JECCA Engineering

Directions

JECCA Engineering Jecca Engineering.Premium quality engineering

19/09/2026

Jecca Engineering β€” We Build To Last.

88kV Substation Construction Project β€” Progress Update.

βœ… Current Transformers (CTs) installed
βœ… Circuit Breaker (CB) stands installed
βœ… Voltage Transformer (VT) sets installed
βœ… Isolator structure stands assembled

We now proceed with primary equipment installation across the switchyard.

Steady progress, strong workmanship β€” every stage bringing this substation closer to energisation.

πŸ“ 3148 Flame Lilly, Bluffhill, Harare, Zimbabwe
πŸ“ž +263 71 948 2663 | +263771327706
πŸ“§ [email protected]
🌐 www.jeccaengineering.com

πŸ“’ WE ARE HIRING | FINANCIAL ACCOUNTANTJecca Engineering (Pvt) Ltd is looking for an experienced Financial Accountant to ...
16/09/2026

πŸ“’ WE ARE HIRING | FINANCIAL ACCOUNTANT
Jecca Engineering (Pvt) Ltd is looking for an experienced Financial Accountant to join our Finance Department.
Location: Harare
Type: Full Time
Closing Date: 18 September 2026
The ideal candidate should have a Bachelor’s degree in Accounting, Finance or equivalent, 2–5 years’ relevant experience, and sound knowledge of ZIMRA and statutory requirements. Experience in construction, engineering or project-based environments will be an advantage.

πŸ“© To apply: Send your CV and certified academic/professional certificates to [email protected]
Subject: ACCOUNTANT APPLICATION
Please share this opportunity with someone who may be a suitable candidate.

Premium Quality Engineering Is Always In Our Hands.132kV Isolator Installation β€” Substation Switchyard Works In Progress...
14/09/2026

Premium Quality Engineering Is Always In Our Hands.

132kV Isolator Installation β€” Substation Switchyard Works In Progress. Our technicians have been hard at work across the switchyard, installing and commissioning disconnector (isolator) equipment β€” precision teamwork at height, on the ground, and everywhere in between.

Scope of Work:

⚑ Steel Channel Crossarm Installation
Support crossarms installed to carry isolator assemblies and busbar connections at correct height and alignment.

⚑ Opening and Closing Rod Installation
Mechanical operating linkages fitted to enable synchronized isolator operation across all phases.

⚑ Mechanical Operation Testing and Adjustments
Each isolator put through open/close cycles to verify smooth travel and correct contact alignment.

⚑ Primary Wiring (Jumpering) on Reserve Busbar
Jumper connections installed to restore electrical continuity across the switching path.

Progress:
βœ… A cumulative number of isolators now installed and commissioned across the yard
⏳ Remaining isolator and Current Transformer (CT) installations scheduled for the next planned shutdown, allowing safe access to live sections of the busbar

Great teamwork from our technicians β€” working safely at height with full harness protection, coordinating lifts, and getting every connection right the first time.

At Jecca Engineering, progress is measured not only by what we build, but by the lasting impact our projects create.

πŸ“ 3148 Flame Lilly, Bluffhill, Harare, Zimbabwe
πŸ“ž +263 71 948 2663 | +263771327706
πŸ“§ [email protected]
🌐 www.jeccaengineering.com

⚑️ WE'RE HIRING: CLASS 1 RIGGER | Unki Mine Solar ProjectJecca Engineering (Pvt) Ltd, a leading Electrical Power Infrast...
10/09/2026

⚑️ WE'RE HIRING: CLASS 1 RIGGER | Unki Mine Solar Project

Jecca Engineering (Pvt) Ltd, a leading Electrical Power Infrastructure Construction company, is looking for a qualified and experienced Class 1 Rigger to join our Operations Department.

πŸ“ Location: Unki Mine Solar Project (Shurugwi)
πŸ“„ Contract Type: Fixed-Term / Project-Based

Key Responsibilities:
πŸ”ΈRig, lift, install and align transmission structures, towers, poles, transformers and substation equipment
πŸ”ΈInterpret rigging drawings, load charts and method statements
πŸ”ΈInspect and use rigging equipment including slings, shackles, chain blocks, wire ropes and pulleys
πŸ”ΈSignal and guide crane and lifting operations
Supervise Assistant Riggers and General Hands, conduct pre-lift inspections and toolbox talks
πŸ”ΈEnsure full compliance with lifting plans and SHEQ requirements

Requirements:
πŸ”ΈClass 1 Rigger Certificate and National Certificate in Rigging
3-5 years' experience in transmission, distribution and substation construction
πŸ”ΈValid First Aid / SHEQ certificates will be an added advantage
πŸ”ΈPhysically fit and able to work at heights

How to Apply:
Interested candidates should send a detailed CV together with certified copies of qualifications to:

Email: [email protected]
WhatsApp: 0774 137 589 / 0788 998 758

⏰ Closing Date: 11 September 2026

Only shortlisted candidates will be contacted.
Jecca Engineering (Pvt) Ltd is an Equal Opportunity Employer.

Know someone who fits? Tag them or share this post.

JECCA Engineering always delivers Premium Quality Engineering.Site Inspection Completed βœ…Line Construction:Steel poles, ...
09/09/2026

JECCA Engineering always delivers Premium Quality Engineering.

Site Inspection Completed βœ…

Line Construction:
Steel poles, method statement, and isolator reworks all inspected and compliant. Trenching, kiosk installation, NGR plinths, and final finishing to follow.

Switching Station:
Civil works are progressing well. Final finishing, compaction, and access road next.

Every detail is checked before every step forward.

At Jecca Engineering, progress is measured not only by what we build, but by the lasting impact our projects create.

πŸ“ 3148 Flame Lilly, Bluffhill, Harare, Zimbabwe
πŸ“ž +263 71 948 2663 | +263 77 806 7085
πŸ“§ [email protected]
🌐 www.jeccaengineering.com

Premium Quality Engineering Is Always In Our Hands.11kV Overhead Steel Pole Line, Foundation and Backfill Works In Progr...
02/09/2026

Premium Quality Engineering Is Always In Our Hands.

11kV Overhead Steel Pole Line, Foundation and Backfill Works In Progress. Our team is on site across a challenging terrain, executing one of the most critical yet understated stages of overhead line construction: pole foundation backfilling and compaction. Every pole standing true today is a result of disciplined Electromechanical Engineering practice beneath the surface.

Technical Process β€” Backfilling & Compaction:

βš™οΈ Cement-Soil Mix Backfilling
A stabilized cement-soil mixture is placed around each steel pole base, forming a semi-rigid collar that significantly increases the load-bearing capacity of the surrounding soil compared to backfilling with loose earth alone.

βš™οΈ Layered Compaction Using Plate Compactors
Backfill material is placed and compacted in controlled lifts using vibratory plate compactors, eliminating air voids and achieving uniform density around the pole base critical for consistent load transfer into the ground.

βš™οΈ Pole Verticality And Alignment Control
Compaction is carried out systematically to maintain pole plumb and alignment, ensuring the structure remains true to design position under mechanical loading from conductor tension and wind forces.

Key Technical Advantages:

βœ… Enhanced Foundation Stability
The cement-stabilized backfill resists soil settlement and erosion over time, keeping pole foundations firm even under fluctuating soil moisture conditions common across our varied terrain.

βœ… Increased Overturning Moment Resistance
Well-compacted backfill improves the soil's passive resistance against lateral loads, helping the foundation resist the overturning forces generated by conductor tension, wind loading, and angle/tension pole configurations.

βœ… Long-Term Structural Reliability
Proper compaction minimizes future pole tilt or subsidence, reducing the need for remedial realignment and extending the maintenance-free service life of the line.

βœ… Consistent Load Distribution
A uniformly compacted base ensures loads from the pole and conductor system are transferred evenly into the surrounding soil, avoiding stress concentration points that could compromise foundation integrity.

βœ… Rock and Rugged Terrain Adaptability
Even across rocky, undulating terrain like this, controlled backfilling techniques allow us to establish stable foundations without compromising on quality or structural performance.

From excavation to final compaction, every step reflects our commitment to engineering integrity that starts below ground and stands tall above it.

πŸ“ 3148 Flame Lilly, Bluffhill, Harare, Zimbabwe
πŸ“ž +263 71 948 2663 | +263 77 806 7085
πŸ“§ [email protected]
🌐 www.jeccaengineering.com

Premium Quality Engineering Is Being Delivered Here.Solar Farm Project Approaching Completion. As the sun sets on anothe...
31/08/2026

Premium Quality Engineering Is Being Delivered Here.

Solar Farm Project Approaching Completion. As the sun sets on another day of construction, it rises on a project that will power progress for generations. Jecca Engineering stands proud as a leading force in Electromechanical Engineering, delivering utility-scale solar infrastructure that sets the benchmark for excellence in Zimbabwe's renewable energy landscape.

Engineering Excellence Behind Every Panel:

β˜€οΈ PV Array Installation & Module Stringing
Thousands of photovoltaic modules have been meticulously installed across engineered mounting structures, precision-aligned for optimal solar irradiance capture and configured into series strings to achieve designed DC voltage output.

β˜€οΈ DC Collection And Combiner Systems
Module strings are consolidated through combiner boxes, engineered to aggregate DC current safely while incorporating overcurrent protection and isolation for system integrity across the array field.

β˜€οΈ Inverter Station Integration
Central and string inverter stations convert harvested DC energy into grid-compliant AC power, engineered with maximum power point tracking (MPPT) to optimize energy yield across varying irradiance conditions throughout the day.

β˜€οΈ *Medium Voltage Collection Network
An underground MV collection network gathers power from inverter stations, stepping up voltage through on-site transformers for efficient transmission toward the grid interconnection point.

β˜€οΈ Structural And Foundation Engineering
Every mounting frame is anchored to engineered foundations designed to withstand wind loading and thermal cycling ensuring decades of structural resilience across this expansive solar field.

β˜€οΈ Grid Interconnection And Commissioning
Final testing, protection coordination, and synchronization protocols are underway, preparing this facility for seamless integration into the national grid delivering clean, reliable, dispatchable energy at scale.

This is more than a project. It's a legacy of power.

From foundation to full energization, this Solar Farm reflects the calibre of Electromechanical Engineering that defines Jecca Engineering precision, discipline, and an unwavering commitment to premium quality on every megawatt we help bring to life.

πŸ”† Powering Zimbabwe's future, one panel at a time.

At Jecca Engineering, progress is measured not only by what we build, but by the lasting impact our projects create.

πŸ“ 3148 Flame Lilly, Bluffhill, Harare, Zimbabwe
πŸ“ž +263 71 948 2663 | +263 77 806 7085
πŸ“§ [email protected]
🌐 www.jeccaengineering.com

Another day, another line energized β€” Premium Quality Engineering by Jecca Engineering. ⚑Overhead power line constructio...
14/08/2026

Another day, another line energized β€” Premium Quality Engineering by Jecca Engineering. ⚑

Overhead power line construction is a precise, multi-stage process and our team executed it today with the technical discipline and professionalism that defines our work:

πŸ”Ή Pole Er****on: Concrete distribution poles planted and aligned to correct depth and verticality, forming the backbone of the overhead network.

πŸ”Ή Cross-Arm and Insulator Installation: Cross-arms fitted at the pole head with pin and disc insulators mounted to provide electrical isolation between the conductors and the pole structure.

πŸ”Ή Conductor Stringing: Conductors paid out along the route and pulled through, ready for tensioning across the span.

πŸ”Ή Sagging and Tensioning: Conductors tensioned to the correct sag balancing mechanical strength with safe ground clearance.

πŸ”Ή Termination and Dead-Ending: Conductors securely terminated at pole structures, ensuring stable mechanical anchoring and reliable electrical continuity.

πŸ”Ή Working at Height, Safely Our linesmen worked from ladders at elevation, in full PPE hard hats, harnesses, and high-visibility gear following strict safety protocols throughout.

Every stage demands coordination, technical know-how and teamwork and that's exactly what our crew brought to site today. πŸ’ͺ

At Jecca Engineering, progress is measured not only by what we build, but by the lasting impact our projects create.

πŸ“ 3148 Flame Lilly, Bluffhill, Harare, Zimbabwe
πŸ“ž +263 71 948 2663 | +263 77 806 7085
πŸ“§ [email protected]
🌐 www.jeccaengineering.com

Even in the coldest of days, Jecca still delivers premium quality. ❄️Cold mornings, misty roads, tough conditions none o...
12/08/2026

Even in the coldest of days, Jecca still delivers premium quality. ❄️

Cold mornings, misty roads, tough conditions none of it changes how we work. At Jecca Engineering, quality doesn't take a day off.

At Jecca Engineering, progress is measured not only by what we build, but by the lasting impact our projects create.

πŸ“ 3148 Flame Lilly, Bluffhill, Harare, Zimbabwe

πŸ“ž +263 71 948 2663 | +263 77 806 7085
πŸ“§ [email protected]
🌐 www.jeccaengineering.com

Address

17B Lomagundi Road
Harare
263

Website

Alerts

Be the first to know and let us send you an email when JECCA Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share