Facilities List -
(1) 2000 Johnford SV-24 with Fanuc 18m-c C/N/C 3 Axis Controls0001 Repeatability, 1500 IPM Rapid Travel, 40 Taper Spindle with a 24 dual swing arm ATC, 24 inch X Axis travel, 20 inch Y Axis travel, 24 inch Z Axis travel with box ways, 15 HP- 8,000 RPM spindle motor
(1) 1998 Topwell Bed Mill with Anilam 1400 C/N/C 3 Axis Controls
.0001 Repeatability, 400 IPM Rapid Trave
l, 40 Taper Spindle with Power Drawbar,
39.50 inch X Axis travel, 21.25 inch Y Axis travel, 23 inch Z Axis travel with box ways , 10 HP-4500 RPM spindle motor has (4) 8 inch Kurt Vises to make multiple pieces
(1) 1990 Supermax YCM40 Knee Mill with Anilam Crusader-M C/N/C 3 Axis Controls0002 Repeatability, 200 IPM Rapid Travel, 30 Taper Spindle with Power Drawbar, 28 inch X Axis travel, 14 inch Y Axis travel, 5 inch Z Axis travel, has (3) 8 inch Kurt Vises to make multiple pieces
(1) 1990 Supermax YCM40 Knee Mill with Anilam Crusader-M C/N/C 3 Axis Controls0002 Repeatability, 200 IPM Rapid Travel, 40 Taper Spindle with Power Drawbar.28 inch X Axis travel, 14 inch Y Axis travel, 5 inch Z Axis travel, has (3) 8 inch Kurt Vises to make multiple pieces
(1) 1987 Supermax YCM16 Knee Mill with Anilam Crusader II C/N/C 3 Axis Controls0002 Repeatability, 200 IPM Rapid Travel, 30 Taper Spindle with Power Drawbar.28 inch X Axis travel, 14 inch Y Axis travel, 4 inch Z Axis travel, has (3) 8 inch Kurt Vises to make multiple pieces
(1) 1985 Millport Knee Mill with Anilam Crusader II C/N/C 3 Axis Controls0002 Repeatability, 200 IPM Rapid Travel, 30 Taper Spindle with Power Drawbar, 28 inch X Axis travel, 12 inch Y Axis travel, 4 inch Z Axis travel, has (2) 8 inch Kurt Vises to make multiple pieces
(1) Bridgeport Series 1 Knee Mill with Digital Readouts, .0002 Repeatability, 30 Taper Spindle with Power Drawbar, has (1) 6 inch Kurt Vise
CNC Lathes
(1) 2010 Ecoca MT-415/2000 lathe with Fanuc 0i-tc 2 Axis Control, 40 HP 2,500 RPM spindle motor with a 15 inch 3 jaw hydraulic chuck, 4.625 through bar capacity
12-station turret with 1 inch OD tooling, 2 inch ID tooling, .0001 repeatability. 1000 IPM rapid travel. Max turning diameter 20.1” in X travel and 78.35" in Z travel
(1) 2008 Feeler FTC 20 CNC Lathe with Fanuc 0i-tc 2 Axis Control, 25 HP 5,000 RPM spindle motor with an 8 inch 3 jaw hydraulic chuck, 2 inch through bar capacity
12-station turret with 1 inch OD tooling, 1.625 ID tooloing .0001 repeatability. 1000 IPM rapid travel. Max turning diameter 10.75” in X travel and 14.00” in Z travel
(1) 1991 Cincinnati Talon 208 CNC lathe with Acramatic 850x/TC Control, 25 HP 4,500 RPM spindle motor with an 8 inch 3 jaw hydraulic chuck, 2 inch through bar capacity
12-station turret with 1 inch OD tooling, 1.625 ID tooling .0001 repeatability. 900 IPM
rapid travel. Max turning diameter 10.25” in X travel and 23” in Z travel
Other Equipment
(1) 1995 Hansford Davis Keyseater with automatic feed and stop, accurate micrometer depth stop. Broaches that we have in house at this time are: 1/8, .130, .147, 5/32, 3/16, 1/4, .261, 5/16, .360, 3/8, ½, 5/8, ¾, 7/8, 1 inch, 1.256. for Metric broaches that we have are: .315, 10mm, 12mm, 14mm,16mm, 18mm, 20mm, 22mm, 28mm, 32mm
(1) Stiegar 6x18 Manual Surface Grinder
(1) Dake Mep Automatic Cold Saw +/- .003 Repeatability on lengths and 125 finish
(1) Grob Vertical Band saw 19 inch Throat
(1) Kalamazoo Horizontal Band Saw 9x13-1/2 inch Capacity
(1) Skat Blast Sandblaster with 40 inch Cabinet
Support Equipment
(1) 6,000 Lbs Fork lift
(1) 6 inch Bench Grinder
(4) Dyna Files
(1) 3 inch wide Belt Sander
(4) Cordless Drills
(3) Tapping Heads; Holding capacity from #4 Tap to ¾ inch Tap
• A large quantity of 40 and 30 taper tool holders and collets
• A wide variety of end mills, reamers, and drill bits
