Electrex

09/10/2026

A Electrex está presente no Fundão, a acompanhar mais um evento do nosso distribuidor oficial Beiratools Lda.

Uma oportunidade para conhecer de perto as nossas soluções de soldadura, corte e laser, assistir a demonstrações ao vivo e esclarecer questões diretamente com as nossas equipas comercial e técnica.

Continuamos a trabalhar lado a lado com os nossos distribuidores, reforçando a proximidade com os profissionais e a indústria.

Esperamos por si!

08/10/2026

«Contaremos con un equipo técnico disponible para resolver dudas, analizar aplicaciones concretas y presentar las soluciones Electrex, tanto en el ámbito de los productos como de los servicios. Queremos ofrecer a todos nuestros visitantes una experiencia práctica, cercana y técnicamente relevante.» - Nelson Silva, Sales Manager para España

Hemos entrevistado a Nelson Silva, quien explica por qué la participación de Electrex en Advanced Manufacturing ES (MetalMadrid) será un punto de encuentro para ver en funcionamiento nuestras soluciones de láser, MIG, TIG y MMA, analizar aplicaciones concretas con nuestros equipos técnico y comercial, descubrir nuevas líneas de producto y mucho más.

Entrevista completa en el primer comentario ↓

¿Qué tecnología te gustaría ver en directo en Madrid: láser, MIG, TIG o MMA?

06/10/2026

Laser welding is increasingly becoming a valuable solution for aluminium fabrication.

Its highly concentrated energy input enables high welding speeds, low overall heat input and a narrow heat-affected zone, helping to minimise thermal distortion. When properly applied to the appropriate aluminium alloy and joint configuration, laser welding can also contribute to clean, precise and highly repeatable welds, while reducing the amount of post-weld finishing required.

The performance of laser welding depends not only on the equipment, but also on correct process definition, parameter optimisation, operator training and the consistent availability of the appropriate consumables. Through our partnership with our authorised distributor Maurício & C.A., Lda., customers benefit from application support, commissioning, training, consumables supply and continued technical assistance, helping to ensure process stability, repeatability and consistent welding results with Electrex industrial laser welding systems.

Thank you Mauricio & Ca, Lda for your continued trust!

29/09/2026

Volvemos a Madrid. ¡Y tenemos mucho que compartir!

Los próximos 4 y 5 de noviembre, Electrex estará presente en Advanced Manufacturing 2026, uno de los principales puntos de encuentro para la industria y la innovación en España.

Nuestra participación supone un paso más en nuestra apuesta por el mercado español: reforzar la presencia de Electrex, estar más cerca de la industria y seguir consolidando la relación con nuestros distribuidores.

Presentaremos nuestras soluciones de soldadura y láser industrial, nuevas líneas de producto y demostraciones en vivo, con un equipo preparado para hablar de tecnología, productividad y de los retos reales de cada aplicación.

📅 4–5 NOVIEMBRE 2026
📍 IFEMA Madrid
📌 Pabellón 6 | Stand 6B22-B24

¿Nos vemos en Madrid?

04/09/2026

Parabéns à equipa Macafer por mais um excelente resultado! 👏 É um orgulho contar com parceiros que diariamente levam as soluções Electrex aos profissionais da indústria.

Obrigado pela confiança e pela parceria! ⚡

Na passada 4a feira vendemos 15 equipamentos Electrex, há dias assim! Nesta imagem seguem 4 equipamentos bem como os respetivos acessórios!
Agradecemos a confiança dos nossos clientes..

20/08/2026

MECAPULSE vs. CONVENTIONAL MIG | Pipe MIG Welding Comparison

How does MecaPulse perform when welding a joint with a significant gap?

In this test, we compared conventional MIG welding with the Electrex MecaPulse process under the same joint conditions:
• Thickness: 8 mm
• Gap: 4 mm
• Angle: 60°
• Bevel: 2 mm

With MecaPulse, the test showed:
→ 25% smaller Heat Affected Zone
→ Improved gap bridging
→ More arc control
→ Stable pe*******on

Unlike electronic pulsed MIG, MecaPulse works by dynamically controlling the wire feed, alternating between forward motion and stop intervals. The objective is to provide a simple and cost-effective approach to achieving greater control over the welding process while reducing its thermal impact.

MecaPulse. Pulsed performance. Lower cost.

Available across the Electrex MIG BASIC Series. Also available on the DIGIT II and LTRONIC SYNERGIC™ Series for non-European markets.

08/07/2026

⚡ La soldadura profesional, más fácil que nunca.

Electrex MONOMIG 200 C SYN combina portabilidad, facilidad de uso y rendimiento profesional en un único equipo.

✔️ Regulación manual o sinérgica para adaptarse a tu forma de trabajar.
✔️ Soldadura MIG/MAG, MIG sin gas, MMA y LIFTIG en corriente continua.
✔️ Devanadora de hilo integrada.
✔️ Diseño ligero y fácil de transportar, ideal para el taller o para trabajos en obra.

La solución perfecta para soldar donde la necesites. ⚡

07/07/2026

A better welding experience starts with a better interface.

At Electrex, we believe innovation is not only about welding performance, but also about how operators interact with their equipment every day.

The LCD interface of our latest three-phase MIG SYN range has been completely redesigned to deliver a clearer, more intuitive and more efficient user experience. With modern universal icons, simplified navigation and faster access to key functions, operators can configure the machine more quickly and focus on what matters most: welding.

This update reflects our ongoing commitment to developing welding technology that combines performance, usability and productivity.

And this is just the beginning. Stay tuned for more exciting innovations and new features coming soon to the Electrex three-phase MIG SYN range.

06/07/2026

🏁 Electrex Racing Team Update!

🥇 On 30 May, at Viana do Alentejo, Electrex Racing Team drivers Rui Pereira and Miguel Antunes were among the fastest competitors throughout the day, securing an outstanding overall victory.

🏆 The fourth round of the TH Clothes Super SSV Trophy 2026, held on 28 June in Elvas, was marked by several mechanical issues. Despite the setbacks, the team fought back to claim 1st place in the Hobby category.

After the summer break, the next challenge awaits in Barcelos on 3 October. We look forward to getting back on track! 💪🏁

06/07/2026

⚡ ELECTREX TIG 160 HF

Calidad de soldadura Electrex al alcance de todos.

Ligera, compacta y fácil de utilizar, la TIG 160 HF incorpora cebado por alta frecuencia (HF) para un inicio del arco sin contacto, ofreciendo una soldadura limpia, precisa y fiable.

✅ Cebado por alta frecuencia (HF)
✅ TIG DC y MMA
✅ Compacta y portátil
✅ Excelente relación calidad-precio

La solución ideal para quienes buscan la calidad y la fiabilidad de Electrex en un equipo accesible y preparado para el trabajo diario. 💪