Ortega’s Garage

Directions

Ortega’s Garage Specializing in high performance engine work, 12V electrical, and race car plumbing! 🇺🇸

https://youtube.com/?si=-r6OLOrCA1nFq-ML

10/22/2026

Introducing our latest & greatest of the Ford Godzilla platform “BAMF”.🔥 7.3 liters of daily driver madness rated to handle over 4-digit power all day long; E85 at the track (or date night 😝) & back to work Monday morning on pump gas tame as a cat. Ford Performance “R” block, fully forged rotating assembly, custom Diamond pistons, custom spec’d valve-train topped with a 3.0L all blueprinted & assembled here in house. This combination should make some very good, reliable power and look good doing it as well in its coat of Lamborghini orange; check it out! 🍊

Send us a DM if you’re interested in getting a drivetrain going for your project; from short blocks to turn-key no guesswork packages! We look forward to discussing with you! 📲

Couple more shots of our daily driver +600hp N/A Ford Godzilla turn-key package. We have another one of these bad boys u...
08/21/2026

Couple more shots of our daily driver +600hp N/A Ford Godzilla turn-key package. We have another one of these bad boys undergoing assembly as we speak! Get ahold of us TODAY to custom spec it for YOUR application! Custom ground cam, CNC ported heads, intake manifold, oil pan, accessory drive, custom paint job, you name it! 🔥 All turn-key packages come TURN KEY including all wiring, sensors, front accessories, DBW throttle body and a Holley ECU base calibrated on our engine run stand straight to your door; no guess work. Send us a DM/email we’ll be happy to get you squared away! 📲

07/31/2026

Turn-key +600hp 7.3L Godzilla out the door! 🔥 Super tame daily driver with a nasty punch of torque on demand beneath your right foot! We included a new Holley Terminator X Max engine management system and a complete OEM front accessory drive for a true, no guess work, turn the key & GO package. This customer & his 70’s F100 are in for a whole lot of reliable, year round fun; off to Montana it goes! 🚚📦

Mild gen IV LS motor just about buttoned up ready to make some noise on the run stand. We did a thorough go-over on the ...
07/17/2026

Mild gen IV LS motor just about buttoned up ready to make some noise on the run stand. We did a thorough go-over on the entire engine along with a bunch of final assembly. This will be going in a mild streetcar setup so we went with a mid-mount ICT billet accessory drive and will be independently managed through a Holley ECU. 🔥

05/16/2026

Quick rundown on our customers F150 before it heads home! 🏠 We’ve been on a time crunch these past few weeks getting this truck partially rewired, plumbed, and running so it can head off to paint! Check out the rundown and stay tuned for when we get it back in here from paint to run it across the finish line! 🔥

YouTube - Ortega’s Garage

Another 80’s F150 just about wrapped up! ⚡️ Customer had a ton of new school creature comforts in mind to go with his ne...
05/07/2026

Another 80’s F150 just about wrapped up! ⚡️ Customer had a ton of new school creature comforts in mind to go with his new drivetrain so we started with a new engine wiring harness with a cab “standalone” harness following up to a new isolated power distribution center & digital dash. Serviceability was also key since this truck is off to paint right after so we opted for lots of quick “plug’n play” junctions. We achieved that by using a series of Deutsch bulkhead connectors along with a 21-pin main bulkhead connector for the engine loom. This truck is now equipped with a modern digital dash, ignition, fuel & cooling package all fully automated controlled through factory switches; and of course we left her ready for some A/C too! ⚡️🔌

YouTube - Ortega’s Garage

Address

Yuma, AZ

Website

Alerts

Be the first to know and let us send you an email when Ortega’s Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share