B&T USA

B&T USA B&T has been manufacturing only the finest Swiss-made defense products for nearly 30 years. US Dealers

B&T USA
4532 W. Kennedy Blvd. Colfax Ave. S. Buchanan St.

Suite 111
Tampa, FL 33609
Phone: 813-653-1200
Email: [email protected]

If you are interested in becoming a dealer for B&T products in the USA, please contact B&T USA. COLORADO


MACHINE GUN TOURS
Alan Samuel
12550 W. Suite 103
Lakewood, CO 80215
Phone: 303-993-8361
Email: [email protected]
www.machineguntours.com

DIRECT DEALER

DELAWARE


DELMARVA LAW ENFORCEMENT SUPPLY
27385 Parker Dr

ive
Dagsboro, DE 19939
Phone: 302-448-6946
Email: [email protected]
www.Dmvlesupply.com

DIRECT DEALER

FLORIDA


DELRAY SHOOTING CENTER
Mike Caruso Jr.
1505 Pointsettia Dr.
Suite H-6
Delray Beach, FL 33444
Phone: 561-265-0700
www.shootingcenters.com

DIRECT DEALER

SHOOT STRAIGHT
1349 S. Orange Blossom Trail
Apopka, FL 32703P
Phone: 407-889-0842
Email: [email protected]
www.shoot-straight.com

DIRECT DEALER

THE BULLET HOLE
Brooke Misantone 330
S Orange Avenue
Sarasota, FL 34236
Phone: 941-702-2413
Email: [email protected]
www.bulletholeonline.com

DIRECT DEALER

ONLY THE BEST FI****MS
Vito A Servideo
750 E Sample Road
Bldg 1 Bay 6
Pompano Beach, FL 33064
Phone: 954-545-1321
Email: [email protected]
www.onlythebestfirearms.com

DIRECT DEALER

WESTON ARMS SHOOTING SPORTS
7080 W. STATE ROAD 84
Davie, FL 33317
Phone: 954-792-1911
www.westonarms.us

DIRECT DEALER

GEORGIA


THE AR BUNKER
Lee Morris
1690 Hwy 34 E, Suite D
Newnan, GA 30265
Phone: 770-304-0138
Email: [email protected]
www.thearbunker.com

DIRECT DEALER

ILLINOIS


MICHAEL’S ARMS & ACCESSORIES
Mike Otte
439 STE A. Edwardsville, IL 62025
Phone: 618-692-5551
Email: [email protected]
www.michaelsmachines.com/michaelsarms

DIRECT DEALER

INDIANA



ELMORE´S FIREMARMS & ACCESSORIES
520 N State Road 135, Suite 1
Greenwood, IN 46142
Phone: 317-888-5400
www.elmoresfirearms.com

DIRECT DEALER

MARYLAND


DUFFY’S GUN ROOM
15433 Falls Rd. Sparks, MD 21152
Phone: 410-771-4398
Email: [email protected]
www.duffysguns.com

DIRECT DEALER
MISSOURI


OSAGE COUNTY GUNS
148 Pepper Lane
Belle, MO 65013
Phone: 573-859-6044
Fax: 314-558-8429
Email: [email protected]
www.osagecountyguns.com

DIRECT DEALER

NORTH DAKOTA


THE ATTIC
Don Schall
2800 South Broadway
Minot, ND 58701
Phone: 701-852-4000
Email: [email protected]

DIRECT DEALER

OHIO


NORTHWEST OHIO INT. LTD. Joe Rusin
5750 West Alexis Rd. Sylvainia, OH 45360
Phone: 419-824-0600
Email: [email protected]
www.northwestohiointernational.com

DIRECT DEALER

G&R TACTICAL
Grant Timberlake
1315 N Wooster Ave. Suite B
Strasburg, OH 44680
Phone: 330-343-2800
Email: [email protected]
www.gandrtactical.com

MASTER DEALER
TEXAS


SPARTAN HOPLITE ARMS
Nikolaos Kakomanolis
900 South Main Street
Suite 320
Keller, TX 76248
Phone: 682-593-0996
Email: [email protected]

DIRECT DEALER

UTAH


HK PARTS (parts and accessories only)
Adam Webber
106 E. 13200 South
Draper, UT 84020
Phone: 801-987-3494
www.hkparts.net


VIRGINIA


W.A.R. RIFLES
Andrew Walter
8391 Euclid Ave. Unit H
Manassas Park , VA 20111
Phone : 703-367-7155

DIRECT DEALER

Battleware Technologies, Inc. Carey Lewis
11263 Airpark Road, Suite B4
Ashland, VA 23005
Phone : 804-752-3560
Fax: 804-752-3561
Email: [email protected]
www.battleware.com

DIRECT DEALER

WYOMING


RTG PARTS (parts and accessories only)
Robert Johnson
931 Frank St. Sheridan, WY 82801
Phone: 623-362-3459
Email: [email protected]
www.robertrtg.com

DIRECT DEALER

GMP PARTS CO
John Flagg
11 Quarking Aspen Way
Etna, WY 83118
Phone: 307-883-7500
Email: [email protected]

DIRECT DEALER

08/03/2026

Powder to part. Print to finish. Bench to box.

This is what it actually takes to build a suppressor right. Every can starts as titanium powder, grown layer by layer on the print bed, no welds, no shortcuts. From there it’s finished by hand, then inspected, packed, and shipped, all under one roof, all here in the U.S.

Same process. Every single can. No exceptions.

This is the floor. This is Engineered Certainty.

Cutting a suppressor down usually means giving something up, weight, durability, or how much heat it can actually take. ...
07/30/2026

Cutting a suppressor down usually means giving something up, weight, durability, or how much heat it can actually take. The XH-556 SC doesn’t make that trade. Same hybrid build as the full-size XH-556, a 3D printed titanium body paired with a 718 Inconel blast baffle, just trimmed down to 5 inches and under 9 ounces for builds where every bit of length matters. Reduced Backpressure System still holds bolt speed increase under two percent, so short barreled setups don’t get punished with extra blowback the way they do on a lot of subcompact cans. No barrel length restrictions, full auto rated, and it’s been run through the same SOCOM level testing past 22,000 rounds as its full-size counterpart.

Every suppressor starts as a build plate right here in UT, not a blueprint on someone else’s manufacturing floor. Layer ...
07/21/2026

Every suppressor starts as a build plate right here in UT, not a blueprint on someone else’s manufacturing floor. Layer by layer, our printers grow each can from titanium powder into a finished part, the same process, the same tolerances, run right here in the U.S, under our own roof. From there it’s hand finished and cleaned to spec, because a suppressor that looks right and runs right takes more than a printer to get there.

Engineered Certainty, and American Made.

Factory-integrated. Zero compromise. Rarebreed Triggers’ SG-3 is now built into this exclusive SPC9 and GHM9 platforms s...
07/18/2026

Factory-integrated. Zero compromise.

Rarebreed Triggers’ SG-3 is now built into this exclusive SPC9 and GHM9 platforms straight off our production line. It’s a complete system, assembled and tested in-house before it ever reaches you.

Two teams that don’t cut corners on precision, working side by side through design, production, and testing. The result is a platform proven to perform before round one.

This is what factory-direct should look like.

x B&T USA

Engineered Certainty

If you liked the B&T Hush Puppy G***k series, you will love the B&T Stealth Lock SIG series. Featuring a completely uniq...
07/16/2026

If you liked the B&T Hush Puppy G***k series, you will love the B&T Stealth Lock SIG series. Featuring a completely unique and innovative slide lock for “stealth mode”, designed by B&T.

Available exclusively through

Four ounces. Five point one inches. Numbers that small usually l mean a suppressor that cuts corners somewhere. The TiGE...
07/14/2026

Four ounces. Five point one inches. Numbers that small usually l mean a suppressor that cuts corners somewhere. The TiGER22 doesn’t. It’s 3D printed from a single piece of titanium, no welds, no seams, no weak points baked into the build. That construction is what lets it run .22 LR, .22 Mag, 5.7x28, and even bolt action .223 without adding meaningful weight or length to whatever you’re shooting it on. Full auto rated for rimfire, standard 1/2x28 threading, no adapters required. Built to disappear on the gun and make shooting more enjoyable.

Small can. Zero compromise.

B&T AG and B&T USA have reached a settlement More information coming soon
06/25/2026

B&T AG and B&T USA have reached a settlement

More information coming soon

You’ll see us there before you hear us.
03/04/2026

You’ll see us there before you hear us.

02/27/2026

Precision PDW with AR familiarity and Swiss reliably.

🗓️ When: Saturday & Sunday, Feb 28th & March 1st 2026🕰️ Time: 10:00 AM – 4:00 PM (Gates open to customers at 9:00 AM)🗺️ ...
02/24/2026

🗓️ When: Saturday & Sunday, Feb 28th & March 1st 2026
🕰️ Time: 10:00 AM – 4:00 PM (Gates open to customers at 9:00 AM)
🗺️ Where:
Manchaca Range
3001 Old Bliss Spillar Road
Manchaca, TX 78652

Address

Tampa, FL

Telephone

(813) 653-1200

Website

Alerts

Be the first to know and let us send you an email when B&T USA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to B&T USA:

Shortcuts

Share

Category