ATS Electro-Lube International Inc.

Directions Website Contact the business

ATS Electro-Lube International Inc. A.T.S. Electro-Lube International Inc. sells top-of-the-line, self-contained automatic lubrication systems for every industry application.

Clean install, clean floor, and no grease gun in the building.Two Electro-Lubers on this pump and gearbox set — one on t...
11/13/2026

Clean install, clean floor, and no grease gun in the building.

Two Electro-Lubers on this pump and gearbox set — one on the housing, one on an extension to reach the point behind it.

The most widely used single-point unit we make, up to 50 psi in sizes from 60cc to 475cc, doing what it does best.

Today we remember.
11/11/2026

Today we remember.

Two points, two Lubers, mounted straight to the housing.No power, no plumbing, no controller — just up to 50 psi from a ...
11/10/2026

Two points, two Lubers, mounted straight to the housing.

No power, no plumbing, no controller — just up to 50 psi from a sealed, self-contained unit. Visible reservoir level so anyone passing can verify it from the walkway.

Simple is what gets maintained.

Four lubrication points. Four Mini-Lubers.Every point on this drive is fed on its own schedule, set anywhere from 15 day...
11/08/2026

Four lubrication points. Four Mini-Lubers.

Every point on this drive is fed on its own schedule, set anywhere from 15 days to 1 year, in weather that would make a manual round miserable.

Count the units. That’s the whole program.

Outdoors, exposed, and metered to the bearing on schedule.A Mini-Luber 125cc bracket-mounted beside the drive on a treat...
11/05/2026

Outdoors, exposed, and metered to the bearing on schedule.

A Mini-Luber 125cc bracket-mounted beside the drive on a treatment plant mixer. Compact enough to fit where there’s no room, sealed against the weather, and rated from -40°C to +55°C.

One pump. Multiple points. One schedule.A Titan Luber feeds through a distribution block that splits output across sever...
10/16/2026

One pump. Multiple points. One schedule.

A Titan Luber feeds through a distribution block that splits output across several points on this chain drive.

This Electro-Luber is mounted directly to the bearing housing in a hot, steamy process area. Sealed, self-contained, vis...
10/14/2026

This Electro-Luber is mounted directly to the bearing housing in a hot, steamy process area. Sealed, self-contained, visible reservoir level, no power required.

One job, done extremely well. No downtime.

An Ultimate-Luber on an injection moulding machine, plumbed through a manifold with a gauge on the line so output is ver...
10/11/2026

An Ultimate-Luber on an injection moulding machine, plumbed through a manifold with a gauge on the line so output is verifiable at a glance.

Over 1000 psi, up to 12 points. The machine keeps cycling while it works.

This Thanksgiving, we’re grateful for our customers, partners, and team members both near and far!As a proud Canadian ma...
10/10/2026

This Thanksgiving, we’re grateful for our customers, partners, and team members both near and far!

As a proud Canadian manufacturer of leading lubrication solutions, we’re thankful for the opportunity to support businesses across Canada and beyond.

🍂 Happy Thanksgiving from A.T.S. Electro-Lube! 🇨🇦

Address

7388 Wilson Avenue
Delta, BC
V4G1H3

Alerts

Be the first to know and let us send you an email when ATS Electro-Lube International Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ATS Electro-Lube International Inc.:

Shortcuts

Share

Nearby engineering companies