T3 Lining Supply

Call Directions Website Contact the business

T3 Lining Supply Your one stop shop for cipp and trenchless needs.

06/30/2026

Proper pipe prep doesn't happen with one tool. It happens with the right combination of tools matched to what's in the pipe. T3's chain knocker and drill head lineup covers every level of cleaning and pe*******on.

Here's our complete chain knocker and drill head lineup, because not every pipe cleans the same way:

⚙️ Chain Knockers
For 2"–8" lines, compatible with 6mm–12mm cables. The reliable go-to for removing rust, dirt, and debris from pipe walls before lining.

⚙️ Chain Knockers with Drill Head
For 4" and 6" lines. One tool that sweeps the walls AND punches through blockages in a single pass.

⚙️ Circular Chain Knockers
For 3"–8" lines, 10mm or 12mm cable. Full circular contact for thorough, consistent wall coverage every time.

⚙️ Drill Heads
Pair with a centering device or chain knocker to aggressively take on roots, compacted debris, and hard reinstatements.

Right tool. Right pipe. Right prep. Which one are you reaching for most?

E-Roller 450 vs. E-Roller 600: which one do you actually need?Both are compact. Both are portable. Both run dual brushle...
06/23/2026

E-Roller 450 vs. E-Roller 600: which one do you actually need?

Both are compact. Both are portable. Both run dual brushless motors with precision gap control and hands-free foot switch operation. Both mount on a van, trailer, or work table in minutes.

But here’s where they’re different:

🔵 The 450 weighs 43 lbs (the 600 is 48)
🔵 The 450 measures 22.5” wide (the 600 is 30”)
🔵 The 450 works for liners up to 8” in diameter (the 600 goes up to 12”)

If the majority of your work requires liners at 8" and under, the 450 is your machine.

If you're running 10" or 12" liner or know you’re missing those opportunities, the 600 is the one to have.

It’s five pounds more, but it gives your team the capacity to take on a wider range of jobs without trading off portability, control, or setup speed.

A lot of contractors start with the 450 and add the 600 when their scope grows. Some run both. Either way, T3 has you covered.

Want to know which setup is right for your operation, or see everything T3 carries? Send us a message or comment "CATALOG" below and we'll get our full product catalog to you. Our team is happy to walk you through it.

📞 West Coast: 714-589-9260 | Midwest: 417-351-7851 | East Coast: 603-630-9678

For the serious contractor doing municipal-level pipe restoration, meet the Fixer C-MAX 12.👉 124 ft of 12mm cable👉 Indus...
06/16/2026

For the serious contractor doing municipal-level pipe restoration, meet the Fixer C-MAX 12.

👉 124 ft of 12mm cable
👉 Industrial steel frame
👉 4"–10" pipe capacity

This is the most powerful milling system in T3's lineup, and it's built to prove it every time you fire it up.

Tag a contractor who needs to see this.

If most of your jobs are service laterals and small-to-medium mainlines, the T3 Drum 130 was made for you.130 ft of line...
06/09/2026

If most of your jobs are service laterals and small-to-medium mainlines, the T3 Drum 130 was made for you.

130 ft of liner capacity, compatible with 3"–6" pipe, and heavy-duty locking wheels so it stays where you park it.

The right drum for the jobs that pay the bills.

An old, leaking pipe doesn't always need a full reline.The T3 Coating System applies seamless polyurea trenchlessly to 1...
06/05/2026

An old, leaking pipe doesn't always need a full reline.

The T3 Coating System applies seamless polyurea trenchlessly to 1.5"–8" drains and vents, rapidly restoring pipes without digging up the yard.

Great upsell. Great margin. Great results.

Who's adding coating to their service menu?

See what you've been missing underground.If you're doing CIPP lining without a professional camera system, you're workin...
06/02/2026

See what you've been missing underground.

If you're doing CIPP lining without a professional camera system, you're working blind, leaving money (and liability protection) on the table.

The Vivax Camera System from T3 Lining Supply changes that. Here's what our customers love about it:

🔵 HD clarity you can actually trust: 1080p self-leveling camera heads give you a stable, sharp picture no matter how the line runs
🔵 Document everything instantly: one-touch recording and JPEG capture make before-and-after documentation effortless
🔵 1 TB of onboard storage: carry your full job history right in the unit
🔵 All-day power: 4-hour battery with AC/DC flexibility keeps you in the field longer
🔵 Readable in daylight: the 9.7" HD display is bright enough for outdoor jobsite use
🔵 Built tough: stainless-steel reel and camera heads designed for the field, not the showroom
🔵 Always know your position: locatable sonde and traceable pushrod give you pinpoint accuracy in the line

The system comes complete with a Control Module, Reel, 200' of 12mm Pushrod, and the D34-HD camera head.

T3 Lining Supply is your professional one-stop shop for everything CIPP, and we back every product with real training and real support from people who've been in your shoes.

Comment "CATALOG" below or send us a message and we'll send you a link to download our full 2026 Product Catalog!

Want to get started with T3? Call your regional rep today:

📞 West Coast: 714-589-9260 | Midwest: 417-351-7851 | East Coast: 603-630-9678
🌐 t3liningsupply.com

The job doesn’t end when the liner cures. That’s where the T3 Reinstatement Cutter comes in.These robotic heavy-duty cut...
06/01/2026

The job doesn’t end when the liner cures. That’s where the T3 Reinstatement Cutter comes in.

These robotic heavy-duty cutters cut through the new liner to reconnect terminals and junctions with speed and precision.

DM or call to get pricing or a full catalog!

YOUR TURN: What’s the ugliest reinstatement you’ve had to do?

Not all reinstatements are clean and easy. Some pipes are cement, cast iron, or steel, and you need a cutter that won't ...
05/29/2026

Not all reinstatements are clean and easy. Some pipes are cement, cast iron, or steel, and you need a cutter that won't flinch.

T3 Reinstatement Cutters are robotic heavy-duty cutters capable of cutting, grinding, and milling through PVC, liner, cement, concrete, cast iron, and steel.

Powerful. Versatile. Built for the tough calls.

What's the hardest material you've had to cut through on a reinstatement?

05/22/2026

Here's the complete T3 cable machine lineup, from residential to heavy work:

⚙️ Mill Fixer 8
75 ft of 8mm cable, max 2250 RPM, for 2"–4" pipe. Compact and ideal for residential descaling and pre-coating pipe prep.

⚙️ Fixer 10
77 ft of 10mm cable, max 2250 RPM, for 2"–8" pipe. More reach, more torque, more pipe range. The versatile mid-size unit.

⚙️ Fixer C-MAX 12
124 ft of 12mm cable, max 2250 RPM, for 4"–10" pipe. Industrial steel frame. T3's most powerful milling system, built for the jobs that demand maximum performance.

Which fixer is in your van right now?

Working in a tight yard or basement today?We’ve got the perfect solution for your crew!Meet the T3 DRUM 70 Slim Inversio...
05/15/2026

Working in a tight yard or basement today?

We’ve got the perfect solution for your crew!

Meet the T3 DRUM 70 Slim Inversion Drum, your new go-to for 2”–4” residential service lines and tight-access CIPP rehabilitation.

Here’s why you'll love having it on the truck:

✅ Work Anywhere: The super slim profile (30” x 19” x 23”) means you can maneuver it easily in restricted areas.
✅ Easy to Carry, Big Capacity: No more breaking your back! It weighs only 54 lbs but packs enough room for up to 70 ft of 4” liner.
✅ Built Tough: Made in the USA and designed specifically for professional-grade efficiency.

Make your next residential job a breeze. Give your T3 Lining Supply regional sales rep a call today to get yours!

Address

4270 Hillcrest Avenue Suite 201
Springfield, MO
65810

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+14175304200

Website

Alerts

Be the first to know and let us send you an email when T3 Lining Supply posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to T3 Lining Supply:

Shortcuts

Share

Category