IIA Field Services, LLC

05/30/2026

NOW HIRING: FULL-TIME NDE ASSISTANTS
Abilene, TX & West Texas / Permian Basin

IIA Field Services is seeking dependable, safety-minded individuals looking to build a career in industrial inspection. This entry-level position offers the opportunity to work alongside experienced

NDT professionals and gain valuable field experience in a growing industry.
Applicants must currently reside in the Abilene or West Texas area. Relocation assistance is not available.

Apply today to learn more.
https://iiafieldservices.com/careers/

05/18/2026

Positive Material Identification (PMI) is often discussed as a compliance requirement, but in practice, it’s a reliability and risk-management tool.

When alloy materials are installed incorrectly — whether during fabrication, maintenance, or turnaround work — the consequences may not appear immediately. The issue usually surfaces later through corrosion, cracking, or premature component failure under service conditions.

That’s why PMI matters in high-risk industrial environments. Methods like X-ray Fluorescence (XRF) and Optical Emission Spectroscopy (OES) help verify material chemistry before assets are returned to service, supporting mechanical integrity programs and documented quality assurance processes.

For plant managers, engineers, and inspection teams, the value of PMI is straightforward: reducing uncertainty about what is actually installed in critical systems.

We recently published a practical overview of why PMI plays an important role in safety, compliance, and long-term asset reliability across industrial operations.

https://iiafieldservices.com/why-positive-material-identification-is-critical/

05/09/2026

In the field, “good enough” welding can become a very expensive problem. A small crack. Incomplete fusion. Porosity that gets overlooked during fabrication.

At first, it may not seem critical. The job gets signed off, production moves forward, and schedules stay on track.

But under real operating conditions—pressure, vibration, heat cycles, load stress—small weld defects can turn into leaks, failures, shutdowns, and serious safety risks.

That’s why inspection standards matter.

At IIA Field Services, we’ve seen firsthand what happens when quality slips or inspections are rushed. Our job isn’t to slow projects down—it’s to help prevent avoidable failures before they impact people, production, or profitability.

Because in this industry, “good enough” rarely stays good enough for long.
https://iiafieldservices.com/

04/24/2026

What does a Level II NDT Technician actually do day-to-day? It’s more than running tests.

Out in the field, Level II techs are:
• Setting up and calibrating equipment for methods like UT, MT, PT, and RT
• Interpreting results—not just collecting data
• Making judgment calls that impact safety, uptime, and compliance
• Working in real-world conditions—heat, wind, tight spaces, and active job sites
• Documenting findings clearly so engineers and operators can act with confidence

This role carries real responsibility. You’re often the last line of defense between a minor issue and a major failure.

It also requires more than experience:
✔️ Certifications (ASNT Level II or equivalent)
✔️ Strong attention to detail
✔️ The ability to work independently in the field
✔️ A mindset focused on safety and accuracy

For the right person, it’s a career that builds skill, trust, and respect over time. If you’re looking for work that matters—this is it.

04/16/2026

We’re hiring Full-Time NDE Assistants in Abilene and throughout West Texas.

Local candidates only — must currently live in the West Texas / Abilene area. No sponsorships available.

This isn’t a desk job.
It’s early mornings, job sites, and hands-on work that matters.

If you:
– Show up on time
– Take safety seriously
– Want to learn a skilled trade

There’s a place for you here. Start as an assistant. Build a career in NDT.

Apply today. https://iiafieldservices.com/careers/

04/10/2026

Skipping NDT doesn’t save money. It just delays the bill.

We’ve seen it play out too many times in the field—
• A small indication goes unchecked
• A weld defect gets missed
• An inspection gets pushed to “next shutdown”

Then comes the real cost:
Unplanned downtime.
Production losses.
Emergency repairs under pressure.
And in the worst cases—safety incidents and regulatory exposure.

Non-Destructive Testing (NDT) isn’t a line item to cut. It’s a control measure that protects your people, your assets, and your schedule.

The reality? The cost of inspection is predictable. The cost of failure never is.
https://iiafieldservices.com

04/05/2026

Easter is a time of renewal, hope, and fresh perspective—a reminder that even after the hardest seasons, new life and new opportunities are always ahead.

At IIA Field Services, we’re grateful for the people we work alongside every day and the trust placed in us to help keep operations safe and strong.

Wishing you and your team a blessed Easter. May it be filled with peace, time well spent with family, and a renewed sense of purpose for the work ahead.

03/30/2026

Hardness testing doesn’t get much attention—but it should. In the field, it’s one of the fastest ways to confirm whether a material will actually perform the way it was intended. Not on paper. In service.

A quick hardness check can help verify:
• Proper heat treatment
• Material consistency
• Changes from service conditions (like work hardening or thermal exposure)

It’s also one of the few methods that gives immediate insight without cutting, removing, or shutting anything down.

For operations and maintenance teams, that matters. Because the question isn’t just what was installed—it’s what condition is it in today.

We put together a short breakdown of why hardness testing plays such a critical role in both material selection and ongoing maintenance.

Read more: https://iiafieldservices.com/why-hardness-testing-is-critical-in-material-selection-and-maintenance/

Curious how others are using hardness testing in their inspection programs—especially in high-temp or high-wear environments.

03/10/2026

Progress Update: IIA Field Services is Moving to Gardendale!

Exciting things are happening at IIA Field Services! Construction is moving quickly on our new facility in Gardendale, Texas, and we’re getting closer every day to opening the doors.

Over the past several weeks, our team has been working hard to bring this new space to life — from the steel frame going up to the exterior panels, interior framing, and shop buildout. This new location will give us the room we need to continue supporting our clients across the Permian Basin and beyond.

We’re aiming to be fully operational in about a month, and we’re looking forward to serving our customers from this new home.

📍 New Location
6200 E Cecelia Street
Gardendale, TX 79758

Stay tuned for more updates as we get closer to move-in day. We’re excited about what this next chapter means for our team and the work ahead.

03/06/2026

NOW HIRING: Level II NDE Technicians – West Texas

Looking for your next opportunity in West Texas? We’re hiring Level II NDE Technicians to join a growing team with strong pay, steady work, and opportunities to advance.

🔧 What We Offer:
✅ Competitive pay based on certifications & experience
✅ Consistent work in booming West Texas
✅ Supportive team and career growth opportunities

🔍 We’re Looking For Technicians With:
• Level II certification (RT, UT, MT, PT, or VT preferred)
• Strong safety mindset
• Ability to work in field environments

📍 Location: West Texas / Permian Basin

If you're ready to work with a team that values your expertise and keeps you working, we want to hear from you.

👉 Apply today!
https://iiafieldservices.com/careers/

A Future with IIA Field Services IIA Field Services is Growing We are Hiring for the Following Positions POSITION: LEVEL II NDE TECHNICIAN Job Duties: Follow all safety guidelines as required by IIA Field Services HSE Manual. Adhere to Rules and Regulations of Radioactive Materials set forth by the....