Belzona Việt Nam

04/05/2026

For more info refer to: ctmarkvn.com/belzona-uk




-Metal

Belzona 1121 (Super XL-Metal)
Manufacturer: Belzona
A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material has been developed to offer an extended working life, ideal for large applications where greater volumes of material are required or to provide adequate working time at higher temperatures. Belzona 1121 (Super XL-Metal) will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
Key benefits:
* Multi-purpose durable repair composite with extended working life
* Fully machinable using conventional tools
* Application and cure at room temperature - no hot work involved
* Simple mixing ratio
* Reduced health and safety risks as it is solvent-free
* No shrinkage, expansion or distortion
* Excellent adhesion to metals including stainless steel, carbon steel, aluminium, brass and copper
* Will adhere to many other natural and synthetic materials including glass and wood
* Outstanding corrosion resistance
* Excellent chemical resistance against a wide range of chemicals
* Excellent electrical insulation characteristics
Applications for Belzona 1121 (Super XL-Metal) include:
* Resurface of large pitted metal surfaces
* Repair of damaged shafts and hydraulic rams
* In-situ fl**ge repair
* High strength structural adhesive for metal bonding
* Creation of irregular load bearing shims and reforming of bearing housings

For more info refer to: ctmarkvn.com/belzona-uk




-Metal

04/05/2026

Belzona 1121 (Super XL-Metal)
Manufacturer: Belzona
A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material has been developed to offer an extended working life, ideal for large applications where greater volumes of material are required or to provide adequate working time at higher temperatures. Belzona 1121 (Super XL-Metal) will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
Key benefits:
* Multi-purpose durable repair composite with extended working life
* Fully machinable using conventional tools
* Application and cure at room temperature - no hot work involved
* Simple mixing ratio
* Reduced health and safety risks as it is solvent-free
* No shrinkage, expansion or distortion
* Excellent adhesion to metals including stainless steel, carbon steel, aluminium, brass and copper
* Will adhere to many other natural and synthetic materials including glass and wood
* Outstanding corrosion resistance
* Excellent chemical resistance against a wide range of chemicals
* Excellent electrical insulation characteristics
Applications for Belzona 1121 (Super XL-Metal) include:
* Resurface of large pitted metal surfaces
* Repair of damaged shafts and hydraulic rams
* In-situ fl**ge repair
* High strength structural adhesive for metal bonding
* Creation of irregular load bearing shims and reforming of bearing housings

For more info refer to: ctmarkvn.com/belzona-uk




-Metal

28/04/2026

For more info refer to: ctmarkvn.com/belzona-uk

Belzona 1811 (Ceramic Carbide)
A 2-part epoxy-based composite material incorporating abrasion resistant ceramic aggregates for the repair and protection of metal surfaces suffering from sliding abrasion. Belzona 1811 (Ceramic Carbide) resists deformation damage and wear providing long-term abrasion resistance.
This highly durable composite material can be applied without the need for specialist tools to unlimited thickness onto vertical and horizontal surfaces up to a dry temperature of 150°C (300°F). Belzona 1811 (Ceramic Carbide) will not corrode and is resistant to a wide range of chemicals. It will bond to a variety of substrates providing a seamless lining coupled with excellent abrasion and wear resistance to coarse materials.
Alternatively, where problems due to very fine particle abrasion occur, Belzona 1812 (Ceramic Carbide FP) has been developed.
Key benefits:
* High abrasion and wear resistance
* Will not corrode
* Solvent-free allowing it to be applied safely in confined areas
* Excellent bonding to many metal surfaces including steel and cast iron
* Application and cure at room temperature - no hot work involved
* Long working life
* Fast cure rate ensures prompt return to service
* High mechanical strength
Applications for Belzona 1811 (Ceramic Carbide) include:
* Protection of pipework, pipe bends, elbows and valves from abrasion
* Bonding and grouting tiles and wear plates where high abrasion resistance is required
* Repair of screw conveyors, centrifuges and pump impellers damaged by erosion and corrosion
* Linings for worn hoppers, chutes, mixer blades and other equipment subject to abrasion

For more info refer to: ctmarkvn.com/belzona-uk

28/04/2026

Belzona 1811 (Ceramic Carbide)
A 2-part epoxy-based composite material incorporating abrasion resistant ceramic aggregates for the repair and protection of metal surfaces suffering from sliding abrasion. Belzona 1811 (Ceramic Carbide) resists deformation damage and wear providing long-term abrasion resistance.
This highly durable composite material can be applied without the need for specialist tools to unlimited thickness onto vertical and horizontal surfaces up to a dry temperature of 150°C (300°F). Belzona 1811 (Ceramic Carbide) will not corrode and is resistant to a wide range of chemicals. It will bond to a variety of substrates providing a seamless lining coupled with excellent abrasion and wear resistance to coarse materials.
Alternatively, where problems due to very fine particle abrasion occur, Belzona 1812 (Ceramic Carbide FP) has been developed.
Key benefits:
* High abrasion and wear resistance
* Will not corrode
* Solvent-free allowing it to be applied safely in confined areas
* Excellent bonding to many metal surfaces including steel and cast iron
* Application and cure at room temperature - no hot work involved
* Long working life
* Fast cure rate ensures prompt return to service
* High mechanical strength
Applications for Belzona 1811 (Ceramic Carbide) include:
* Protection of pipework, pipe bends, elbows and valves from abrasion
* Bonding and grouting tiles and wear plates where high abrasion resistance is required
* Repair of screw conveyors, centrifuges and pump impellers damaged by erosion and corrosion
* Linings for worn hoppers, chutes, mixer blades and other equipment subject to abrasion

For more info refer to: ctmarkvn.com/belzona-uk

20/04/2026

For more info refer to: ctmarkvn.com/belzona-uk

Belzona 1391T
Manufacturer: Belzona
Belzona 1391T is a 2-part ceramic filled epoxy coating which provides erosion and corrosion resistance to high temperature equipment operating under immersion up to 120°C (248°F). It offers excellent resistance to a wide range of aqueous solutions, hydrocarbons and process chemicals.
This 2-coat, solvent-free system is applied using simple hand tools to areas requiring maximum erosion resistance. It has a long overcoat window and can be rapidly force cured allowing applications to be effectively completed with minimal downtime, shortening application time and simplifying maintenance procedures.
For situations where a sprayable coating is required, Belzona Belzona 1391S is ideal.
Key benefits:
* Operates at high temperature under immersed conditions
* Excellent erosion and corrosion resistance
* Reduced health and safety risks as it is solvent-free
* Good electrical insulation properties
* High compressive strength
* Application and cure at room temperature - no hot work involved
* Excellent chemical resistance against a wide range of chemicals
* No shrinkage, expansion or distortion
* Excellent bonding to many metal surfaces including steel, stainless steel, specialist steels
* Suitable for steaming out up to 210°C (410°F)
Applications for Belzona 1391T include:
* High temperature coatings for process vessels, distillation columns, heat exchangers, clarifiers and scrubber units operating under immersion
* Protecting pumps, valves, hot water tanks and separators from the effects of erosion and corrosion
* High strength structural adhesive for metal bonding
Creation of irregular load bearing shims

For more info refer to: ctmarkvn.com/belzona-uk

20/04/2026

Belzona 1391T
Manufacturer: Belzona
Belzona 1391T is a 2-part ceramic filled epoxy coating which provides erosion and corrosion resistance to high temperature equipment operating under immersion up to 120°C (248°F). It offers excellent resistance to a wide range of aqueous solutions, hydrocarbons and process chemicals.
This 2-coat, solvent-free system is applied using simple hand tools to areas requiring maximum erosion resistance. It has a long overcoat window and can be rapidly force cured allowing applications to be effectively completed with minimal downtime, shortening application time and simplifying maintenance procedures.
For situations where a sprayable coating is required, Belzona Belzona 1391S is ideal.
Key benefits:
* Operates at high temperature under immersed conditions
* Excellent erosion and corrosion resistance
* Reduced health and safety risks as it is solvent-free
* Good electrical insulation properties
* High compressive strength
* Application and cure at room temperature - no hot work involved
* Excellent chemical resistance against a wide range of chemicals
* No shrinkage, expansion or distortion
* Excellent bonding to many metal surfaces including steel, stainless steel, specialist steels
* Suitable for steaming out up to 210°C (410°F)
Applications for Belzona 1391T include:
* High temperature coatings for process vessels, distillation columns, heat exchangers, clarifiers and scrubber units operating under immersion
* Protecting pumps, valves, hot water tanks and separators from the effects of erosion and corrosion
* High strength structural adhesive for metal bonding
Creation of irregular load bearing shims

For more info refer to: ctmarkvn.com/belzona-uk

13/04/2026

For more info refer to: ctmarkvn.com/belzona-uk





-Metal)

Belzona 1321 (Ceramic S-Metal)
Manufacturer: Belzona
A 2-part ceramic filled epoxy coating designed to provide erosion and corrosion resistance of metal surfaces. This solvent-free epoxy coating has outstanding chemical resistance and will bond to almost any rigid surface. Due to its high compressive strength it can be also used to create a perfect shim. This material is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work.
Key Benefits:
* Long-term erosion and corrosion protection
* Excellent bonding to almost any rigid surface including steel, aluminium, copper, brass and glass reinforced plastics
* High compressive strength
* Excellent chemical resistance against a wide range of chemicals
* Reduced health and safety risks as it is solvent-free
* No shrinkage, expansion or distortion
* Application and cure at room temperature - no hot work involved
* Long working life
* Simple mixing ratio
Applications for Belzona 1321 (Ceramic S-Metal) include:
* Internal coating for centrifugal and positive displacement pumps
* Long-term erosion and corrosion resistance for heat exchangers, water boxes and tube sheets
* Protection of butterfly and gate valves, fans and kort nozzles from erosion, corrosion and cavitation
* Impingement protection of pipe elbows
* High strength structural adhesive for metal bonding
* Creation of irregular load bearing shims

For more info refer to: ctmarkvn.com/belzona-uk





-Metal)

13/04/2026

Belzona 1321 (Ceramic S-Metal)
Manufacturer: Belzona
A 2-part ceramic filled epoxy coating designed to provide erosion and corrosion resistance of metal surfaces. This solvent-free epoxy coating has outstanding chemical resistance and will bond to almost any rigid surface. Due to its high compressive strength it can be also used to create a perfect shim. This material is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work.
Key Benefits:
* Long-term erosion and corrosion protection
* Excellent bonding to almost any rigid surface including steel, aluminium, copper, brass and glass reinforced plastics
* High compressive strength
* Excellent chemical resistance against a wide range of chemicals
* Reduced health and safety risks as it is solvent-free
* No shrinkage, expansion or distortion
* Application and cure at room temperature - no hot work involved
* Long working life
* Simple mixing ratio
Applications for Belzona 1321 (Ceramic S-Metal) include:
* Internal coating for centrifugal and positive displacement pumps
* Long-term erosion and corrosion resistance for heat exchangers, water boxes and tube sheets
* Protection of butterfly and gate valves, fans and kort nozzles from erosion, corrosion and cavitation
* Impingement protection of pipe elbows
* High strength structural adhesive for metal bonding
* Creation of irregular load bearing shims

For more info refer to: ctmarkvn.com/belzona-uk





-Metal)

06/04/2026

For more info refer to: ctmarkvn.com/belzona-uk

Belzona 1341 (Supermetalglide)
Manufctcurer: Belzona
A 2-part epoxy coating designed to improve efficiency of pumps, pipes, valves and other fluid handling equipment while protecting them from the effects of erosion and corrosion. This high performance product is proven to reduce energy consumption, provide excellent chemical resistance and lower maintenance costs.
Belzona 1341 (Supermetalglide) improves pump efficiency by using hydrophobic technology to repel process fluids and reduce turbulent flow. Efficiency increases of up to 7% have been recorded on new equipment and up to 20% on refurbished equipment.
Key benefits:
* Improved efficiency of pumps, pipes, valves and other equipment
* Long-term erosion and corrosion protection
* Excellent chemical resistance against a wide range of chemicals
* Suitable for contact with potable water
* Reduced health and safety risks as it is solvent-free
* Application and cure at room temperature - no hot work involved
* Long working life
* Excellent bonding to metals including stainless steel, duplex steels, carbon steel, aluminium, cast iron and bronze as well as specialist alloys and other materials
Applications for Belzona 1341 (Supermetalglide) include:
* Enhancing performance of centrifugal pumps and positive displacement pumps
* Protecting pump volutes and impellers from erosion and corrosion
* Internal pipe coatings to increase fluid flow
* Long-term corrosion protection of tube sheets heat exchangers, water boxes and water tanks
* Reducing material hang-up in chutes and hoppers
* Erosion resistant coating for leading edge protection on wind turbine blades.
Belzona 1341 (Supermetalglide) is suitable for contact with potable water as it is certified to NSF/ANSI Standard 61 and satisfies the UK Drinking Water Inspectorate requirements.

For more info refer to: ctmarkvn.com/belzona-uk