HM Manufacturing

HM Manufacturing HM Manufacturing is a leading manufacturer that specializes in producing custom cutting edge power transmission components.

HM Manufacturing specializes in producing U.S. made synchronous drive products that include gears, timing belt pulleys, splines, shafts, chain sprockets, sheaves and related parts for power transmission and precision mechanical components industry.

Last week, we proudly celebrated 47 years of HM Manufacturing! šŸŽ‰For nearly five decades, HM Manufacturing has continued ...
06/01/2026

Last week, we proudly celebrated 47 years of HM Manufacturing! šŸŽ‰

For nearly five decades, HM Manufacturing has continued to grow, evolve, and deliver quality custom manufacturing solutions. What started as Homemade Manufacturing 47 years ago has grown through hard work, strong partnerships, and a commitment to quality every step of the way.

We are incredibly grateful for our dedicated employees, loyal customers, and trusted suppliers who have supported us throughout the years. Your trust, hard work, and partnership have played a major role in shaping HM Manufacturing into what it is today.

As we celebrate this milestone, we look forward to continued growth, innovation, and many more years ahead. Thank you for being part of our journey — we truly couldn’t do it without you.

Cheers to 47 years of HM Manufacturing and the exciting future ahead! šŸ’™āš™ļø

From all of us at HM Manufacturing, we remember and honor the courageous service members who made the ultimate sacrifice...
05/25/2026

From all of us at HM Manufacturing, we remember and honor the courageous service members who made the ultimate sacrifice. Wishing everyone, including our HM team, customers and suppliers, a meaningful and safe Memorial Day as we reflect with gratitude. šŸ‡ŗšŸ‡ø

Not all spline shafts are created equal. āš™ļøThese custom spline shafts required a combination of precision machining, hea...
05/12/2026

Not all spline shafts are created equal. āš™ļø

These custom spline shafts required a combination of precision machining, heat treating, and finish grinding to achieve tight tolerances and repeatable performance. After heat treat, the shafts were precision ground to hold a tolerance within a tenth, while maintaining critical geometry across multiple features.

Additional processes included:
āœ”ļø Precision ground bearing surfaces
āœ”ļø Threaded features
āœ”ļø External splines
āœ”ļø Plunge EDM hex in the bore for internal drive geometry

Projects like this are where process control and attention to detail make all the difference, especially when heat treat movement, concentricity, and final fit all have to work together.

From machining to finishing, this is the kind of precision manufacturing our team takes pride in every day.

Have a custom project? Contact us!

Not your average shaft and not your average process. āš™ļøThis custom shaft was machined from ETD 150 and built for a deman...
05/05/2026

Not your average shaft and not your average process. āš™ļø

This custom shaft was machined from ETD 150 and built for a demanding application. Between the tight tolerances, a custom spline , and the long keyway with additional keyway features, this part required a lot of planning and precision from start to finish.

Harder material and tighter specs always bring challenges, but that’s where our team does its best work—figuring it out, dialing it in, and getting it done right.

If you’ve got a complex component that needs a custom approach, we’re always up for it.
Check us out at www.hmmanufacturing.com or reach out to connect.

Not every career path starts with experience—some start with curiosity.Alex joined HM Manufacturing in 2018 right out of...
04/30/2026

Not every career path starts with experience—some start with curiosity.

Alex joined HM Manufacturing in 2018 right out of high school after developing an interest in manufacturing early on. What began as curiosity—sparked by seeing complex components like planetary gears—has grown into a role supporting CAD, Quality, and Engineering.

Today, Alex helps turn prints into finished parts used in demanding, real-world applications. His growth reflects what’s possible with consistency, a willingness to learn, and taking on new challenges over time.

We’re proud to have Alex apart of the HM team!

Precision where it connects. This straight edge spline, machined from 6061 aluminum, is designed for clean engagement in...
04/28/2026

Precision where it connects. This straight edge spline, machined from 6061 aluminum, is designed for clean engagement in motor and pump couplings—keeping everything aligned, efficient, and reliable.

While it may look simple, every feature has a purpose. This one even serves as an assembly tool for a custom shaft, proving that even the supporting pieces play a critical role in the bigger picture.

Finished with a final tapped feature to complete the job.

Have a project like this? Contact us at [email protected] or visit www.hmmanufacturing.com

Precision matters where it counts. These aluminum pulleys are machined with tight tolerances on critical features, ±.000...
04/07/2026

Precision matters where it counts. These aluminum pulleys are machined with tight tolerances on critical features, ±.0005ā€ on the bore, to keep high-performance food & beverage equipment running smooth, consistent, and reliable—cycle after cycle.

Built for performance. Made to last.

Have a project like this? Contact us at [email protected] or for more information visit our website www.hmmanufacturing.com

̇ni̇ng

Powered by Easter candy…and hunting down perfection, one part at a time šŸ£āš™ļø. Wishing all of our amazing customers and ve...
04/02/2026

Powered by Easter candy…and hunting down perfection, one part at a time šŸ£āš™ļø. Wishing all of our amazing customers and vendors a Happy Easter from the HM Manufacturing team. Thank you for being part of what makes our work meaningful every day.

Not all timing belt pulleys are created equal.This 72-tooth SupertorxĀ® pulley (8 mm pitch) isn’t a profile you see every...
03/31/2026

Not all timing belt pulleys are created equal.

This 72-tooth SupertorxĀ® pulley (8 mm pitch) isn’t a profile you see every day, but it’s one we’re always ready to produce when customers need performance beyond standard geometries.

šŸ”¹ Aluminum construction
šŸ”¹ Precision machined oblong mounting slots for fine adjustment
šŸ”¹ Sulfuric anodize with seal coat for wear resistance
šŸ”¹ ~6ā€ diameter Ɨ 3.25ā€ length
šŸ”¹ Tight runout and balance requirements

At HM Manufacturing, whether it’s common profiles or the ones you only see once in a while, the expectation stays the same: precision, repeatability, and performance.

For more information DM us or visit our website šŸ‘‡www.hmmanufacturing.com

Manufacturing CNC engineering

Looks simple.Isn’t.Tight concentricity. Clean tooth geometry. Critical fits. Every edge of this component has a job to d...
03/24/2026

Looks simple.
Isn’t.

Tight concentricity. Clean tooth geometry. Critical fits. Every edge of this component has a job to do.

Precision isn’t a feature. It’s the standard.

For more information on our capabilities, DM us or check out our website šŸ‘‰ www.hmmanufacturing.com

Address

1200 Henri Drive
Wauconda, IL
60084

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Alerts

Be the first to know and let us send you an email when HM Manufacturing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to HM Manufacturing:

Share