What are the opening hours?

Monday 6am - 4pm Tuesday 6am - 4pm Wednesday 6am - 4pm Thursday 6am - 4pm Friday 6am - 4pm

JRH Contracting

Name: JRH Contracting
Address: 1945 East 1500, Vernal, UT, 84078, US
Telephone: +14358282957

Home
United States
Vernal, UT
JRH Contracting

Call Directions Website

Oil & Gas Contractor | Pipeline Construction | Certified Welding | Well Hookups | 30+ Years in Vernal, UT

10/22/2026

n the Basin, a good pumper is the first line of defense against a winter freeze-off. 🛢️❄️
Uinta crude is waxy, so once it gets cold, the small stuff on a route turns into big stuff fast. Here's what our contract pumpers keep an eye on from now through February:
→ Burners and tank heaters lit, and holding temp, every visit
→ Treater temperatures where they should be
→ Dump lines and heat trace actually working, not just "on"
→ Tanks gauged and warm enough to load before the haulers show up
→ Anything that looks off, called in the same day, not saved for the weekly report
None of it is complicated. It just has to get done every single day, in the dark, in the cold. That's the job, and our pumpers take it seriously.
Need route coverage or a reliable pumper for the winter? Let's talk.
📧 [email protected] | 📞 John: 435-828-7519
📧 [email protected] | 📞 Austin Hatch: 435-828-2957 or 435-828-7520
🌐 www.jrhcontracting.com

10/16/2026

Pressure testing a line in October is easy. Doing it in January is a whole different job.
A few things our pipeline crews plan for when the Basin starts getting cold:
→ Test early. A test in October has a lot more room for weather delays than one in December.
→ Plan the dewatering before you fill. Water left sitting in a low spot can freeze, plug the line or damage the pipe. Know how you're getting it out, and where it's going.
→ Watch the temperature with the pressure. Water loses pressure as it cools, so a cold night can make a good line look like it's leaking. Log the temps so nobody chases a leak that isn't there.
→ Talk freeze protection before the crew shows up. If a test has to happen in freezing weather, agree on the approach with the operator up front, per their spec.
None of this is fancy. It just keeps a test from turning into a do-over.
Have lines that need testing before the cold sets in? We're putting fall schedules together now.
📧 [email protected] | 📞 John: 435-828-7519
📧 [email protected] | 📞 Austin Hatch: 435-828-2957 or 435-828-7520
🌐 www.jrhcontracting.com

10/08/2026

Every October in the Basin, we see the same thing: a site that ran fine all summer freezes off in the first cold snap.
Uinta crude is waxy. Once it cools, it stops wanting to move — and a frozen dump line at 5 AM in January costs a lot more than an afternoon of prep in October.
Here's what our production crews check before the first hard freeze:
→ Heat trace working end-to-end, not just powered on
→ Insulation intact on dump lines and meter runs
→ Tank heaters and burners tested and lit
→ Low spots on water lines drained
We've been doing this in the Uintah Basin since 1994, and the sites that make it through winter clean are almost always the ones that got looked at early.
Want a second set of eyes on your pads before November? We're scheduling fall walk-throughs now — reach out:
📧 [email protected] | 📞 John: 435-828-7519
📧 [email protected] | 📞 Austin Hatch: 435-828-2957 or 435-828-7520
🌐 www.jrhcontracting.com

# UintaBasin

10/02/2026

NOW HIRING: LABORERS

JRH Contracting, Inc. is looking for motivated, safety-minded individuals to join our team as Laborers in the oil and gas industry.

📍 Mostly local work in the Uinta Basin

We are seeking dependable team members who take pride in their work, prioritize safety, and work well with others.

Qualifications & Requirements

* Experience in the oil and gas industry preferred.
* Safeland training preferred.
* Training will be provided to selected applicants.
* Current Utah driver's license required.
* Must be safety-conscious and willing to work as part of a team.
* Must pass pre-employment and random drug and alcohol testing.

Benefits

* Competitive wages (DOE — Depending on Experience).
* Health insurance after the probationary period.
* Vacation benefits after the probationary period.
* Additional benefits may be available.

How to Apply

Interested applicants can submit an application or resume through the following options:

📍 Drop Off:
JRH Contracting, Inc.
1945 E. 1500 S.
Vernal, UT

📬 Mail:
JRH Contracting, Inc.
P.O. Box 1068
Vernal, UT 84078

📧 Email: [email protected]

Join the JRH Contracting team and be part of a company committed to safe, dependable, and quality work.

09/25/2026

Why Pipeline Coatings Matter More Than You Think

A pipeline's coating determines whether it runs reliably for decades or fails early from corrosion — making coating quality one of the most consequential decisions in midstream infrastructure.

What Coatings Actually Prevent

Bare steel exposed to soil, moisture, and process fluids corrodes — it's not a question of if, only when. Protective coatings and fiberglass reinforcement create the barrier that stops that process before it starts:

✓ External corrosion from soil contact and moisture exposure
✓ Internal corrosion from water content and process chemicals
✓ Coating failure at girth welds — a common weak point if left unprotected
✓ Structural degradation in tanks, vessels, and containment systems
✓ Chemical attack from produced fluids and process contaminants

The Cost of Skipping It

Corrosion doesn't announce itself. It builds quietly until a leak, a failed inspection, or an unplanned shutdown forces the issue — at a far higher cost than proper coating would have been:

Emergency repairs cost more than scheduled maintenance
Unplanned downtime halts production and revenue
Leaks trigger environmental and regulatory exposure
Replacing failed infrastructure costs far more than protecting it
Fiberglassing Adds Another Layer

For tanks and containment systems, fiberglass reinforcement (FRP) goes beyond a protective coating — restoring structural integrity on aging assets and extending service life on equipment that would otherwise need full replacement.

Why This Matters for Uintah Basin Operators

With new well pads and pipeline tie-ins moving forward across Uintah and Duchesne counties, infrastructure built and coated correctly now avoids the repair costs and downtime that catch up with operators later. Coating quality isn't a line item to cut — it's what determines whether new infrastructure runs for 30 years or 10.

JRH's Coating & Fiberglassing Experience

For 30+ years, JRH Contracting has applied protective coatings and fiberglass systems to pipelines, tanks, and treaters across Wyoming, Colorado, and Utah — built to extend service life and reduce long-term costs.

Need protective coating or fiberglassing for pipeline or tank infrastructure? Contact JRH Contracting.

📧 [email protected] | 📞 John: 435-828-7519
📧 [email protected] | 📞 Austin Hatch: 435-828-2957 or 435-828-7520
🌐 www.jrhcontracting.com

(pipeline coating, fiberglass reinforcement, corrosion prevention, protective coating services, tank and pipeline protection)

09/17/2026

Knock-for-Knock Indemnity: What It Means on a Multi-Contractor Site?
Knock-for-knock indemnity means each company on a job site is responsible for its own people, equipment, and losses — regardless of who caused the incident.
How It Works
Under a standard oilfield MSA, if JRH's equipment is damaged, JRH's insurance covers it — even if another contractor's mistake caused the damage. If another contractor's employee is injured, their company covers it — even if JRH's crew was involved. Each party looks to its own coverage first, rather than litigating fault after every incident.
Why the Industry Uses This Model
✓ Avoids drawn-out litigation over who's at fault after every incident
✓ Each company insures and controls its own people and equipment
✓ Keeps projects moving instead of stalling over liability disputes
✓ Standard structure across most oilfield Master Service Agreements
✓ Typically carves out exceptions for gross negligence and willful misconduct
Why This Matters on Multi-Contractor Sites
Heavy-haul deliveries, well hookups, and hotshot work often put JRH crews on-site alongside other contractors, the operator, and various vendors — all working the same location at the same time. Knock-for-knock indemnity is what allows that many parties to work safely on one site without every incident turning into a legal dispute.
Understanding the indemnity structure in an MSA — including carve-outs, insurance requirements, and what's excluded — matters before signing. This is general industry information, not legal advice; operators and contractors should review MSA terms with legal counsel.
JRH's Experience on Multi-Party Job Sites
For 30+ years, JRH Contracting has worked alongside other contractors on complex oilfield sites across Wyoming, Colorado, and Utah — understanding the insurance and risk allocation structure that keeps multi-party work moving safely.
Need a contractor experienced in multi-party job site coordination? Contact JRH Contracting.
📧 [email protected] | 📞 John: 435-828-7519
📧 [email protected] | 📞 Austin Hatch: 435-828-2957 or 435-828-7520
🌐 www.jrhcontracting.com

(knock for knock indemnity, oilfield MSA, master service agreement, indemnity clause, oilfield contractor insurance)

09/10/2026

Do You Need a Rescue Team for Confined Space Entry?
Yes — OSHA requires employers to have a rescue capability in place before anyone enters a permit-required confined space. It's not optional, and it's not something you arrange after someone gets in trouble.
What OSHA Actually Requires
Under 29 CFR 1910.146, employers must have rescue and emergency services available and evaluated for a space before entry begins:
✓ A rescue plan specific to the space being entered
✓ Trained personnel capable of performing rescue without becoming victims themselves
✓ Proper equipment — retrieval lines, harnesses, tripods, breathing apparatus — staged and ready
✓ Non-entry rescue capability whenever possible, so an attendant can retrieve someone without entering
✓ A means to notify rescue services immediately if self-rescue equipment fails
An attendant standing by with a phone number to call isn't a rescue plan. OSHA requires the capability to actually respond — fast enough to matter in an oxygen-deficient or toxic atmosphere.
Why "We'll Figure It Out If Something Happens" Fails
Confined space atmospheres can be lethal within seconds. If rescue isn't planned, staged, and trained before entry, there's no time to build one when an entrant goes down. This is exactly how the "would-be rescuer" pattern happens — someone reacts without a plan, without testing the air, and becomes the second casualty.
In-House Team or Contracted Rescue Service
Operators can meet this requirement by maintaining a trained internal rescue team, or by contracting a qualified rescue service for the entries they need. Either way, the capability has to be verified and in place before entry — not assembled in the moment.
JRH's Confined Space Rescue Standby Services
For 30+ years, JRH Contracting has provided trained, equipped confined space rescue standby across Wyoming, Colorado, and Utah — meeting OSHA requirements without operators having to build and maintain the capability in-house.
Need rescue standby for an upcoming confined space entry? Contact JRH Contracting.
📧 [email protected] | 📞 John: 435-828-7519
📧 [email protected] | 📞 Austin Hatch: 435-828-2957 or 435-828-7520
🌐 www.jrhcontracting.com

(confined space rescue requirements, OSHA 1910.146, rescue standby services, permit required confined space, confined space entry compliance)

09/04/2026

Pipeline Construction & Maintenance: Built for High Pressure, Maintained for Zero Downtime
Pipeline systems don't get a second chance to be built right. From installation and tie-ins to routine inspection and repair, JRH Contracting's midstream crews keep critical systems operating safely and on schedule.
Full-Cycle Pipeline Support
Our pipeline capabilities cover every stage of a system's life:
✓ Construction & Installation — Gathering lines, transmission systems, and facility connections built to code
✓ Tie-Ins — Connecting new infrastructure to existing systems without compromising integrity
✓ Routine Inspection — Identifying corrosion, wear, and potential failure points before they become problems
✓ Repair & Maintenance — Restoring compromised sections and keeping systems running reliably
Every stage is built around the same standard: pipelines that hold pressure, resist failure, and run for decades.
Why Built Right Matters
A pipeline is only as reliable as its weakest weld, its worst-prepped coating, or its most overlooked inspection. Quality construction and consistent maintenance are what separate systems that run for decades from ones that fail early — causing downtime, environmental risk, and costly emergency repairs.
JRH's Midstream Experience
For 30+ years, JRH Contracting has built and maintained the pipeline systems that move oil and gas reliably across Wyoming, Colorado, and Utah. Our crews bring the certified welding, inspection know-how, and field experience to keep critical infrastructure running safely — on schedule, every time.
Need pipeline construction, tie-ins, or maintenance support? Contact JRH Contracting.
📧 [email protected] | 📞 John: 435-828-7519
📧 [email protected] | 📞 Austin Hatch: 435-828-2957 or 435-828-7520
🌐 www.jrhcontracting.com

(pipeline construction, pipeline maintenance, pipeline tie-ins, midstream services, pipeline inspection and repair)

08/28/2026

What Is a Contract Pumper — And Why Do Operators Use One?
A contract pumper is a field professional hired to monitor and maintain producing wells on behalf of an operator — handling the daily tasks that keep a well running safely and efficiently without the operator staffing the role in-house.
What a Pumper Actually Does Day-to-Day
The job goes well beyond "checking on the well." A contract pumper typically handles:
✓ Daily well checks — pressures, tank levels, and equipment condition
✓ Adjusting equipment to keep production optimized
✓ Recording and reporting production data
✓ Identifying issues early — leaks, equipment wear, abnormal readings
✓ Coordinating with the operator when repairs or intervention are needed
✓ Maintaining regulatory and safety compliance at the site
A good pumper is often the first line of defense against costly downtime — catching small problems before they become expensive ones.
Why Operators Outsource This Role
Staffing a full-time pumper makes sense at scale. But for smaller operators, newer companies, or those managing a handful of wells across a wide area, hiring contract support is often the better move:
No overhead of a full-time employee — salary, benefits, equipment
Coverage across multiple wells or locations without adding headcount
Access to experienced personnel without a lengthy hiring process
Flexibility to scale up or down as well count changes
For operators focused on drilling and growth, contracting out daily field monitoring frees up time and resources for the parts of the business only they can manage.
JRH's Contract Pumping Services
For 30+ years, JRH Contracting has provided contract pumpers and flowback support across Wyoming, Colorado, and Utah — reliable field personnel who understand production operations and keep wells running.
Need dependable contract pumping support for your wells? Contact JRH Contracting.
📧 [email protected] | 📞 John: 435-828-7519
📧 [email protected] | 📞 Austin Hatch: 435-828-2957 or 435-828-7520
🌐 www.jrhcontracting.com

(contract pumper, lease operator, well monitoring services, production support, oilfield pumping services)

08/20/2026

What Certifications Should an Oilfield Welder Have?
Oilfield welders should hold certification under API 1104 — the industry standard for welding pipelines and related facilities carrying crude oil, natural gas, and petroleum products.
What API 1104 Certification Covers
API 1104 qualifies both the welding procedure and the individual welder for the specific pipe, position, and process used on the job:
✓ Welder qualification tested through guided bend and nick-break testing
✓ Procedure qualification (WPS) verified before production welding begins
✓ Position and progression-specific — a welder qualified downhill isn't automatically qualified uphill
✓ Radiographic (X-ray) or ultrasonic testing verifies weld quality on completed joints
✓ Re-qualification required to keep certification active and current
Why It's Not a One-Time Credential
Unlike a standard license, API 1104 qualification must be maintained. Welders are typically tested on-site at the start of a project — those who don't pass don't work. This keeps certification tied to actual, current skill rather than a test taken years earlier.
Other Certifications That Matter
Depending on the scope of work, oilfield welders may also need certification in structural welding (AWS D1.1) and qualification specific to carbon steel and stainless steel applications common in oilfield equipment and facilities.
JRH's Certified Welding Standards
For 30+ years, JRH Contracting has employed certified welders qualified in carbon and stainless steel, meeting API 1104 and project-specific requirements across Wyoming, Colorado, and Utah.
Need certified welding for your next project? Contact JRH Contracting.
📧 [email protected] | 📞 John: 435-828-7519
📧 [email protected] | 📞 Austin Hatch: 435-828-2957 or 435-828-7520
🌐 www.jrhcontracting.com

(oilfield welder certification, API 1104, pipeline welding certification, certified welder qualification, welding standards oil and gas)

Address

1945 East 1500
Vernal, UT
84078

Opening Hours

Monday	6am - 4pm
Tuesday	6am - 4pm
Wednesday	6am - 4pm
Thursday	6am - 4pm
Friday	6am - 4pm

Telephone

+14358282957

Website

https://www.jrhcontracting.com/

Alerts

Be the first to know and let us send you an email when JRH Contracting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Show All