Kawana Rewinds

12/11/2026

💦 DID YOU KNOW?

How long should a chlorinator cell last?
Your chlorinator cell works hard behind the scenes to keep your pool water clean and sanitised. But just like any other piece of pool equipment, it won't last forever!

⏳ So, what's the average lifespan?
Most saltwater chlorinator cells last around 3–7 years, depending on the brand, model, usage and how well they're maintained.
Some may last longer, while others wear out sooner.

🔍 What affects the lifespan of your cell?
🔹 Water Chemistry – Poorly balanced pool water can contribute to calcium build-up and premature wear. Keeping your pH, salt levels and calcium hardness within the manufacturer's recommended ranges is important.
🔹 Operating Hours – The more hours your chlorinator operates, the more wear the cell experiences. Running at unnecessarily high chlorine output can also shorten its lifespan.
🔹 Calcium Build-Up – Those white, crusty deposits on your cell plates can interfere with chlorine production. Regular inspection and appropriate cleaning can help maintain performance.
🔹 Maintenance – Keeping your pool water balanced, checking your cell regularly and following the manufacturer's cleaning instructions can make a real difference.

⚠️ A quick tip about cleaning!
If your cell has calcium build-up, always follow the manufacturer's cleaning instructions. Some cells can be cleaned using a properly diluted hydrochloric acid solution, but unnecessary or excessive acid cleaning can damage the cell's protective coating and shorten its life. Never scrape the plates with metal tools!

🔧 How do you know when your cell needs replacing?
Watch for signs such as:
🔹 Reduced chlorine production despite correct water chemistry and settings
🔹 Persistent low chlorine or cell fault warnings
🔹 Visible wear or damage to the cell plates
🔹 A cell that no longer performs properly even after appropriate maintenance

Before you replace your entire chlorinator, check with us!
At Kawana Rewinds, we supply replacement chlorinator cells for a range of brands and models, including some older and discontinued units.Sometimes a replacement cell is all you need to keep your existing chlorinator going!

💙 Keeping Sunshine Coast pools running since 1996.
📍 Unit 4/8 Tandem Avenue, Warana
📞 (07) 5493 9068
📧 [email protected]

09/11/2026

🔧 HOW DOES OUR REPAIR PROCESS WORK?
Got a pool pump, chlorinator or electric motor that's not working as it should?
At Kawana Rewinds, we make the repair process simple and straightforward. Here's what to expect when you bring your equipment into our workshop.

🔹 STEP 1 – BRING IT IN
Bring your faulty pump, chlorinator or motor into our workshop at Unit 4/8 Tandem Avenue, Warana.
An initial assessment fee/deposit applies:
💙 $66 – Pool pumps and chlorinators
💙 $110 – Builders range equipment
The deposit is deducted from the final cost if you proceed with the repair or replacement.

🔹 STEP 2 – ASSESS & QUOTE
Our experienced technicians inspect your equipment to identify the problem and determine the best course of action.
We aim to provide a repair or replacement quote within 2–3 business days, unless otherwise advised.

🔹 STEP 3 – YOU DECIDE
Once we've assessed your equipment, we'll let you know your options.
✅ Repair the existing equipment
✅ Replace it if that's the better option
✅ Decide not to proceed
No repairs are carried out without your approval.

🔹 STEP 4 – REPAIR, REPLACE OR RETURN
Once you've given us the go-ahead, we'll complete the repair or arrange the replacement equipment.
If you choose not to proceed and would like your equipment returned reassembled, a reassembly fee may apply.

🛠️ PLEASE NOTE – WORKSHOP SERVICE ONLY
Kawana Rewinds operates as a workshop-based repair service. We don't offer on-site service calls, so equipment needs to be brought into our workshop for assessment.

💙 Why replace it if it can be repaired?
With over 30 years of experience, our team takes pride in finding practical, cost-efective solutions to keep your equipment running.

📍 Unit 4/8 Tandem Avenue, Warana
📞 (07) 5493 9068
📧 [email protected]

30/10/2026

💦 DID YOU KNOW? Why is your pool pump losing prime?

Ever noticed your pool pump struggling to get going, blowing bubbles into the pool, or suddenly losing water flow?

Your pump could be losing its prime!
A pool pump needs to be filled with water to operate properly. When air gets into the system, it can interrupt water circulation and stop your pump from working efficiently.

🔍 So, what causes a pump to lose prime?
🔹 Low pool water levels – If the water level drops too low, your skimmer can start sucking in air instead of water.
🔹 Blocked skimmer baskets – Leaves and debris can restrict water flow and make it harder for your pump to operate properly.
🔹 Air leaks – Loose fittings, cracked pipes or worn seals on the suction side can allow air into the system.
🔹 Worn lid O-rings – A damaged or poorly seated O-ring can prevent your pump from maintaining a proper seal.
🔹 Other issues – Faulty valves, blockages or internal pump problems can also contribute to losing prime.

🔧 Still having trouble?
If you've checked the simple things and your pump still won't hold prime, it might be time to have it professionally assessed.

At Kawana Rewinds, we specialise in pool pump repairs and can help diagnose the problem and advise whether repairing or replacing your pump is the best option.

💙 Keeping Sunshine Coast pools running since 1996!
📍 Unit 4/8 Tandem Avenue, Warana
📞 (07) 5493 9068
📧 [email protected]

26/10/2026

💙 We love hearing feedback like this! A huge thank you to Cherie and the team Pools for their continued trust and support. It's always a pleasure working with you!

26/10/2026

💡After Sunshine Coast copped a ton of rain last week and this weeks 30 degree temp forecast, be sure to pop in store for a free water test and rebalance the pool water to avoid a green pool! 💦

22/10/2026

💡 DID YOU KNOW? What does a motor capacitor actually do?
Ever switched on your pool pump and heard it humming, but nothing happens? 🤔
Before you assume the whole pump needs replacing, the problem could be something as small as a faulty capacitor!

⚡ So, what does a capacitor do?
Depending on the motor, there are two types:
🔹 Start Capacitor – Helps provide the boost needed to get the motor turning.
🔹 Run Capacitor – Helps the motor operate smoothly and efficiently while it's running.

🔧 Signs your capacitor might be faulty:
• Your pump hums but won't start
• The motor struggles to get going
• Your pump starts intermittently
• The motor trips its overload protection

✅ THE GOOD NEWS?
A faulty capacitor doesn't necessarily mean you need a whole new motor or pool pump!
In many cases, a qualified professional can diagnose the problem and replace the faulty capacitor, potentially saving you the cost of replacing the entire unit.

⚠️ SAFETY ALERT!
Capacitors can retain a dangerous electrical charge even after the power has been switched off.
All capacitors must be replaced by a qualified electrician. Never attempt to inspect, disconnect or replace one yourself.

💙 That's where Kawana Rewinds comes in!
With over 30 years on the Sunshine Coast, our experienced & qualified team can assess your faulty pool pump and provide honest advice on whether repair or replacement is your best option.
📍 Unit 4/8 Tandem Avenue, Warana
📞 (07) 5493 9068
📧 [email protected]

19/10/2026

19/10/2026

💦 QUALITY EBARA PUMPS — IN STOCK NOW! 💦
Looking for a reliable, high-performance pump? We've got you covered!

At Kawana Rewinds, we stock a range of quality EBARA pumps, known for their reliability, durability and performance across a variety of applications.

🔧 CURRENTLY IN STOCK:
✅ EBARA DWO Series: 400, 200 and 150
✅ EBARA CDX Series: CDX200

💧 Need something different?
We can also order in other EBARA pumps to suit your requirements, including the DVS range of submersible pumps. Whether you're replacing an existing pump or looking for something for a new application, our experienced team can help you find the right solution.

💙 Why choose Kawana Rewinds?
✔️ Genuine EBARA products
✔️ Quality pumps from a trusted manufacturer
✔️ Expert advice and local support
✔️ Family-owned Sunshine Coast business with over 30 years of experience

📞 Give us a call to discuss pricing and availability, or pop in and see the team!
📍 Unit 4/8 Tandem Avenue, Warana
📞 (07) 5493 9068
📧 [email protected]

12/10/2026

☀️ SUMMER IS ON ITS WAY — BEAT THE RUSH! ☀️
With the weather warming up, now's the perfect time to get your pool equipment checked before the summer rush hits!
💦 Pool pumps & chlorinators
🔧 Electric motors & rewinds
⚙️ Commercial & industrial equipment repairs

Whether it's making strange noises, not running as it should, or just needs some attention, don't wait until it breaks down when you need it most!
✅ Get ahead of the summer rush
✅ Beat upcoming price increases
✅ Fast turnaround on quotes & repairs
✅ Honest advice on repairing vs replacing

Bring it in now and let our experienced team take a look!
💙 Kawana Rewinds

Local. Family owned. Keeping the Sunshine Coast running for 30 years!
📍 Unit 4/8 Tandem Avenue, Warana
📞 (07) 5493 9068
📧 [email protected]

28/09/2026

💧 DID YOU KNOW? Calcium build-up can shorten the life of your chlorinator cell

That white, crusty build-up you sometimes see on a salt chlorinator cell is usually calcium scale.

If your pool water is hard or your water chemistry isn't balanced, calcium can build up on the cell plates, reducing water flow and making it harder for your chlorinator to do its job.

A little regular maintenance can make a big difference

💧 Keep your pool water balanced
Managing calcium hardness and pH can help reduce scale formation. If your fill water is naturally hard, talk to your pool professional about options for managing or softening the water.

🧽 Check your cell regularly
A light coating may be removable before it becomes heavy scale. Don't scrape the cell plates with metal tools, as they can damage the coating.

🧪 Clean calcium build-up safely
Where recommended by your chlorinator manufacturer, calcium can be removed using a diluted hydrochloric acid bath. Follow the manufacturer's instructions, wear appropriate PPE and remember: always add acid to water — never water to acid.

⚠️ Avoid scraping the cell plates with metal tools and don't overdo acid cleaning, as either can damage the cell.

Not sure whether your cell just needs a clean or is getting close to replacement? Give the team at Kawana Rewinds a call and we'll point you in the right direction.

📞 (07) 5493 9068
📧 [email protected]