What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

Flux Pumps

Flux manufactures drum & IBC pumps for industrial, chemical, food, pharma & cosmetics applications. All products are individually tested prior to dispatch.

Check out www.flux-pumps.co.uk to see our extensive range of low and high viscosity pumps, drum emptying systems, mixers, filling and metering solutions. Flux invented the electric drum pump in 1950, leading the way in terms of quality, innovation and pump service life. The Flux brand is recognised as a byword for quality, safety and reliability. Every pump and motor is manufactured and assembled

in our dedicated factory near Stuttgart, Germany. Flux pumps are designed to be serviced and maintained - all parts are available to purchase as spares, ensuring our equipment delivers the lowest possible life-cycle cost. Never throw away a FLUX!

10/06/2026

🛢️ 𝗦𝘁𝗿𝘂𝗴𝗴𝗹𝗶𝗻𝗴 𝘁𝗼 𝗽𝘂𝗺𝗽 𝘃𝗶𝘀𝗰𝗼𝘂𝘀 𝗺𝗲𝗱𝗶𝗮 𝗳𝗿𝗼𝗺 𝗱𝗿𝘂𝗺𝘀?

Oils, syrups, resins, creams, pastes and purees can slow production down - and standard drum pumps simply can’t cope.

High viscosity fluids often result in:

❌ Slow, inconsistent flow
❌ Motor overload
❌ Blockages
❌ Manual scooping
❌ Mess, downtime and wasted product

💡 𝗧𝗵𝗲 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻: 𝗙𝗟𝗨𝗫 𝗩𝗶𝘀𝗰𝗼𝗣𝗼𝘄𝗲𝗿 𝗣𝗿𝗼𝗴𝗿𝗲𝘀𝘀𝗶𝘃𝗲 𝗖𝗮𝘃𝗶𝘁𝘆 𝗣𝘂𝗺𝗽𝘀

Engineered specifically for high viscosity and shear sensitive media, ViscoPower delivers smooth, pulsation free transfer - even with non-flowable products such as tomato paste or peanut butter.

✔ Designed for thick, paste like and particulate laden liquids
✔ Rotor–stator operating principle can pass solids up to 8 mm diameter, preventing blockages
✔ Ideal for oils, adhesives, creams, clays, syrups, resins and pastes
✔ Suitable for food, cosmetic, chemical and adhesive applications
✔ Flow rates up to 50 LPM, discharge pressure up to 15 Bar
✔ Powered by electric or compressed air motors
✔ Few moving parts - Extremely easy to clean and maintain, with a complete range of spare parts available.

If thick, viscous fluids are slowing down your operation, Flux Viscopower can provide the solution.

👉 𝗘𝘅𝗽𝗹𝗼𝗿𝗲 𝘁𝗵𝗲 𝗩𝗶𝘀𝗰𝗼𝗣𝗼𝘄𝗲𝗿 𝗿𝗮𝗻𝗴𝗲:
https://www.flux-pumps.co.uk/pump-by-type/high-viscosity-drum-pump/

01/06/2026

🔍 𝗙 𝟰𝟮𝟰 𝘃𝘀 𝗙 𝟰𝟮𝟲 - 𝘄𝗵𝗮𝘁’𝘀 𝘁𝗵𝗲 𝗱𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝗰𝗲?

While both pumps are vertical, centrifugal drum pump designs, they’re built for very different applications.

🟦 𝗙 𝟰𝟮𝟰 – 𝗛𝗶𝗴𝗵 𝗳𝗹𝗼𝘄 𝘁𝗿𝗮𝗻𝘀𝗳𝗲𝗿 𝗽𝘂𝗺𝗽

• Seal less design for handling pure, non crystallising, solids free liquids
• Available in PP, PVDF or Stainless Steel 316 materials
• Ideal for efficient, reliable drum or IBC transfer, including flammable chemicals
• Heavy duty construction with unique spiral shaft bearing for optimal vibration resistance
• Unique reversible 6 mm drive shaft doubles service life

🟧 𝗙 𝟰𝟮𝟲 – 𝗠𝗶𝘅𝗶𝗻𝗴 + 𝘁𝗿𝗮𝗻𝘀𝗳𝗲𝗿 𝗶𝗻 𝗼𝗻𝗲 𝗽𝘂𝗺𝗽

• Pump, mix or do both simultaneously with F 426
• Switchable mixing ports for in drum agitation or drum emptying
• Perfect when you need to mix, prevent settling, or blend emulsions
• Available in PP or Stainless Steel 316 materials
• Fitted with ceramic-oxide mechanical seal for handling pure, crystallising or solids laden media

💡 𝗜𝗻 𝘀𝗵𝗼𝗿𝘁: The F 424 is your tough, go to drum pump for reliable chemical transfer. The F 426 is designed for mixing low viscosity media and dispensing from the same container.

28/05/2026

It’s a wrap for CHEMUK 2026! 🎉

A huge thank you to everyone who visited the Flux Pumps stand and helped make this year’s show another great success. It was fantastic to connect with so many brilliant businesses across the industry and showcase our new FBM 4100 battery motor.

CHEMUK 2026 has been an amazing event, and we’re already looking forward to returning in the future!

To keep up to date with the latest from Flux Pumps UK, visit our website: www.flux-pumps.co.uk

19/05/2026

🚀 𝗧𝗼𝗺𝗼𝗿𝗿𝗼𝘄 𝘄𝗲’𝗿𝗲 𝗯𝗮𝗰𝗸 𝗮𝘁 𝗖𝗛𝗘𝗠𝗨𝗞 𝟮𝟬𝟮𝟲

We’re heading to the NEC Birmingham on Wednesday 20th & Thursday 21st May for CHEMUK 2026, the UK’s largest trade show dedicated to the chemical, process engineering and formulated product industries.

🔋 𝗦𝗲𝗲 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗶𝗻𝘁𝗲𝗹𝗹𝗶𝗴𝗲𝗻𝘁 𝗙𝗕𝗠 𝟰𝟭𝟬𝟬 𝗯𝗮𝘁𝘁𝗲𝗿𝘆 𝗺𝗼𝘁𝗼𝗿 𝗶𝗻 𝗮𝗰𝘁𝗶𝗼𝗻 - Powered by Einhell, designed for flexibility, mobility and the best performance in drum pump applications.

📍 𝗩𝗶𝘀𝗶𝘁 𝘂𝘀 𝗼𝗻 𝗦𝘁𝗮𝗻𝗱 𝗛𝟱𝟰: Come say hello, get hands on with our pumps and speak with our technical team about your chemical transfer challenges.

👉 𝗥𝗲𝗴𝗶𝘀𝘁𝗲𝗿 𝗳𝗼𝗿 𝗖𝗛𝗘𝗠𝗨𝗞 𝟮𝟬𝟮𝟲: https://register.visitcloud.com/survey/3i5jgesgxuwyh?actioncode=NTWO000127RJL&partner-contact=0ys4bpc3y4g1a&verifier=POGM3btADLHPW4Z7YTuAk0UIWSs

14/05/2026

𝗪𝗮𝗻𝘁 𝗽𝘂𝗺𝗽 𝘁𝗶𝗽𝘀, 𝗽𝗿𝗼𝗱𝘂𝗰𝘁 𝘄𝗮𝗹𝗸𝘁𝗵𝗿𝗼𝘂𝗴𝗵𝘀, 𝘁𝗿𝗼𝘂𝗯𝗹𝗲𝘀𝗵𝗼𝗼𝘁𝗶𝗻𝗴 𝗮𝗱𝘃𝗶𝗰𝗲 𝗮𝗻𝗱 𝘁𝗵𝗲 𝗹𝗮𝘁𝗲𝘀𝘁 𝘂𝗽𝗱𝗮𝘁𝗲𝘀 𝗳𝗿𝗼𝗺 𝗙𝗹𝘂𝘅 𝗣𝘂𝗺𝗽𝘀 𝗨𝗞? 💡🛠️🔔

Head over to our YouTube channel and hit Subscribe 👍 so you never miss a new video: Flux Pumps UK on YouTube (-pumps-uk). 🎥

https://www.youtube.com/-pumps-uk 🔗

12/05/2026

𝗖𝘂𝗿𝗶𝗼𝘂𝘀 𝗮𝗯𝗼𝘂𝘁 𝗵𝗼𝘄 𝗮 𝗽𝗻𝗲𝘂𝗺𝗮𝘁𝗶𝗰 𝗱𝗿𝘂𝗺 𝗽𝘂𝗺𝗽 𝘄𝗼𝗿𝗸𝘀? 🤔

A pneumatic drum pump operates by using compressed air to drive a vane motor, which in turn, powers the pump to transfer liquids from a drum or barrel. The rotational force from the motor is transmitted to the pump via the motor driver and mating pump coupling, ensuring efficient, safe fluid transfer every time. 💧

At Flux, we offer two types of drum pumps: 𝘤𝘦𝘯𝘵𝘳𝘪𝘧𝘶𝘨𝘢𝘭 𝘢𝘯𝘥 𝘱𝘳𝘰𝘨𝘳𝘦𝘴𝘴𝘪𝘷𝘦 𝘤𝘢𝘷𝘪𝘵𝘺. Our F 416 Ex air motors can reach speeds up to 10,000 RPM. When paired with an F 400 centrifugal pump, the air motor transfers drive directly to the pump shaft, spinning the impeller at the same high speed. This creates centrifugal force, efficiently moving liquid up the pump tube and out through the discharge port. These pumps deliver high flow rates with low viscosity fluids. 🚀

In contrast, pneumatic progressive cavity drum pumps are suitable for high viscosity fluids. They operate at much lower speeds, typically between 200 and 1,000 RPM, allowing time for slow moving fluids to flow into the pump cavity. If using the F 416 Ex air motor with our F 570 pump, a gearbox is required to reduce rotational speed.

Alternatively, for very high viscosity or adhesive media, you can use the high torque FPM series motor with an F 580 pump. As the FPM motors run at lower speeds, a gearbox is not required. You may need to throttle the air supply to achieve the ideal speed for your application (

07/05/2026

𝗟𝗼𝗼𝗸𝗶𝗻𝗴 𝗳𝗼𝗿 𝗮 𝗿𝗲𝗹𝗶𝗮𝗯𝗹𝗲, 𝗹𝗶𝗴𝗵𝘁𝘄𝗲𝗶𝗴𝗵𝘁 𝗱𝗿𝘂𝗺 𝗽𝘂𝗺𝗽 𝗳𝗼𝗿 𝗹𝗶𝗴𝗵𝘁-𝗱𝘂𝘁𝘆 𝗰𝗵𝗲𝗺𝗶𝗰𝗮𝗹 𝗱𝗶𝘀𝗽𝗲𝗻𝘀𝗶𝗻𝗴? 🧪

Meet the JuniorFlux F 300 series PP centrifugal drum pump, available in two designs:

• F 310 model with ceramic-oxide mechanical seal, for handling solids-entrained and crystallising media

• F 314 seal-less model with unique spiral shaft support bearing for pure, non-crystallising fluids

Each pump has a robust Hastelloy C driveshaft and ETFE impeller, engineered for long-lasting performance in corrosive environments, especially when handling acids, alkalis and oxidising liquids. ⚗️

The S1-rated FEM 3070 motor is suitable for continuous operation. Adjustable speed control lets you tailor flow rates for precise dispensing. Both 230 V and 110 V models are available. 🔧💧

Choose from immersion lengths of 500 mm, 700 mm, or 1,000 mm to suit a range of container sizes. 📏🛢️

When purity, durability and safety matter, the F 300 is your strategic advantage.

𝗕𝘂𝘆 𝘆𝗼𝘂𝗿 𝗝𝘂𝗻𝗶𝗼𝗿𝗙𝗹𝘂𝘅 𝗙 𝟯𝟭𝟬 𝗳𝗿𝗼𝗺 𝗼𝘂𝗿 𝘀𝗵𝗼𝗽 𝘁𝗼𝗱𝗮𝘆! 🛒✨

https://www.flux-pumps.co.uk/product/25l-drum-pump/

04/05/2026

👩‍🚒🔥 𝗧𝗼𝗱𝗮𝘆 𝗺𝗮𝗿𝗸𝘀 𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗙𝗶𝗿𝗲𝗳𝗶𝗴𝗵𝘁𝗲𝗿𝘀 𝗗𝗮𝘆, 𝗰𝗲𝗹𝗲𝗯𝗿𝗮𝘁𝗶𝗻𝗴 𝘁𝗵𝗲 𝘃𝗶𝘁𝗮𝗹 𝗿𝗼𝗹𝗲 𝗳𝗶𝗿𝗲𝗳𝗶𝗴𝗵𝘁𝗲𝗿𝘀 𝗽𝗹𝗮𝘆 𝗶𝗻 𝗸𝗲𝗲𝗽𝗶𝗻𝗴 𝗰𝗼𝗺𝗺𝘂𝗻𝗶𝘁𝗶𝗲𝘀 𝘀𝗮𝗳𝗲 𝗮𝗰𝗿𝗼𝘀𝘀 𝘁𝗵𝗲 𝗨𝗞 𝗮𝗻𝗱 𝗯𝗲𝘆𝗼𝗻𝗱.

🚒 Their professionalism and expertise are at the heart of community protection and emergency response.

🧯 Flux Pumps UK supports fire brigades with robust equipment built for demanding situations.

The Flux F 430 Drum Pump Kit is a plug-and-pump solution, designed for fire foam transfer and dispensing. Incorporating a class-leading, polypropylene F 430 pump with IP 55 totally-enclosed F 458 drive motor, this kit is engineered for tough applications in frontline emergency response situations.

💪 If you're looking to upgrade your emergency response kit, or need a robust pump system for handling foaming agents and fire suppression media, check out the Flux F 430 Drum Pump Kit.

https://www.flux-pumps.co.uk/product/flux-f430-drum-pump-kit-for-fire-foam/

30/04/2026

⚡ 𝗠𝗲𝗲𝘁 𝘁𝗵𝗲 𝗙𝗕𝗠 𝟰𝟭𝟬𝟬: 𝗧𝗵𝗲 𝗶𝗻𝘁𝗲𝗹𝗹𝗶𝗴𝗲𝗻𝘁 𝗰𝗼𝗿𝗱𝗹𝗲𝘀𝘀 𝗱𝗿𝘂𝗺 𝗽𝘂𝗺𝗽 𝗺𝗼𝘁𝗼𝗿 𝗳𝗼𝗿 𝗶𝗻𝗱𝘂𝘀𝘁𝗿𝗶𝗮𝗹 𝘂𝘀𝗲

The FBM 4100 packs smart technology into a compact, powerful cordless motor designed for maximum control and safety.

🔹 𝙀𝙞𝙣𝙝𝙚𝙡𝙡 𝙗𝙖𝙩𝙩𝙚𝙧𝙮 𝙢𝙖𝙣𝙖𝙜𝙚𝙢𝙚𝙣𝙩 𝙨𝙮𝙨𝙩𝙚𝙢
Compatible with all Einhell PXC series batteries and accessories.

🔹 𝙐𝙡𝙩𝙞𝙢𝙖𝙩𝙚 𝙧𝙪𝙣 𝙩𝙞𝙢𝙚𝙨
Pumps up to 5,000 litres on a single charge using 4 Ah batteries, or even more when using 6 Ah or 8 Ah batteries.

🔹 𝙎𝙚𝙡𝙚𝙘𝙩𝙖𝙗𝙡𝙚 𝙙𝙧𝙮 𝙧𝙪𝙣 𝙥𝙧𝙤𝙩𝙚𝙘𝙩𝙞𝙤𝙣 𝙖𝙣𝙙 𝙨𝙞𝙭 𝙗𝙖𝙩𝙘𝙝 𝙙𝙞𝙨𝙥𝙚𝙣𝙨𝙚 𝙥𝙧𝙚𝙨𝙚𝙩𝙨
If the container becomes empty, the motor stops automatically - protecting the pump and extending service life. Six integrated, programmable run timers can be used for accurate container filling.

🔹 𝙇𝙀𝘿 𝙬𝙤𝙧𝙠 𝙡𝙞𝙜𝙝𝙩
The integrated LED work light allows the operator to see how much liquid is left in the supply container.

🔹 𝙏𝙤𝙪𝙜𝙝 𝙝𝙤𝙪𝙨𝙞𝙣𝙜 𝙬𝙞𝙩𝙝 𝙗𝙖𝙩𝙩𝙚𝙧𝙮 𝙥𝙧𝙤𝙩𝙚𝙘𝙩𝙞𝙤𝙣
Extreme durability with true IP 24 ingress protection, or optional IP 44 protection for the toughest environments.

🔹 𝙋𝙍𝙊 𝙫𝙚𝙧𝙨𝙞𝙤𝙣 𝙬𝙞𝙩𝙝 𝙖𝙘𝙘𝙚𝙨𝙨𝙤𝙧𝙮 𝙞𝙣𝙩𝙚𝙧𝙛𝙖𝙘𝙚
Connect remote start-stop controls, level switches and flowmeters - covers all your process needs.

👉 Discover all the features of the new FBM 4100 cordless motor:

https://www.flux-pumps.co.uk/pump-by-type/battery-motor-for-drum-and-ibc-pumps/

27/04/2026

𝗜𝘁’𝘀 𝗡𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗕𝗮𝘁𝗵 𝗕𝗼𝗺𝗯 𝗗𝗮𝘆! 🛀🟣✨

Time to enjoy vibrant colours, fizz, fragrance and relaxation in every soak.

At Flux Pumps UK, we’re delighted to help make bath bomb production smoother for cosmetics manufacturers. Our drum pumps are designed to transfer ingredients safely and efficiently, supporting consistent quality and reducing waste in the process.

Curious about how we help your company create better products? Explore our cosmetics page for more.

https://www.flux-pumps.co.uk/pump-by-industry/cosmetics/

Address

Verwood
BH316YS

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Website

http://www.flux-pumps.co.uk/

Alerts

Be the first to know and let us send you an email when Flux Pumps posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Engineering Company in Verwood?