Clouse Welding & Fabrication

Clouse Welding & Fabrication We are a welding and fabrication shop that cover just about anything you can think of. If can be welded we can weld it, if it can be built we can build it.

Also offer full service on location repair.

Turned an old jet ski trailer into a kayak trailer. Had to extend the trailer by 6ft and add a top rack.
04/07/2022

Turned an old jet ski trailer into a kayak trailer. Had to extend the trailer by 6ft and add a top rack.

Recently built a food trailer from scratch for Greg and Kimberly Spears. Smokey G's grand opening will be middle of Apri...
04/07/2022

Recently built a food trailer from scratch for Greg and Kimberly Spears. Smokey G's grand opening will be middle of April. Go check them out and get some awesome BBQ. Thank you both for the business.

Repair job we just completed on a grain truck for Mr. Doug Goodman. Got him in and out in about 3 hrs so he could get ba...
10/28/2021

Repair job we just completed on a grain truck for Mr. Doug Goodman. Got him in and out in about 3 hrs so he could get back to running and finish the last leg of harvest. Thank you we appreciate your business

Another boat needing a little tlc which we did by adding false floor, removed existing seats midway in boat, patched a c...
10/23/2021

Another boat needing a little tlc which we did by adding false floor, removed existing seats midway in boat, patched a couple holes so it'll stay nice and dry, fabricated some heavier duty gussets to support transom, added hercu-liner for added traction, and lastly topped it off w a fresh coat of paint. Thank you Jackson Seals we highly appreciate your business. Anyone needing any work from steel, stainless, aluminum, or whatever the case may be give us a shout and we'll gladly fix you up

Boat we recently overhauled removing existing benches, added foam w/ foam, fabricated front deck w/ dry and spot for fue...
10/23/2021

Boat we recently overhauled removing existing benches, added foam w/ foam, fabricated front deck w/ dry and spot for fuel tank, fabricated float pods, rebuilt transom, fabricated splash guard, applied hercu-liner bed liner to the whole inside of boat, and lastly give it a fresh paint job to top it of. Whew 🥵 Big thanks to Will Thompson we appreciate your business

Just now getting around to posting but is an almost complete overhaul done on a catfish fisherman's boat. Fabricated a s...
09/18/2021

Just now getting around to posting but is an almost complete overhaul done on a catfish fisherman's boat. Fabricated a splash well, completely rebuilt transom, relocated consoles to allow for more room, then topped it of w a fresh paint job. Thank you Neramiah Johnson we appreciate your business

Would like to say thanks to Keith Brooks for the opportunity to create this memorial saddle rack in honor of Ashley Broo...
09/14/2021

Would like to say thanks to Keith Brooks for the opportunity to create this memorial saddle rack in honor of Ashley Brooks. We appreciate the business.

Another boat we fixed up for sammie cooper.
09/14/2021

Another boat we fixed up for sammie cooper.

Big thanks to one of our most frequent customers Sammy Cooper. This is just 1 of about 5 of his boats we've done for him...
09/14/2021

Big thanks to one of our most frequent customers Sammy Cooper. This is just 1 of about 5 of his boats we've done for him. Thanks again for the continued business.

We would like to thank Ben Burnett for letting us fix his boat up. We added aluminum floors, pods and a new paint job. ...
09/14/2021

We would like to thank Ben Burnett for letting us fix his boat up. We added aluminum floors, pods and a new paint job. Thanks for the business.

We would like to thank Richie Pair for letting us build a mount for his anchor. Thanks for the continued business.
09/14/2021

We would like to thank Richie Pair for letting us build a mount for his anchor. Thanks for the continued business.

Address

3616 Ken-Tenn Highway
Union City, TN
38261

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 8am - 12pm

Telephone

(731) 446-6204

Website

Alerts

Be the first to know and let us send you an email when Clouse Welding & Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Clouse Welding & Fabrication:

Shortcuts

Share

Category