SRQ Welding

SRQ Welding Custom Marine Fabrication | Specialists in anodized aluminum welding & pipe bending

🤫🤫🤫 big things coming with the big dogs over at Exuma Boatworks 😎
08/18/2026

🤫🤫🤫 big things coming with the big dogs over at Exuma Boatworks 😎

06/17/2026

1991 Hewes Redfisher completed 🔥🎣

On this build we fabricated and installed a custom half tower, built the starboard platform, cut and installed the seadek, and sourced the electronics box to tie everything together.

Big shoutout to for handling the rigging and helping bring this project across the finish line.

This is what happens when a classic hull gets the attention it deserves.

Built to fish. Built to last.

📍 Sarasota, FL

06/12/2026

Progress update on this 2008 Southport 30’.

The custom tower fabrication is complete and ready for the next stages of the build.

This project will also receive:

• Custom hardtop skin
• Radar installation
• Outriggers
• Grey Line-X coating

One of our favorite parts of any tower build is seeing it in raw aluminum before it gets coated. Every bend, fit-up, and weld is visible, and that’s where quality fabrication separates itself.

Looking forward to sharing the finished product once everything is installed and rigged.

📍 Sarasota, FL

If you’re considering a custom tower, hardtop, or marine fabrication project, send us a message.

We recently had the opportunity to work with the Sarasota County Marine Unit on a custom setup for their Yellowfins.This...
05/20/2026

We recently had the opportunity to work with the Sarasota County Marine Unit on a custom setup for their Yellowfins.

This project included fabricating and installing a custom light bar bracket along with hose holders to keep their equipment secure, organized, and ready for deployment.

Marine enforcement boats operate daily in tough conditions, so strength, fitment, and long-term durability are critical. Every component was built with that in mind.

We’re proud to support the crews who keep our waterways safe.

📍 Sarasota, FL
📞 Contact SRQ Welding for custom marine fabrication projects.

04/22/2026

This 1991 Hewes Redfisher is getting a full second life.

We fabricated and installed a custom half tower and cut + installed new SeaDek throughout the boat to match the layout and give it a clean, modern finish.

Cushions are currently being wrapped up and the helm box is being color matched to the hull to complete the transformation.

It’s always great taking a classic hull with solid bones and turning it into something that feels brand new again.

If you have an older boat that needs upgrades, fabrication, SeaDek installation, or custom aluminum work — we can help bring it back the right way.

📍 Sarasota, FL
📞 Message us to talk about your project.

Just wrapped up this brushed anodized poling platform for a local flats boat.Fabricated from marine-grade aluminum and f...
04/06/2026

Just wrapped up this brushed anodized poling platform for a local flats boat.

Fabricated from marine-grade aluminum and finished in brushed anodized for corrosion resistance and a clean, high-end look. Built for stability, visibility, and durability in shallow water conditions.

Every platform we build is custom fit to the boat to ensure proper height, stance, and long-term strength in saltwater environments.

If you’re running the flats and want a solid, professionally built platform — we can design and fabricate it to match your setup.

📍 Sarasota, FL
📞 Message us directly to discuss your project.

Here’s a custom swing-back leaning post we recently completed for a local boat owner.This project was designed and fabri...
04/01/2026

Here’s a custom swing-back leaning post we recently completed for a local boat owner.

This project was designed and fabricated from polished marine-grade aluminum and features a pivoting backrest for forward or rear-facing seating, a hinged seat base, and a custom-built storage box beneath the cushion for added functionality.

Whether you're cruising, fishing, or running offshore, a well-built leaning post makes all the difference in comfort and performance. Every piece we build is custom-tailored to the boat and owner’s needs, ensuring strength, durability, and a clean, professional finish.

If you’re considering upgrading your helm seating or adding custom marine fabrication to your boat, we’d be happy to help.

📍 Located in Sarasota, FL
📞 Message us or call to discuss your project.

This aluminum Jon boat came to us needing some serious attention.We stripped it down, repaired and reinforced the transo...
03/30/2026

This aluminum Jon boat came to us needing some serious attention.

We stripped it down, repaired and reinforced the transom, fabricated new aluminum components, installed custom rear pods, and gave it the upgrades it needed to get back on the water with confidence.

Our goal with every project is simple: build it strong, build it clean, and build it to last in the harshest conditions.

If you have a boat that needs structural repair, modifications, or custom fabrication, we’re here to help.

📍 Located in Sarasota, FL
📞 Message us directly or call to schedule your project.

Address

121 Triple Diamond Boulevard
Venice, FL
34275

Opening Hours

Monday 7am - 5:30pm
Tuesday 7am - 5:30pm
Wednesday 7am - 5:30pm
Thursday 7am - 5:30pm
Friday 7am - 5:30pm

Telephone

+19412759942

Website

Alerts

Be the first to know and let us send you an email when SRQ Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to SRQ Welding:

Shortcuts

Share

Category