Concrete Worm

Concrete Worm Concrete Worm was established in 1996 and is the leading Core Drilling and Saw Cutting contractor in the Western Cape.

Concrete Worm is proud to have contributed to the demolition of the old PPC silo in Montague Gardens. The tower, which h...
12/04/2026

Concrete Worm is proud to have contributed to the demolition of the old PPC silo in Montague Gardens.
The tower, which has stood there for decades, is making way for a new factory development.

Precision cutting in a high-pressure environment ....Concrete Worm recently completed a complex concrete cutting project...
13/08/2025

Precision cutting in a high-pressure environment ....
Concrete Worm recently completed a complex concrete cutting project inside a fully operational smelter.
Using a core drill, floor saw, and wall saw, our team delivered accurate, efficient cuts while maintaining the highest safety standards.

Check out the photos and videos to see the process in action, from setup, to precision drilling, to the final lifted sections.

Concrete Worm has just completed a rock cutting project. To create a feature and open the space, the rock had to be cut ...
06/02/2025

Concrete Worm has just completed a rock cutting project. To create a feature and open the space, the rock had to be cut on two sides. The rock is on the ground floor of a house in Camps Bay.

Concrete Worm just completed an opening thru a concrete slab for a new staircase. The slab was cut into four pieces and ...
18/03/2024

Concrete Worm just completed an opening thru a concrete slab for a new staircase. The slab was cut into four pieces and lowered to the floor below.

Concrete Worm was hired to cut the tops of twelve heavily reinforced concrete piles. The piles form part of the foundati...
17/12/2023

Concrete Worm was hired to cut the tops of twelve heavily reinforced concrete piles. The piles form part of the foundations of a new vehicle bridge.

Concrete Worm was contracted to take core samples from the roof of the Portswood tunnel in the V&A Waterfront. The sampl...
18/06/2023

Concrete Worm was contracted to take core samples from the roof of the Portswood tunnel in the V&A Waterfront. The samples were then sent for compressive strength tests.

Concrete Worm recently completed a job in the Overberg. We drilled 550mm holes through concrete slabs to facilitate the ...
01/03/2023

Concrete Worm recently completed a job in the Overberg. We drilled 550mm holes through concrete slabs to facilitate the installation of electric motors.

Concrete Worm has successfully completed two penetrations through a 3 meter concrete slab. Stitch drilling conservative ...
14/09/2022

Concrete Worm has successfully completed two penetrations through a 3 meter concrete slab. Stitch drilling conservative 130mm cores was the chosen method and 10 cubic meters of concrete was removed. The penetrations were made to allow the installation of new pumps and valves in Africa’s oldest dry dock. This is the oldest operating dry dock of its kind in the world.

A beautiful day at the sea side. Today we took a core sample from the Oceana Power Boat Club slipway to identify the dif...
05/05/2022

A beautiful day at the sea side. Today we took a core sample from the Oceana Power Boat Club slipway to identify the different layers of concrete.

Concrete Worm has just completed the removal of a church steeple in Bellville. The steeple weighed more than 50 tons. It...
02/11/2021

Concrete Worm has just completed the removal of a church steeple in Bellville. The steeple weighed more than 50 tons. It was cut into four pieces and lowered to the ground by means of a crane. We had to work from a cage suspended from a second crane. We cut the structure with our remote controlled wall saw.

Concrete Worm has just completed the removal of a concrete roof slab of a strong room in Stellenbosch. What made this jo...
02/09/2021

Concrete Worm has just completed the removal of a concrete roof slab of a strong room in Stellenbosch. What made this job challenging was that we had to cut the 25 square meter slab in 25 blocks from underneath.

Today we are drilling and using epoxy to fix steel dowel bars into piles at a new 5000 sq m development on the foreshore...
06/11/2020

Today we are drilling and using epoxy to fix steel dowel bars into piles at a new 5000 sq m development on the foreshore.

Address

24 Stillewater Street
Durbanville
7550

Telephone

0219794937

Website

Alerts

Be the first to know and let us send you an email when Concrete Worm posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Concrete Worm:

Shortcuts

Share