OEC Fluid Handling, Inc.

OEC Fluid Handling, Inc. OEC Fluid Handling is a distributor of process pumps, tanks, meters, mixers and filters.

Headquartered in Spartanburg SC with sales offices in Charlotte and Greensboro NC, OEC Fluid Handling provides quick technical support for the sizing and application of pumps, tanks, meters, mixers and filters for the transfer of liquid raw materials found in the chemical, pharmaceutical, textile, paper and food industries. OEC Fluid Handling can provide bulk tanks in 316 stainless steel, cross li

nked polyethylene and fiberglass to high volume users of dyes, defoamers, coatings, surfactants and chemicals along with transfer pumps and metering equipment. Let OEC Fluid Handling custom build a process pump and metering system that meets your specific liquid handling requirements.

OEC is proud to announce new relationships with SANDPIPER and EnviroGear, as well as expansion into Tennessee and Virgin...
10/20/2020

OEC is proud to announce new relationships with SANDPIPER and EnviroGear, as well as expansion into Tennessee and Virginia!

Blackmer, one of our oldest partners, just voted OEC Fluid Handling to be Blackmer Elite Tier. Thank you, Blackmer, for ...
06/13/2019

Blackmer, one of our oldest partners, just voted OEC Fluid Handling to be Blackmer Elite Tier. Thank you, Blackmer, for what you do for us. We are proud to represent such great products.

Blackmer Pump

We have represented Milton Roy metering pumps for years, both in sales and in evaluation and repair. Milton Roy has made...
06/13/2019

We have represented Milton Roy metering pumps for years, both in sales and in evaluation and repair. Milton Roy has made it official, and OEC Fluid Handling is now a certified authorized service center.

Thank you ARO for the Top Growth Award for 2018.
06/13/2019

Thank you ARO for the Top Growth Award for 2018.

We recently built this truck unloading system. The heart of the system is the 3" ARO stainless steel diaphragm pump, whi...
05/07/2018

We recently built this truck unloading system. The heart of the system is the 3" ARO stainless steel diaphragm pump, which can pump up to 275 GPM. The system also includes a Blacoh inlet stabilizer, and discharge pulsation dampener, for a more continuous flow. A volume, to unload, can be programmed into the Contrec batch controller. The mag meter sends a pulse signal to the batch controller, and the batch controller closes the automated discharge valve when the programmed amount has been reached.

05/07/2018

OEC Fluid Handling just finished two pump assemblies for a new customer. These units will be on a barge, and used to load/unload diesel fuel and gasoline, in remote locations. The main assembly consists of a Doosan D34 diesel engine coupled to a Nord SK72 gear reducer, which is coupled to a Blackmer HXL6G pump. This unit is capable of pumping around 750 GPM. The backup unit is similar, with the only difference being that it has a Blackmer X4B pump, which is capable of 500 GPM. We would like to thank our friends at Continental Engines - Generating Power Solutions for all of their help on these units.

1600 to 1700 gallons per minute. Gorman Rupp 6" x 5" centrifugal pumps with Teco 125 HP motors. You wouldn't pump water ...
10/09/2017

1600 to 1700 gallons per minute. Gorman Rupp 6" x 5" centrifugal pumps with Teco 125 HP motors. You wouldn't pump water with these, but if you did, you could empty an Olympic size pool in around 3 hours.

Weights and Measures approved Diesel Exhaust Fluid (DEF) 4050WM skid. It will deliver around 45 GPM. We can build as a p...
05/24/2017

Weights and Measures approved Diesel Exhaust Fluid (DEF) 4050WM skid. It will deliver around 45 GPM. We can build as a push cart, or in skid form as shown here. A ticket printer is also an option.

At the 2017 ISPE show in Raleigh today.
03/14/2017

At the 2017 ISPE show in Raleigh today.

It seems like we've been on the road a lot lately. We have managed to build a few things this week. This is an ethylene ...
02/02/2017

It seems like we've been on the road a lot lately. We have managed to build a few things this week. This is an ethylene glycol metering system. Each Milton Roy MROYA11 metering pump should put out around 1 L/Hr, at around 800 PSI. I kept my hands off during testing today. You really don't want to open the wrong valve at 850 PSI.

Here's one of our latest completions. Two Gorman-Rupp 8" x 6" pump assemblies with 100 HP electric motors. Capable of 21...
12/07/2016

Here's one of our latest completions. Two Gorman-Rupp 8" x 6" pump assemblies with 100 HP electric motors. Capable of 2100 Gallons Per Minute, @ 150 Ft. head. That's a serious amount of fuel, in a short period of time.

Address

140 Cedar Springs Road
Spartanburg, SC
29302

Opening Hours

Monday 8am - 5:30pm
Tuesday 8am - 5:30pm
Wednesday 8am - 5:30pm
Thursday 8am - 5:30pm
Friday 8am - 5:30pm

Telephone

(864) 573-9200

Website

Alerts

Be the first to know and let us send you an email when OEC Fluid Handling, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to OEC Fluid Handling, Inc.:

Shortcuts

Share

Category