Focus Industrial

01/09/2026

The cheapest compressed air piping option quoted is not always the cheapest option over the lifespan of your system...

Polyethylene piping can appear to be the most cost-effective option, but it requires three to four times more bracketing than metal piping, adding both materials and installation hours to the job. On longer runs, the material's flexibility also means expansion joints are often required. In high-clearance warehouses, a pipe failure at height can mean a full day of production downtime to repair.

The material your compressed air piping is made from matters more than most workshops realise, whether you are setting up for the first time, relocating, or dealing with an ageing system.

We broke down when and where all three materials should be used for your compressed air system: poly, aluminium, and stainless steel.

Check out the full guide on our website: https://www.focusindustrial.com.au/compressed-air-piping/

19/08/2026

If you run a timber joinery workshop, your compressed air system is working harder than you might think.

A CNC machine, panel saw, edgebander, nail guns, blow guns, drills, etc., all draw from the same system, often at the same time. When that system isn't sized and laid out correctly for your workshop, pressure drop-offs, tool performance, and productivity are all affected.

Our recent install at the Joinery Haus in Newcastle ensured every tool gets consistent air regardless of what else is running.

If your current setup is struggling to keep up with your workshop, it might not be the compressor. It might be how the whole system is engineered.

See the full install:

We supply and install air compressors for woodworking workshops, engineered for CNC machines and air tools; see our installation at The Joinery Haus.

17/08/2026

Focus Industrial is now installing with our expanded team in Victoria.

With our new satellite team in Melbourne, we recently installed a compressed air system for United Dreams, a new timber joinery workshop. They needed a reliable compressed air system to support their CNC machine, hand tools, and edgebander without taking up valuable wall space for timber storage.

The piping was run high, with outlets positioned throughout, and the system was sized with their next piece of equipment already in mind.

We don’t just sell compressors; we engineer custom systems for each workshop fit-out.

Focus Industrial now has a dedicated service team in Victoria. If you're a local business looking for the same standard of compressed air system design and service support our NSW customers have relied on for 50 years, reach out.

See the full install: focusindustrial.com.au/recent-projects/compressed-air-system-victoria

11/08/2026

Behind the scenes at our workshop, our service team works diligently to keep air compressors running with maximum uptime.

From airends and separators to control panels, attention to the subtle inner workings is what keeps workshops across Australia moving without interruption.

If it's been a while since your system had a proper look-over, get in touch with our team — https://www.focusindustrial.com.au/air-compressor-service-program/

03/08/2026

Most industrial compressors sold in Australia aren't sitting in a warehouse waiting for you… they are on a boat.

This is our Penrith warehouse on a regular day, stacked with dozens of compressors prepped, tested, and ready to go.

When your operation needs a new system, the last thing you want to do is wait weeks for stock to arrive from overseas before installation can even begin.

We keep extensive stock on hand, so your timeline stays on track. Partnering with us means a rapid turnaround on your turnkey compressed air solution.

Need compressed air fast?
Reach out - we offer free consultations.

27/07/2026

Maspro Engineering has been with us for 12 years.
When their Condobolin facility expanded, we already knew the operation well enough to design exactly what they needed. We built on the compressed air foundation we established together over a decade ago.

This is what a long-term service relationship looks like in practice: a system designed not just for today's demand, but for whatever comes next.

See the full 100 HP installation –
https://www.focusindustrial.com.au/recent-projects/variable-speed-screw-compressor-installation/

12/07/2026

Thank you, Enviroline Group, for the excellent custom fit-out, helping us expand our reach into Melbourne with our new fleet van!

07/07/2026

In 1976, Graham Bulloch started out repairing pneumatic tools from a humble workshop in Western Sydney.

Fifty years later, three generations of a family business, and a nationwide footprint later, Focus Industrial is a significant contributor to keeping Australian industry running. We sell, engineer installations, and service machines with technicians on call 24/7 from Byron Bay to Adelaide.

The tools have changed, and our name has grown, but the family behind it remains at the core. Here's to the next fifty years! 💪

Read the full story - https://www.focusindustrial.com.au/industrial-compressed-air-solutions-australia/

30/06/2026

Most Australian factories are overspending on compressed air every shift and don't even realise it. It's a problem we've been solving since 1976.

We were recently featured in Industry Update Magazine, reflecting on five decades of industrial compressed air solutions across Australia.

From a small pneumatic tools shop to a triple-stacked mezzanine in Penrith, we are a three-generation-strong Australian family business, servicing operations from Byron Bay to Adelaide.

The full story is live - https://www.industryupdate.com.au/article/focus-five-decades-keeping-australian-industry-running