Abrasive Flow Solutions

Name: Abrasive Flow Solutions
Address: 12 Antwerp Street Apex, Benoni, 1540, ZA
Telephone: +27119551119

Home
South Africa
Benoni
Abrasive Flow Solutions

Designed for diverse industries including mining, chemical and petrochemical, water and wastewater and energy production

29/05/2026

O-PORT SLURRY GATE VALVE

AFS’s O-Port Slurry Gate Valve has a Stainless Steel gate machined with a round or***ce port, in line with seat ID when the valve is in the open position. When the valve is closed the ported gate will move downwards sealing the port.
Due to the seal being constantly engaged against the gate, stroking the valve closed forces the gate progressively between the two matching sleeve ends until it reaches the fully closed position - at which point the sleeves each butt up tightly against either side of the gate, effectively sealing and completely containing the line pressure. Build up of material to prevent full gate travel is eliminated as there are no areas for such material to accumulate. Any material discharged between the sleeves during stroking open or closed is collected within the containment area of the valve body and drained via the multiple flushing ports in the body. The O-Port Slurry Valve can be used as a man-safe line blanking valve.

For inquiries, feel free to contact us.
📞 +27 11 955 1119
📱 +27 76 463 3846
📧 [email protected]
🌐 abrasiveflowsolutions.com

-Port

28/05/2026

WAFER LUG KNIFE GATE VALVE

The FPV Wafer Lug Knife Gate Valve is designed as a space saving option for corrosive applications. The resilient seat is an elastomer sleeve, available in different materials. The sleeve supports and guides the gate and guarantees full tightness when closed. The valve can be used in either bi-directional or dead end service.

For inquiries, feel free to contact us.
📞 +27 11 955 1119
📱 +27 76 463 3846
📧 [email protected]
🌐 abrasiveflowsolutions.com

27/05/2026

DON’T REPLACE IT, REFURBISH IT

When heavy-duty valves face extreme wear, slurry abrasion, and corrosion, buying new isn’t your only option and it certainly isn’t the fastest. High replacement costs and long lead times can stall your operations and hurt your bottom line.

At Abrasive Flow Solutions (AFS), we breathe new life into your worn, rusted, and decommissioned valves, restoring them from "scrap-heap ready" to OEM-specification performance.

Why Choose AFS Valve Refurbishment?Minimise Downtime: Don't wait weeks or months for new imports. We offer fast turnaround times to keep your plant or mine operating smoothly.

Drastic Cost Savings: Refurbishing costs a fraction of a total replacement, maximising the lifecycle of your existing infrastructure.

OEM Quality Workmanship: We don’t just patch things up. Every valve undergoes a rigorous stripping, cleaning, rebuilding, and testing process to ensure it handles your toughest processing environments.

Brand Expertise: From standard diaphragm and wedge gate valves to specialised slurry and pinch valves, we have the engineering capabilities to restore them to pristine condition.

Optimise your plant availability without breaking the budget.
Reduce your overheads. Speed up your turnaround. Partner with AFS.

For inquiries, feel free to contact us.
📞 +27 11 955 1119
📱 +27 76 463 3846
📧 [email protected]
🌐 abrasiveflowsolutions.com

22/05/2026

FLANGED SLURRY KNIFE GATE VALVE

The FPV Flanged Slurry Knife Gate Valve is a true bi-directional gate valve. The rubber sleeves are designed to withstand the harsh abrasive duty within the mining and milling industry. Isolation is provided by the gate passing through the sleeves in such a manner that any solids that could potentially clog or jam the blade are pushed out to the atmosphere thorough the bottom of valve housing.

For inquiries, feel free to contact us.
📞 +27 11 955 1119
📱 +27 76 463 3846
📧 [email protected]
🌐 abrasiveflowsolutions.com

21/05/2026

HIGH-PRESSURE SLURRY KNIFE GATE VALVE

The FPV High-Pressure Slurry Knife Gate Valve is a true bi-directional slurry knife gate valve. Its rubber sleeves are designed to seal and withstand the harsh abrasive duty inherent in mining and milling facilities. Isolation is provided by the gate passing through the sleeve in such a manner that any solids that could potentially clog or jam the blade are pushed out into the atmosphere thorough the bottom of valve housing.

For inquiries, feel free to contact us.
📞 +27 11 955 1119
📱 +27 76 463 3846
📧 [email protected]
🌐 abrasiveflowsolutions.com

20/05/2026

LINED SLURRY KNIFE GATE VALVE

The FPV Lined Slurry Knife Gate Valve is designed for full on/off abrasive and corrosive applications. The Urethane or Rubber lining is moulded throughout the body and chest area. The lining is flush with the bottom of the valve eliminating any pocket where material can collect.

For inquiries, feel free to contact us.
📞 +27 11 955 1119
📱 +27 76 463 3846
📧 [email protected]
🌐 abrasiveflowsolutions.com

19/05/2026

WAFER SLURRY KNIFE GATE VALVE

The FPV Wafer Slurry Knife Gate Valve has been designed as a space saving option for slurry applications. The full port design allows the gate to be fully isolated by the sleeves in the option position. When the valve is closed the gate pushes between the sleeves ensuring 100% bi-directional bubble tight seal and zero downstream leakage.

For inquiries, feel free to contact us.
📞 +27 11 955 1119
📱 +27 76 463 3846
📧 [email protected]
🌐 abrasiveflowsolutions.com

10/05/2026

HAPPY MOTHER’S DAY

From our AFS family to yours, wishing a very Happy Mother’s Day to all the superhero moms out there!

Thank you for your endless love and for ensuring the "flow" of life always stays on track. Enjoy your special day!

01/05/2026

WORKER’S DAY

Behind every successful project, every durable valve, and every ton of earth moved is the dedication of a skilled workforce. Today, we pause to honor the hard work, precision, and resilience of the people who keep our industries running and our economy growing. Happy Workers’ Day to the backbone of our nation! 🛠️🇿🇦

29/04/2026

WAFER BUTTERFLY VALVES

Wafer butterfly valves are compact, lightweight, and cost-effective quarter-turn flow control devices designed to fit between two pipeline flanges, held in place by studs or bolts. Ideal for low-pressure, compact spaces, they provide tight, bidirectional sealing with features like EPDM linings, stainless steel or ductile iron discs, and manual or actuated options.

For inquiries, feel free to contact us.
📞 +27 11 955 1119
📱 +27 76 463 3846
📧 [email protected]
🌐 abrasiveflowsolutions.com

Address

12 Antwerp Street Apex
Benoni
1540

Telephone

+27119551119

Website

http://abrasiveflowsolutions.com/contact-us/

Alerts

Be the first to know and let us send you an email when Abrasive Flow Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Abrasive Flow Solutions:

Shortcuts

Want your business to be the top-listed Engineering Company in Benoni?