Rockmount Research and Alloys

Rockmount Research and Alloys Maintenance Welding Alloys Designed to Weld Stronger and Last Longer

06/11/2026

🔥 This might be the hottest demo you’ll ever see.

A torch melts a penny sitting on top of Flamehold… while someone is HOLDING it in their bare hand. 👀🔥

The penny melts from the extreme heat, but the Flamehold prevents that heat from transferring through the material. Then it gets crushed back together and reused again like nothing happened. ⚡️

This stuff is seriously insane.

⚠️ DO NOT try this yourself. Professional demonstration only.

Would you believe this if you didn’t see it? 👇

06/09/2026

Polaris A was built for high stress, vibration, and constant movement with 95,000 PSI tensile strength and 33% flexibility. 💪⚡️

That means stronger welds that won’t crack under pressure.

✔️ Moisture resistant
✔️ Low hydrogen
✔️ High flexibility
✔️ Built for excavators, loaders, and heavy equipment

When the job is critical, this is the rod you want in your stinger.

Would you run this on your equipment? 👇

06/07/2026

🔥 This is why welders LOVE Tartan AAA.

Rain? Snow? Mud? Doesn’t matter. 👀

Tartan AAA is completely moisture resistant and built to weld through contamination thanks to its triple deoxidizing flux pulling impurities into the slag while leaving behind a CLEAN weld. ⚡️

86,000 PSI strength.
28% flexibility.
And smooth enough to weld around corners and out of position.

From farm equipment to trailers, this rod gets it DONE 💪

What’s the toughest thing you’ve welded in the field? 👇

06/05/2026

Most people ruin drill bits without even realizing it 👀🛠️

Here are the TWO biggest things that matter when drilling a perfect hole:

⚡ Correct speed
⚡ Correct pressure

When your settings are right, you’ll get those long, tight pigtail shavings every time and your bits will LAST. 🔥

Wrong speed = burnt chips, overheated bits, and wasted money.

That’s why Macho ST trusts RockMount LaserBest bits built to be resharpened and used for the long haul 💪

What do YOUR chips usually look like? 👇

06/03/2026

🔥 This might be the MOST underrated welding tool in the shop.

FlameHold doesn’t just resist heat. It acts like an extra set of hands. 👀

In this build, it holds the piece perfectly in place while we weld with Neptune AAA aluminum rod… and even after the heat, it stays solid without burning, boiling out, or transferring heat. ⚡️

No clamps. No struggle. Just smarter welding.

Would you use this in your shop? 👇

06/03/2026

⛏️ Rockmount is headed to the Elko Mining Expo!

As one of the largest and longest-running mining expos in the Western U.S., the event brings together thousands of mining professionals and more than 350 exhibitors from across the industry.

📅 June 4–5, 2026
📍 Booth 741 | Elko Convention & Conference Center

Stop by and meet Mark and Chris to learn how Rockmount's repair and maintenance welding solutions can help you keep equipment running and get the job done better, faster, and easier.

🤝 See you in Elko!

06/01/2026

🔥 Talk is cheap. The hammer test isn’t.

Brutus A runs an 1/8” rod at 100 amps, tying high carbon steel to mild steel with a CLEAN weld… then smacks it with a hammer to prove it holds. 👊⚡️

No cracks. No failure. Just solid fusion.

That’s REAL weld quality.

Would you trust this weld? 👇


04/20/2026

The job doesn’t stop for perfect prep.

POLARIS A welds through dirt, paint, grease, and rust while delivering strong, ductile welds that hold up to impact, vibration, and cold.
No moisture headaches. No compromises.

Built for the toughest repairs in the field.

04/07/2026

Rusty. Greasy. Frozen. Shaking itself apart.

Polaris A was built for exactly that. Moisture-resistant, contaminant-tolerant, with the ductility to handle impact and vibration that would crack a lesser weld.

Think 7018, but way better.

03/31/2026

Tartan AAA is built for the real world, not the lab. Paint, rust, grease, wet conditions… no problem. This all-position rod delivers strong, clean welds where others struggle. Tartan AAA is the go-to for service trucks, farms, and tough field repairs.

Because in the field, reliability isn’t optional.

Address

11909 NE 95th Street
Vancouver, WA
98682

Alerts

Be the first to know and let us send you an email when Rockmount Research and Alloys posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rockmount Research and Alloys:

Share