing laser cleaning, portable marking, and automated Rocklinizer in real applications.

You can watch all three videos here: https://bit.ly/4eEUmQN

If you’re needing rust or paint removal, better part traceability, or improved wear protection or grip, take a look.

04/15/2026

How do we make sure every Rocklinizer Carbide Applicator is ready for the field?

We rigorously test every unit before it leaves our factory:

1. Visual inspection against a multi-step QA checklist
2. Hours of automated testing on one of our three in-house stations
3. Final hands-on testing to make sure it performs the way a customer will actually use it

Everything is designed, built, and tested at our factory in Sioux City, Iowa, just like we’ve done for decades. We’ve continued to refine the process over time, but the goal hasn’t changed: every unit works the way it should when it gets to you.

Here’s a 15-second clip showing our testing room in action 🎬

04/09/2026

Over the last 92 years, our products and technologies have evolved significantly, but our focus has remained much the same: driving real efficiencies and cost savings for our customers.

Today, we deliver fully portable solutions ranging from dot peen and laser marking to hard surface coating to micro welding to laser cleaning.

Here's a quick montage showing each of them in action. Take a look and get in touch if you'd like to try them for yourself!

03/23/2026

Grabbed the FlyMarker mini and walked around the shop marking whatever we could find!

No cords. No computer. No setup.

Just point, mark, and move on ⚡

Check out fully portable dot peen marking in under 2 minutes 🎬

Address

110 S. Jennings Street
Sioux City, IA
51101

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

(712) 255-6046

Alerts

Be the first to know and let us send you an email when Rocklin Manufacturing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rocklin Manufacturing:

Share