Aerzen Machines Limited

Aerzen Machines Limited Compressed air, gas and vacuum solutions. Blowers, compressors, process gas solutions.

Aerzen Machines Limited are a wholly owned daughter Company of the group, charged with servicing and supporting all Aerzen customers and clients in the UK and Ireland. Aerzen Machines was established in 1973 but has been supplying blowers into the UK and Irish markets since the late 1950's. ISO 9001, 14001 and OHSAS 18001 registered, the Company are UVDB verified and Investors in People certified.

This all ensures that customers are given the highest possible standards of quality, health and safety and environmental impact assurance. Aerzen have specialist teams of product managers for blowers, oil-free compressors, vacuum boosters, biogas and process gas blowers and compressors, Centrifugal Turbo compressors and our new range of energy efficient Hybrid machines that are providing class leading efficiencies and WLC's to industry. With extensive workshop capacity, experience and stockholding, local service centres, stores and engineers located throughout the UK and Ireland, Aerzen Machines can offer industry leading support for customers both on site and remotely. Aerzen also offer rental solutions for blowers compressors and ancillaries with package machines available for immediate availability.

In the Unterföhring wastewater treatment plant, AERZEN combines blowers, aerators and control systems into an integrated...
07/09/2026

In the Unterföhring wastewater treatment plant, AERZEN combines blowers, aerators and control systems into an integrated system - taking the biological treatment stage to a new level.

The individual components are perfectly tuned to each other and enable a highly dynamic, load-dependent air supply.

The results: energy and CO2 savings of an estimated 40% with high control quality and permanently stable effluent values.

Read more: https://go.aerzen.net/l/973883/2026-08-19/25jwx4

➡️ How important is reliable process air for the cement and lime industry?🏭 In the cement and lime industry, blowers and...
07/09/2026

➡️ How important is reliable process air for the cement and lime industry?

🏭 In the cement and lime industry, blowers and compressors are a central component of many process steps. They perform a wide range of tasks, from raw material conveyance, through cooling and combustion air, to cement transport and loading into containers, trucks, and railcars. In this environment, it becomes particularly clear to us just how important a reliably designed process air solution is for stable plant operation.

❗️Blowers and compressors play a crucial role in the cement and lime industry: if they fail, the entire process comes to a standstill. This results in enormous costs. The production of cement and lime is highly energy-intensive and technically demanding: Harsh environmental conditions and precisely coordinated processes place high demands on the technology used.

To be well-positioned for the future it is best rely on safe, reliable, and economical processes that conserve resources.

💡 Depending on the application, various technologies may be suitable:

🔹 Rotary lobe blowers
🔹 Screw compressors
🔹 Screw blowers
🔹 Turbo blowers
For us, the cement and lime industry clearly demonstrates that technical solutions are most effective when they are robustly designed and function reliably even under demanding conditions. This is precisely what forms an important foundation for efficiency and process reliability in day-to-day operations. ☝🏼

We're in September now, a lot of people us included are making plans for the end of this year, and for the next. Do you ...
01/09/2026

We're in September now, a lot of people us included are making plans for the end of this year, and for the next. Do you have any maintenance or servicing you require to be done to be done at your site? Let us know.

How much more efficient can you make your wastewater treatment site? 💧 It is important to have a well-designed technical...
28/08/2026

How much more efficient can you make your wastewater treatment site?

💧 It is important to have a well-designed technical solution when designing an aeration process. After all, loads fluctuate and energy must be used more consciously, systems are needed that ensure stability and provide targeted support for processes.

For us, it’s crucial to precisely meet the changing air demand in the aeration tank—in other words, to provide neither too much nor too little air. 💨

If we take these fluctuations into account, we can make overall operations more efficient. This is key to considering modern blower and compressor solutions for water and wastewater treatment. We bring our experience from numerous projects and various application areas worldwide. 🌎

❗️For operators, this means:
🔹 Greater process reliability
🔹 Higher energy efficiency
🔹 Greater sustainability in wastewater treatment

Need vacuum in the range from 300 to 10⁻⁵ mbar? AERZEN delivers with pre-inlet cooled blowers, HV series, and canned-mot...
26/08/2026

Need vacuum in the range from 300 to 10⁻⁵ mbar?
AERZEN delivers with pre-inlet cooled blowers, HV series, and canned-motor blowers—designed for efficiency, longevity, and demanding industrial environments.

🎯 Smaller capacity ranges. Big impact in operation. With the new D11S and D16S models, we are expanding our AERZEN Delta...
24/08/2026

🎯 Smaller capacity ranges. Big impact in operation.

With the new D11S and D16S models, we are expanding our AERZEN Delta Hybrid series in the lower flow rate range and creating additional opportunities for customised, cost-effective process air generation.

The new models :

⚙️ D11S for flow rates from 100 to 780 m³/h
⚙️ D16S for flow rates from 100 to 1,020 m³/h
⚙️ Extended control range of up to 1:5
⚙️ Up to 37% energy savings compared to conventional blowers
⚙️ 100% oil- and PFAS-free process air
⚙️ Integrated variable-frequency drive
⚙️ AERtronic control system for transparent operating data
⚙️ Compact plug-and-play solution and side-by-side installation for space-saving system designs

💡 With the D11S and D16S, we’re extending the proven efficiency and technological advantages of the Delta Hybrid series to new performance ranges.

Built to last. Backed for life. AERZEN machines are made for decades of performance and our after-sales services keep th...
21/08/2026

Built to last. Backed for life. AERZEN machines are made for decades of performance and our after-sales services keep them going strong.

🚀 The new AERZEN Generation 6 turbo blowers. More compact, more efficient, better! With the new Generation 6 turbo blowe...
19/08/2026

🚀 The new AERZEN Generation 6 turbo blowers. More compact, more efficient, better!

With the new Generation 6 turbo blowers, we are consistently advancing our successful AERZEN turbo series and setting new standards for efficient and future-oriented process air generation.

What sets the new G6 turbo blowers apart:

🔹 Up to 15% higher energy efficiency compared to conventional turbo technology
🔹 IoT-ready for remote monitoring to ensure transparent oversight of operating data
🔹 Multilevel frequency converter technology ensures significantly improved overall efficiency.

With the AT125-0.9S G6, AT125-1.3S G6, and AT250-0.9S G6, we are introducing the first models of the new generation. The portfolio is complemented by the new AT450-0.9S turbo stage for flow rates up to 300 m³/min.

➡️ The goal: greater efficiency, greater transparency, and greater flexibility for industrial applications where energy consumption and system performance are critical factors.

Blowers Efficiency Air .0

AERZEN Machines recently hosted a Roadshow and Lunch & Learn session at MWH's offices, we had great conversations and in...
17/08/2026

AERZEN Machines recently hosted a Roadshow and Lunch & Learn session at MWH's offices, we had great conversations and insightful discussions. We showcased our products and talked through the solutions we offer.

Our goal is not only to provide innovative technology but also to empower our customers with the knowledge and expertise to get the most from their systems.

Thank you, MWH, for having us!

13/08/2026

Ever wondered where blowers and compressors fit into food production? 🤔 From the first stages of processing to the final product, AERZEN solutions support key steps across the food industry. Watch the video to see how.

Address

Aerzen House, Langston Road
Loughton
IG103SL

Telephone

+442085028100

Website

,

Alerts

Be the first to know and let us send you an email when Aerzen Machines Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Aerzen Machines Limited:

Shortcuts

Share

Category