Quality Inspection & Engineering Services

Directions Website Contact the business

Quality Inspection & Engineering Services Providing the highest level of inspection services, non-destructive testing, vendor pre-shipping ins

Before equipment leaves the supplier, what needs to be checked?Vendor inspection helps verify equipment against agreed p...
07/10/2026

Before equipment leaves the supplier, what needs to be checked?

Vendor inspection helps verify equipment against agreed project requirements before it reaches site.

A clear inspection scope should establish:

• What requirements the equipment must meet.
• When inspection or witnessing is needed.
• What checks and records are required before shipment.

Planning these checks early creates an opportunity to address discrepancies before delivery.

Contact QIES to discuss your vendor inspection and QA/QC requirements.

Magnetic Particle Inspection in action in Matola, Mozambique.Our Mozambique partner is conducting MPI on a storage tank....
22/09/2026

Magnetic Particle Inspection in action in Matola, Mozambique.

Our Mozambique partner is conducting MPI on a storage tank. This non-destructive testing method helps identify surface and near-surface discontinuities in ferromagnetic materials without damaging the component being inspected.

Practical field ex*****on supporting asset integrity.

Contact QIES to discuss your inspection requirements.

QIES is now registered in Namibia.This is another important step in the growth of our African footprint and strengthens ...
10/09/2026

QIES is now registered in Namibia.

This is another important step in the growth of our African footprint and strengthens our regional presence alongside South Africa, Mozambique and Nigeria.

As QIES continues to expand, our focus remains on providing credible inspection, engineering and asset integrity support to the industries and projects that keep Africa moving.

Inspection. Integrity. Engineering Excellence.

On-site radiography at Total Alrode Depot.QIES continues to support clients with specialised inspection capability in th...
26/08/2026

On-site radiography at Total Alrode Depot.

QIES continues to support clients with specialised inspection capability in the field, combining the right equipment, qualified personnel and disciplined ex*****on.

Radiographic testing remains an important tool for verifying weld and component integrity in industrial environments where reliable inspection matters.

Inspection. Integrity. Engineering Excellence.

The best time to find a problem is before the next stage begins.Inspection hold points allow important requirements to b...
17/08/2026

The best time to find a problem is before the next stage begins.

Inspection hold points allow important requirements to be checked before fabrication progresses.

Depending on the project, these checks may take place around material verification, fit-up, welding, NDT, dimensions or coating. The objective is not simply to find problems. It is to verify that critical work has been completed correctly before the next stage begins.

Good inspection supports better quality control, reduces avoidable rework and strengthens confidence throughout the fabrication process.

Inspection. Integrity. Engineering Excellence.

Some inspections require seeing what can't be seen from the outside.Borescope inspection allows our team to examine the ...
30/07/2026

Some inspections require seeing what can't be seen from the outside.

Borescope inspection allows our team to examine the internal condition of pipelines and other difficult-to-access areas without unnecessary disruption, providing accurate information to support maintenance and asset integrity decisions.

At QIES, every inspection is carried out with the same commitment to technical excellence, verification and quality.

Inspection. Integrity. Engineering Excellence.

A qualified welder is only one part of a controlled welding process.WPS, PQR and WPQ each serve a different purpose:- WP...
16/07/2026

A qualified welder is only one part of a controlled welding process.

WPS, PQR and WPQ each serve a different purpose:

- WPS defines how the weld must be produced.
- PQR demonstrates that the procedure can produce an acceptable weld.
- WPQ confirms that the welder is qualified to perform the required process.

These controls work together to support welding consistency, compliance and technical accountability. They are connected, but they are not interchangeable.

Welding quality depends on qualified procedures, competent personnel and disciplined ex*****on.

QIES is looking for experienced inspectors and technicians for upcoming projects in Durban, Johannesburg, Cape Town, Por...
14/07/2026

QIES is looking for experienced inspectors and technicians for upcoming projects in Durban, Johannesburg, Cape Town, Port Elizabeth and East London.

We are recruiting:

• E&I Vendor Inspectors
• Mechanical Vendor Inspectors
• Level 2 Welding Inspectors
• Coating Inspectors
• NDT Technicians
• PWHT Technicians
• IPE Inspectors
• CP Inspectors

Candidates must be qualified in the relevant discipline and have at least five years' experience.

Please send your CV and certificates to [email protected] before 31 July 2026.

One thickness reading gives you a number. A corrosion map gives you a pattern.Corrosion does not always develop evenly, ...
03/07/2026

One thickness reading gives you a number. A corrosion map gives you a pattern.

Corrosion does not always develop evenly, which means a single wall thickness reading may not show the full condition of an asset. Corrosion mapping uses structured ultrasonic measurements across a defined area to help identify localised thinning, reveal wall-loss patterns and highlight areas that may need closer attention.

This gives asset owners better information to support maintenance planning and informed asset integrity decisions.

At QIES, inspection is not based on assumption. It is based on verification.

A finding only adds value when it is documented properly.Inspection is not complete without clear, traceable reporting.G...
24/06/2026

A finding only adds value when it is documented properly.

Inspection is not complete without clear, traceable reporting.

Good documentation supports compliance, accountability and better decision-making long after the inspection is done.

At QIES, reporting is part of the standard, not an afterthought.

Address

Durban
4001

Opening Hours

Monday 08:00 - 16:00
Tuesday 08:00 - 16:00
Wednesday 08:00 - 16:00
Thursday 08:00 - 16:00
Friday 08:00 - 16:00

Website

Alerts

Be the first to know and let us send you an email when Quality Inspection & Engineering Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Quality Inspection & Engineering Services:

Shortcuts

Share

Category