Super Systems Europe

10/06/2026

e-Trim Air/Fuel Ratio Monitoring System

e-Trim – Your Key to Efficient and Cost-Saving Heat Treatment!

The e-Trim Air/Fuel Monitoring System is here to help you get the most out of your heat treatment processes. By using e-Trim, you’ll not only enhance efficiency but also see real savings!

Here’s how e-Trim can make a difference:

Boosts Production: Enjoy an 8.33% increase in your annual production capacity.

Cuts Down CO2 Emissions: Reduce your carbon footprint by 4% each year.

Improves Furnace Utilisation: Achieve a 5.56% improvement in how you use your furnaces.

Saves on Fuel: Potential savings of up to £6000 per year on fuel costs.

05/06/2026

Super Systems develops and manufactures cutting edge products to help the heat treatment industry to measure, control and record their processes.

Here is a video which show cases our range of products and systems:

29/05/2026

Fixed Three Gas (CO, CO2, CH4) Gas Analyser for Multiple Zones

SSi MZA 6010

The MZA 6010 is an innovative fixed multi gas analyser designed to sample multiple zones or furnaces. It continuously measures Carbon Monoxide (CO), Carbon Dioxide (CO2), Methane (CH4), and Hydrogen (H2) (option). The solution is easy and quick to install and provides the benefits of continuous gas analysis from multiple sources cost-effectively versus installing a single sensor per zone or per furnace.

Continuous monitoring of furnace atmospheres improves the repeatability of a process and creates predictive maintenence parameters such as alarming from deviating or increasing CO, CO2, and CH4 values. This can provide advanced warning of furnace soot problems, radiant tube cracks, water or air leaks.

It uses SSi’s infra-red 3 gas sensor and additional analogue inputs or communications to calculate CP%, Kn*, and Kc*. CQI- 9 compliant users can fulfill the daily generator and furnace atmosphere verification automatically in conjunction with the included PC software.

Note: also available in custom engineered air conditioned Rittal Cabinet.

SSi MZA 6010 The MZA 6010 is an innovative fixed multi gas analyser designed to sample multiple zones or furnaces. It continuously measures Carbon Monoxide (CO), Carbon Dioxide (CO2), Methane (CH4), and Hydrogen (H2) (option). The solution is easy and quick to install and provides the benefits of co...

22/05/2026

Fixed Dew Point Analyser (Low Range)

SSi DPC3500

The SSi DPC3500 is a low range dew point analyser designed for continuous monitoring of dew point. It features a simple digital display and communications for dew point retransmission to an external PLC or SCADA system.

It is commonly used for the sampling of furnace atmopshere or the purity verification of hydrogen, nitrogen or argon gasses.

SSi DPC3500 The SSi DPC3500 is a low range dew point analyser designed for continuous monitoring of dew point. It features a simple digital display and communications for dew point retransmission to an external PLC or SCADA system. It is commonly used for the sampling of furnace atmopshere or the pu...

07/05/2026

Oxygen Probe for Endothermic Gas Generators

SSi Bazooka Probe

The Bazooka Probe is designed to control the gas quality of endothermic generators. It is a reliable and high value sensor for controlling the gas composition of an endothermic gas generator compared to dew point, Lambda probe, and infrared technology.

It uses heat from the endothermic gas generator to heat the zirconia sensing element. The sampled exhaust gas is passed over the sensing element using the positive pressure of the generator. That means it can be installed at a relatively low temperature, ensuring a long lifetime.

30/04/2026

Carburising Furnace Controller

SSi 9120

The powerful 9120 dual loop controller can control both temperature and atmosphere (carbon potential CP%, oxygen O2%, dew point, mV) on a endothermic gas generator, carburising sealed quench, pit, continuous mesh belt, cast link, or pusher furnace.

The instrument is developed to improve the visibility and ease of use of key parameters. It includes data logging/chart recording functions and advanced oxygen probe features such as multiple burn-off/purge features, alarms for high impedance and poor response which can aid predictive maintenance plans.

The 9120 is ideal for endothermic gas generators.

SSi 9120 The powerful 9120 dual loop controller can control both temperature and atmosphere (carbon potential CP%, oxygen O2%, dew point, mV) on a endothermic gas generator, carburising sealed quench, pit, continuous mesh belt, cast link, or pusher furnace. The instrument is developed to improve the...

23/04/2026

SSi eFlo 2.0

SSi flow meters are designed for harsh environments using superior technology for measuring gas and liquid flow and are available in a variety of options to suit your application.

eFlo 2.0 is SSi’s newest electronic flow measurement instrument. Like our previous eFlo models, the 2.0 offers simple compatibility with existing controls, making tracking and monitoring gas flows easier than ever. Designed for use in the harshest industrial environments, eFlo allows for easy replacement of manual flow meters and seamlessly integrates into existing control systems.

SSi flow meters designed for harsh environments using superior technology for measuring gas and liquid flow and available in a variety of options to suit your application. SSi eFlo 2.0 eFlo 2.0 is SSi’s newest electronic flow measurement instrument. Like our previous eFlo models, the 2.0 offers si...

16/04/2026

SuperGen

Fueled by V-Mix

SuperGen represents the third generation of controlled endothermic and exothermic gas production. Utilizing the latest sensor technology, SuperGen continuously updates the flow curve database based on atmospheric changes and catalyst conditions. As a result SuperGen provides improved process control, increased turndown and faster response to gas demand changes.

Key Features include:

Direct replacement for carburizer mixing systems
Controls generator temperature & dew point
Flexible blower configurations simplifies pipe installation
Local display for setup and troubleshooting
Flexible resizing of smallest to largest blower replacement
Simplified wiring using standard industrial circular connections
Local VFD minimizing wiring to reduce EMI
Automated Features:
Trim control for accurate dew point
Clogged filter alarm
Over/under drive of ratio making up reaction gas lag
Ratio table created for demand variation
Automatic sensor tare at start-up

Fueled by V-Mix SuperGen represents the third generation of controlled endothermic and exothermic gas production. Utilizing the latest sensor technology, SuperGen continuously updates the flow curve database based on atmospheric changes and catalyst conditions. As a result SuperGen provides improved...

10/04/2026

Fixed Dew Point Analyser

SSi DPC2530

The SSi DPC2530 is a simple and robust dew point sensor, sampling pump system, and display to continuously measure, control, and alarm dew point in heat treatment and gas purity monitoring.

Sampling the dew point in heat treatment sectors is important because it directly reflects the moisture content of the furnace atmosphere, which has a big impact on material quality and process control.

DPC 2530 Specifications:

Standard Range:0 to 80°F (-17 to 27°C)

Display:Digital

Accuracy and Repeatability:± °F (± 0.5°C)

Operating Temperature Range:0 to 120°F (-17 to 49°C)

Power:115/240

VAC 60Hz

Resolution:± 1 °F (± 0.1 °C)

Zero and Span Drift:± 1 °F (± 0.5 °C) Maximum

Digital Communications:RS485 (Modbus)

Output:4-20mA

SSi DPC2530 The SSi DPC2530 is a simple and robust dew point sensor, sampling pump system, and display to continuously measure, control, and alarm dew point in heat treatment and gas purity monitoring.

03/04/2026

Portable Touch Screen Data Logger

Portable Data Logger for Temperature Profile

SSi SDS 8120/8140

The SDS is the ultimate temperature uniformity survey (TUS) tool for heat treatment furnaces required to be compliant with CQI-9 and AMS2750E. Performing a regular TUS provides invaluable data that indicates potential issues with furnace heating systems, seals, agitation, thermocouples. With that data, furnace throughput can be maximised and unplanned downtime can be reduced.

The SDS includes all hardware and software needed to quickly and easily create a detailed report on the temperature profile of the furnace. Our experience with thermal profiling to NADCAP standards means that we can support the troubleshooting process if uniformity is outside the required tolerance.

Portable Data Logger for Temperature Profile SSi SDS 8120/8140 The SDS is the ultimate temperature uniformity survey (TUS) tool for heat treatment furnaces required to be compliant with CQI-9 and AMS2750E. Performing a regular TUS provides invaluable data that indicates potential issues with furnace...