Akko Fabrication

Akko Fabrication Specialist welding, fabrication and restoration. Automotive and garage services. Mobile welding.

Restoration
Fabrication
Specialist welding
Automotive
Mobile welding

Specialists in JDM, classic and modified.

Demo job on this afternoon after a nice couple of weeks off 😎🤌🏻💥💥💥💥Cutting up these old machines and rollers for the scr...
08/08/2026

Demo job on this afternoon after a nice couple of weeks off 😎🤌🏻

💥💥💥💥

Cutting up these old machines and rollers for the scrap.

Received some pictures of the 1946 Indian Chief.I helped the owner create this with his ideas 😎We cut down aftermarket f...
28/04/2026

Received some pictures of the 1946 Indian Chief.

I helped the owner create this with his ideas 😎

We cut down aftermarket fenders, made hidden supports and strengthened them internally so no bounce or vibration.

Mounted the lights, chain guards, brake like switches, luggage racks, aftermarket horns.

Added carriers and holes to tuck the wiring etc

The main prognosis was nothing on the frame would be modified so it can go back to original as it such a rare old thing 💎

Anyhow its just come back from the bodyshop and she's all built back up and ready for her maiden voyage 😎

How cool is that 👌🏻

L322 Range Rover for rear arches and rear sill ends/jacking point.R-Tech Welding Equipment Ltd
28/04/2026

L322 Range Rover for rear arches and rear sill ends/jacking point.

R-Tech Welding Equipment Ltd

A bit of structural steelwork going in over in Durham.Only 10 degrees but muggy heat in leather gloves and overalls all ...
25/04/2026

A bit of structural steelwork going in over in Durham.

Only 10 degrees but muggy heat in leather gloves and overalls all day 😓

Bmw x3 inner sill repair
22/04/2026

Bmw x3 inner sill repair

Sierra XR4x4. Rare old thing, forgot they even existed.Cutting out a poor rear sill repair ended up uncovering the inner...
18/04/2026

Sierra XR4x4. Rare old thing, forgot they even existed.

Cutting out a poor rear sill repair ended up uncovering the inner sill to floor wasnt even connected. Held together by hopes and dreams.

Typical sun roof drains rotting out the sills from the inside.

As most of the outer and middle sill were good we decided to tackle it as least invasivly as possible and cut the rot out from the inside leaving the outer sill in place.

Inner sill and floor all cut out and a new inner sill made out of fresh steel. Tied back in to the outer sill.

Next up is make the new floor sections to stitch back into the inner sill like factory. And then rear sill pocket to make and new rear outer sill.

R-Tech Welding Equipment Ltd

18/04/2026

Was legit scared to stand in it haha

Old mk6 Transit work horse. New inner rear wheel arches and floor repairs in 1.5mm.Floor was a bit crusty and some poor ...
18/04/2026

Old mk6 Transit work horse. New inner rear wheel arches and floor repairs in 1.5mm.

Floor was a bit crusty and some poor previous repairs that had absolutely no strength 😬

New arches and tied everything back together properly. Floor stitched back onto chassis leg etc.

She wont win any beauty contests but there's a few more years in the old girl now 💪🏻😎

330 whp supercharged Vauxhall VX220 for stainless exhaust repairs.
08/04/2026

330 whp supercharged Vauxhall VX220 for stainless exhaust repairs.

All set and ready for tomorrow morning 💪🏻R-Tech Welding Equipment Ltd
08/04/2026

All set and ready for tomorrow morning 💪🏻

R-Tech Welding Equipment Ltd

Address

Newcastle Upon Tyne

Website

Alerts

Be the first to know and let us send you an email when Akko Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Akko Fabrication:

Shortcuts

Share

Category