Nuclear Welding and Fabrication

Nuclear Welding and Fabrication General/Custom welding/fabrication services. Motorcycles,trailer,race car,etc. Repairs,replacements,MIG/TIG

Custom made 1/4" diamond plate picture frame for my boy Lawrence Kelly @ BLACKWATER.Came out pretty sweet.
09/03/2026

Custom made 1/4" diamond plate picture frame for my boy Lawrence Kelly @ BLACKWATER.
Came out pretty sweet.

🤔🤷🏻‍♂️🤣🤣🤣
08/19/2026

🤔🤷🏻‍♂️🤣🤣🤣

Rust repair on a tractor wheel today. They have a tendency to rot out where the valve stem goes through, hence the flat ...
08/14/2026

Rust repair on a tractor wheel today. They have a tendency to rot out where the valve stem goes through, hence the flat spot on the rim step.

Custom panel boxes for Ablamsky Electric. By yours truly. 💪🏻🇺🇸
07/22/2026

Custom panel boxes for Ablamsky Electric. By yours truly. 💪🏻🇺🇸

05/13/2026

Welp, all done...The owner is gonna put it through it's paces, and see if anything breaks. As for me, on to the next job. 🤘🏻

05/12/2026

So this is almost all done....Just have to do some last adjustments, and throw the nose and top on, and test it in a rough environment.
Gotta make sure it's up to my standards. 👍🏻🇺🇸

A bit more progress today. Towbar TIGGED up, Made the bottom leaf spring, Got the swivel pin, and the geometry all worke...
05/08/2026

A bit more progress today. Towbar TIGGED up, Made the bottom leaf spring, Got the swivel pin, and the geometry all worked out. Tomorrow is finish the steering rods, complete with spherical rod ends, then onto the next job🇺🇸

05/08/2026

HUGE shout out to FK rod ends! I procured 3 at Ro-brand, and of course I needed 4, so, I went straight to the source. FK not only got one for me, they just gave it to me for nothing. THANK YOU!!!

On with the f**kery.....today, got the bottom leaf spring set with the end links for the spindles, towbar mocked up. Tom...
05/08/2026

On with the f**kery.....today, got the bottom leaf spring set with the end links for the spindles, towbar mocked up. Tomorrow, spindle links, towbar center link for steering...

Customer's non-motorized golf cart that he hauls his daughter's around on, pulled behind his quad. Someone had pulled th...
05/06/2026

Customer's non-motorized golf cart that he hauls his daughter's around on, pulled behind his quad. Someone had pulled the front suspension off, and welded a towbar on front. Well, as it turns out, with no front wheels, it was very tippy, and unstable, so, I acquired a front end, and made it work. It's obviously not done yet, but you get the bigger picture. Now it'll have front suspension and wheels that will be connected to an articulating towbar, so that it has a turning radius. Also fixed the rear leaf spring perches, and fixed a bunch of cracked welds. &FABRICATION! Let's get your projects DONE!

Address

12 Highwood Avenue
Southington, CT
06489

Website

Alerts

Be the first to know and let us send you an email when Nuclear Welding and Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category