Wat zijn de openingstijden?

Maandag 08:15 - 17:00 Dinsdag 08:15 - 17:00 Woensdag 08:15 - 17:00 Donderdag 08:15 - 17:00 Vrijdag 09:00 - 17:00

Translas Europe

Name: Translas Europe
Address: Fahrenheitbaan 2, Nieuwegein, 3439MD, NL
Telephone: +31306047373

Startpagina
Nederland
Nieuwegein
Translas Europe

Bellen Routebeschrijving Website Contact opnemen met het bedrijf

Translas is a Dutch manufacturer of welding torches since 1960, founded “by welders, for welders” with a passion for innovation and new technologies.

We engineer innovative products that boast a distinctive design as well as quality and functionality. NL: Innovatieve producten voor de lasindustrie
Translas is Nederlands enige fabrikant van lastoortsen met ruim 50 jaar ervaring in ontwikkeling en productie van producten voor het lasproces. Translas brengt haar producten onder de merknamen Translas, Dutchweld en 4CE Force via een selectief dealernetwerk in meer dan 40 landen op de markt. EN: Innovative products for the welding industry
Translas is the only manufacturer in the Netherlands of welding torches with over 50 years of experience in the development and manufacture of products for the welding process. Translas markets its products under the brand names Translas, Dutchweld and 4CE Force via a selective dealer network in more than 40 countries.

28/10/2026

𝗪𝗲’𝗿𝗲 𝗯𝗿𝗶𝗻𝗴𝗶𝗻𝗴 𝗼𝘂𝗿 𝗠𝗮𝗲𝘀𝘁𝗿𝗼 𝗣𝘂𝘀𝗵𝗣𝘂𝗹𝗹 𝗿𝗮𝗻𝗴𝗲 𝘁𝗼 𝗠𝗲𝘁𝗮𝗹𝗠𝗮𝗱𝗿𝗶𝗱 𝘁𝗵𝗶𝘀 𝗡𝗼𝘃𝗲𝗺𝗯𝗲𝗿.

On November 4 and 5, 2026, we welcome you to booth 6C10. Two days to explore our products and talk welding with us.

Curious about our MAESTRO range?
We will be presenting our Maestro PushPull and Maestro Cobot PushPull. Bring your questions, tell us about your welding setup, and explore the range with our team.

And you can take an early look at something new. We will also share a sneak peek of our new TIG torch, the 10XT Astro. A first look, with room for your questions.

Our approach starts with "By Welders, For Welders." These conversations give us a chance to hear what matters to you, from the torch in your hand to the work on your floor.

Find our exhibitor page here:
https://www.advancedmanufacturingmadrid.com/en/exhibitors/translas-bv-244927/

You can also explore Translas at www.translas.com ahead of your visit.

We look forward to meeting in Madrid.

20/10/2026

𝗬𝗼𝘂𝗿 𝘄𝗲𝗹𝗱 𝗶𝘀 𝗼𝗻𝗹𝘆 𝗮𝘀 𝗴𝗼𝗼𝗱 𝗮𝘀 𝘁𝗵𝗲 𝗮𝗶𝗿 𝗮𝗿𝗼𝘂𝗻𝗱 𝗶𝘁.

Properly calibrated torch extraction isn't just about clean fumes, it's about consistent arc stability, better visibility, and welds you can trust.

Too weak? Fumes linger, quality drops.
Too strong? You risk disturbing your shielding gas and compromising the weld itself.

Get the balance right, and you protect your lungs, your workspace, and your results, all at once.

Calibrate it. Trust it. Weld it right.

💡 Using the Translas 8XE Extractor? Get it perfectly calibrated with the Translas Airflow Meter for accurate, reliable results every time. With up to 98% of welding fumes extracted straight from its source.

13/10/2026

𝗗𝗲𝘀𝗶𝗴𝗻𝗲𝗱 𝗳𝗼𝗿 𝗣𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻. 𝗕𝘂𝗶𝗹𝘁 𝗳𝗼𝗿 𝗖𝗼𝗯𝗼𝘁𝘀.

Every line of the Maestro 10XPC is purposeful - from its cobot-ready mounting design to the synchronized push-pull drive that keeps wire feed smooth and consistent at the torch tip. A high duty cycle keeps it running through demanding cycles, with a water-cooled version available for the toughest jobs.

Engineered in the Netherlands. By welders, for welders.

08/10/2026

𝗠𝗮𝗲𝘀𝘁𝗿𝗼 𝟭𝟬𝗫𝗣𝗖 - 𝗪𝗲𝗹𝗱𝗶𝗻𝗴 𝗶𝗻 𝗠𝗼𝘁𝗶𝗼𝗻

Smooth. Precise. Unstoppable. The 10XPC glides through every pass with push-pull control that puts power exactly where you need it - no strain, no hesitation, just clean welds from start to finish.

Welding together in perfect Harmony.

05/10/2026

𝗜𝗻𝘁𝗿𝗼𝗱𝘂𝗰𝗶𝗻𝗴 𝘁𝗵𝗲 𝗠𝗮𝗲𝘀𝘁𝗿𝗼 𝟭𝟬𝗫𝗣𝗖 𝗖𝗼𝗯𝗼𝘁

Engineered for cobot and semi-automatic welding, the Maestro 10XPC Push-Pull MIG Torch pairs an advanced swanneck design with intuitive handle-mounted controls for precise, on-the-go adjustments — built to push the boundaries of aluminum welding.

- Water cooled | CO2: 380 AMP | Mixed Gases: 350 AMP | Duty Cycle: 100%
- Wire sizes: 0.8–1.6mm aluminum/steel/stainless; 1.0–1.6mm flux core
- Wire speed: up to 22m/min
- Plug & Play compatibility (EUR, Lincoln, Tweco, Miller) — works with any welding machine

Collaborative welding, driven by push-pull control — power, without the strain.

29/09/2026

𝗔𝗖𝗘 𝗬𝗢𝗨𝗥 𝗡𝗘𝗫𝗧 𝗪𝗘𝗟𝗗

Every perfect weld starts with the right gear in your hands.

The 10XM Ace is built to help you nail it every time, Accuracy, Control and Endurance when it matters most. Available in both Water and Air cooled versions.

Whatever your setup, whatever your job, there's an Ace for you.

By welders. For welders.

18/09/2026

Sneak peek behind the scenes! 🤫

Before any product leaves our floor, it undergoes rigorous, uncompromising testing. We push every feature to its absolute limit because "good enough" simply doesn't cut it, we are fully committed to delivering quality welders can rely on every single time.

Check out this short clip of our team putting our newest, unreleased product through its paces.

We can't wait to share the final result with you. Stay tuned! 👇

14/09/2026

𝗔𝗹𝗹 𝗹𝗶𝗻𝗲𝗱 𝘂𝗽 𝗮𝗻𝗱 𝗿𝗲𝗮𝗱𝘆 𝘁𝗼 𝗴𝗼!

Another batch of 10XM ACE air-cooled MIG torches is about to go out the door. Ready for welders around the world to ACE their next weld.

Also want to level up your MIG welding game?
Visit our website 🌐www.translas.com
Or send an email to 📧[email protected]

09/09/2026

"𝟵𝟴% 𝗰𝗮𝗽𝘁𝘂𝗿𝗲 𝗿𝗮𝘁𝗲. 𝗡𝗶𝗰𝗲 𝗽𝗲𝗿𝗰𝗲𝗻𝘁𝗮𝗴𝗲. 𝗕𝘂𝘁 𝘄𝗵𝗮𝘁 𝗱𝗼𝗲𝘀 𝗶𝘁 𝗮𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗺𝗲𝗮𝗻?"

98% capture rate. It sounds impressive. And it is.

But when it comes to welding fume extraction, we believe the key question isn't just whether you can claim 98%, but above all: how was that 98% arrived at?

At Translas, we believe claims like this need to be backed up with facts and measurements.
That's why we developed our solution in collaboration with TNO and researched it extensively. Not just to see what's technically possible, but especially to establish what actually happens when you remove welding fume directly at the source.

And that's exactly where the difference lies for us.

A number is interesting.
The evidence behind it is what really matters.
Because in the end, it's not about a percentage in a brochure.

It's about how much welding fume you can actually remove at the source, and by doing so prevent it from spreading across the work floor.
For us, 98% is therefore more than a marketing claim.
It's a result we can substantiate.

The reality behind the 98%? It's measurable.

Adres

Fahrenheitbaan 2
Nieuwegein
3439MD

Openingstijden

Maandag	08:15 - 17:00
Dinsdag	08:15 - 17:00
Woensdag	08:15 - 17:00
Donderdag	08:15 - 17:00
Vrijdag	09:00 - 17:00

Telefoon

+31306047373

Website

http://www.translas.com/en/home

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer Translas Europe nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Contact Opnemen Met Het Bedrijf

Stuur een bericht naar Translas Europe:

Andere Industrieel bedrijf in Nieuwegein

Alles Zien