Barnes Precision Machine Inc

09/10/2026

Was always awesome working with yall “back in the day”….

Kept this pic on the office wall at Barnes Precision Machine since it was sent to us back in 2013….Back when Jerry said our handguard profile was the smallest he had seen - and it fit your hand really well, and he bragged on our r***es / barrels and consistency.
Much respect , as always .
👍
Got a few others that are really cool.
Hope you and yours are doing well.

🇺🇸🦾🔩⚙️🛠️🪛📚💻✊👍

18/09/2026

Black & Tan …..
Cause-
This dog will hunt …..(see picture in comments )

Barnes Precision Machine Inc.
LR10 in 6.5 Creedmoor
1-8 twist
24 “ heavy barrel 937 dia gas block journal
140gr. ELD 🎯

🇺🇸🦾🔩⚙️🛠️🪛📚💻✊🔥

15/09/2026

Bullet setback can happen in various calibers often with the same over Pressure event results.
5.56 am******on , even with crimp on projectile Can be pushed back into cartridge case where it now becomes a hand gr***de if actually loaded into the chamber, and the weapon is fired. Least path of resistance is usually the extractor where cartridge case bursts releases pressure into action with results as pictured here. This very same thing can happen when 300 blackout is loaded into a 556/223 chamber barrel and inertia of bolt carrier group forces projectile back into case , or forward assist is engaged , compressing projectile , as well as powder which causes a bigger bang, but can also happen in subsonic loads. 30 caliber projectiles can be “swaged” down to 22 caliber as they are forced through the barrel, with possibly no catastrophic failure 👁️👁️🧐🤔
as has been seen with 4 to 5 .30. Cal projectiles stacked in a .22 cal barrel …..
with one poking out of the muzzle. 🤷🏻🤦🏻‍♂️
No BS.
….weapon held pressure while it was fired multiple times, user(s) thought they was missing target …..
when actually projectiles never left
the barrel.

Do not pick up rounds off the range that possibly have been set back and load them into a weapon and fire them or this is a very real possibility. Not just the wrong caliber Am******on in the wrong caliber weapon.
Also ,
Make sure to use correct caliber flash hider / brake /attachment / mount with your suppressor of choice ….
👁️👁️
A .22 cal muzzle device will swage a.30 cal projectile out of a .30 cal barrel as well , down to .22 cal , shred the projectile , and dump it all into your suppressor in little PCs .
👁️👁️🤷🏻

Kinda like building a small block Chevy , no piston to valve clearence , and putting a big ole cam in it …. and then not doing a mock assembly / rotating the engine with clay on top of piston, to check - piston to valve clearence.
🤣

Excellent post keep up the good work FG&G!

🇺🇸🦾🔩⚙️🛠️🪛📚✊👍

An expensive lesson👀🚨PSA: ALWAYS double-check what ammo your mags are loaded with. Wrong caliber, wrong chamber, bad day. Stay safe out there. ⚠️300 Blackout round being loaded into a 5.56 chamber. Fortunately, no one was hurt.

(919) 552-4945 - Give the guys a call!
[email protected] - Send us an email!

13/09/2026

BPM Inc LR 10
In 7.62x51 NATO (.308Win)
1-8 and 1-10 twists
Or
6.5 Creedmoor caliber
1-8 twist
20"/24" heavy profile / .937 dia gas block register.
Based on KAC pattern platform, compatible with M110, upper / lower.

🇺🇸🦾🔩⚙️🛠️🪛📚✊

26/08/2026

still here ….
🇺🇸🦾🔩⚙️🛠️🪛🧰📚💻✊👍

24/08/2026

Uhhhh.
🤔🧐👁️👁️
🤦🏻🤷🏻

Those of us in industry who were invited by official DOD solicitation ,and built / tested , and shipped to Picatinny Arsenal the ICSR ( “Intermediate Combat Service R***e “ )along with M80A1 steel tipped am******on🔥🔥🔥🔥 (similar to m855A1) were required to have shipped a 7.62 x51 select fire 🔥, 14.5”/16” M4 type / size /configuration , that would pass 200 rd battle pack load , with no malfunctions on full auto , with industry ( OSS/ Huxwrks) QD 7.62 model suppressor shipped with gun for T&E.
Solicitation requires us to order am******on from Lake City , to perform required testing .
That s**t was HOT🔥.
Don’t know pressures , but it’s up there .
The main reason for interest by those in power / decision making , was that 5.56mm m855A1 would not pe*****te Chinese / North Korean body armor .
So M80A1 was developed - but needed industry to put its best foot forward with samples of ICSR’s.

Guns ran well , passed required tests, with required ammo.
The users manual was a job in itself .
🤷🏻
History for us , and several others that participated.

Official letter we received 8 months later when r***es were returned to Barnes Precision Machine Inc .,
Was that the program was suspended , because of lack of funds.

IYK
YK .
🇺🇸🦾🔩⚙️🛠️🪛📚💻✊👍

10/08/2026

To all you party hacks in America “Democrat and Republican “……🙄🤦🏻
I’m an independent,
I eat lettuce / greens like a starving rabbit …..🐇 and I ain’t s**t mahsef yet…..
🤣🤣🤣🤣🤣
Just sayin’.

You political Humans are fu***ng silly.
👁️👁️🤷🏻

🇺🇸🦾🔩⚙️🛠️🪛📚💻✊👍🥬🐇

Amid the ongoing investigations into outbreaks of both "explosive diarrhea"-causing cyclospora and salmonella affecting dozens of states, the daily headlines are reminiscent of past foodborne illness crises that gripped the nation. https://www.wfla.com/news/national/how-does-cyclospora-compare-to-some-of-the-worst-outbreaks-in-us-history/

09/08/2026

Very cool -
Years ago , about the time you were using my uppers / barrels / handguards …
I had hurt my lower back lifting stuff in shop , that should have been lifted with a forklift …🤣
I started using an inversion table ..to stretch - did it several times with 3 gun rig,retention style holster , shell caddies…tight mag pouches …
Hang there till my head filled with blood , and back stretched out ….fumblin mags / shells , guns …
All my buddies sayin’
You silly Barnes …
🤣
Of all the quad Loading , mag dropping , carving on a mag well videos I did , I didn’t do that one …..☝️
They just didn’t realize how cool I was , back in the day .
😎

Now they know .
😉

Keep up the good & the cool work .

Much respect as always -

🇺🇸🦾🔩⚙️🛠️🪛📚💻✊👍