Diamax Industries Inc.

Diamax Industries Inc. Diamax utilizes cutting edge technology and innovation to engineer diamond tools that give maximum p

08/28/2026

Category 5 performance with hurricane durability. Built for fabricators who demand speed without sacrificing value, the Hurricane Silent Core Blade delivers aggressive cutting performance across granite, quartzite, and engineered stone.

⚡ Category 5 cutting speeds
💎 High-performance, cost-effective design
💧 Optimized gullets for efficient slurry removal
🔇 Silent core for smoother cutting performance

When production matters, let Hurricane do the heavy lifting.

08/26/2026

Introducing the NEW Cyclone Copper Velcro Disk. Engineered to bridge the gap between cutting and polishing, aggressively removing material from imperfect edges while creating a smoother transition into resin polishing.

⚡ 8mm copper hybrid bond for aggressive stock removal
💎 Textured surface opens diamonds quickly for instant bite
✨ Rounded edges for smoother entry and cleaner polish
🔄 Smooth transition from saw cut to resin polishing
🚀 Boosts polishing speed and consistency
🛠️ Available in 5" & 6" sizes

For faster prep. Smoother transitions. More consistent polishing.

👉diamaxinc.com/en/productslist/cyclone-copper-hybrid-velcro-disk/

08/24/2026

The Cyclone QZT was engineered specifically for quartzite, delivering the speed, durability, and edge retention fabricators need to tackle one of the industry's toughest materials.

⛰️ Built specifically for quartzite
💎 Non-glazing bond stays sharp longer
📐 Maintains square, accurate miter edges
⚡ Fast, consistent cutting with less downtime

Don't let quartzite slow production. Cut it with confidence.

The next generation of fabrication doesn't wait for the old way.At Diamax, innovation means more than creating something...
08/20/2026

The next generation of fabrication doesn't wait for the old way.

At Diamax, innovation means more than creating something new. It means finding a faster cut, a cleaner edge, a longer-lasting bond, and a better way to get the job done.

From the shop floor to the next generation of tooling, we're always pushing fabrication forward.

30 Years in Stone. Still moving forward.

08/17/2026

The Super Cyclone Porcelain Blade combines a thinner segment with premium diamond technology to produce faster, cleaner cuts on porcelain, Dekton®, quartz, and granite.

💎 Engineered for Dekton performance
⚡ 15% thinner segment for faster cutting
✨ Factory-dressed and ready to perform
📐 Reinforced core for clean miter edges

Contact your Diamax rep to get your Super Cyclone Porcelain Blade.
>>>diamaxinc.com/en/productslist/super-cyclone-porcelain-blade/

08/13/2026

Introducing the NEW Cyclone Marble Blade. Engineered specifically for clean, straight cuts and precise miters in marble. A specialized marble bond and higher concentration of smaller grit diamonds help deliver chip-free cutting, while the silent core significantly reduces noise.

💎 Specialized marble bond
✨ Higher concentration of smaller grit diamonds for clean, chip-free cuts
🔇 Silent core reduces noise significantly
📐 Clean, straight miter cuts
🛠️ 14", 16" & 18" sizes
💧 Wet use only

Learn More: diamaxinc.com/en/productslist/cyclone-marble-silent-core-blade/

08/11/2026

When you're cutting Dekton, Porcelain, and today's toughest ultra-compact materials, precision isn't optional. The Cyclone Ultra Blade is engineered to deliver fast, clean cuts with minimal maintenance—so you can spend more time cutting and less time dressing.

💎 Engineered for ultra-compact materials
⚡ Fast, clean straight & miter cuts
🔇 Silent steel core for smoother performance
🛠️ Minimal upkeep with limited dressing

When every cut matters, trust the blade built to handle the industry's toughest materials.

👉diamaxinc.com/en/productslist/cyclone-ultra/

08/10/2026

Two systems. One high-gloss finish. The Typhoon ES White Polishing Systems bring flexible performance and high-polish results to engineered stone, granite and quartzite.

Choose the 3-Step System for a faster path to a high-gloss finish—or the 7-Step System for a complete progression from initial polish to final finish.

✨ Clover tread design traps water for a high polish
⚡ Flexible pads for better surface contact
🛡️ Rounded edges help prevent accidental scratches
💧 Wet polishing
🛠️ 4" pads with 3mm resin thickness
⚙️ 4,000 RPMs

3 steps or 7 steps. Your finish. Your process.

Put Typhoon ES White to work. Contact your Diamax rep to get yours today.

>diamaxinc.com/en/productslist/typhoon-es-white-3-step-polishing-system/
>diamaxinc.com/en/productslist/typhoon-es-white-7-step-polishing-system/

08/05/2026

The Cyclone CNC Core Bit is engineered for demanding CNC fabrication with new diamond technology and a T-segment design that helps increase bit life and minimize segment loss.

⚙️ New diamond technology for extended life
💎 T-segment design helps minimize segment loss
💧 Larger water holes help prevent blowouts
🛠️ Designed for CNC machines
📏 Available in 10+ sizes
🚀 Up to 2,300 RPMs

Built to drill smarter. Built to keep your CNC moving.

07/31/2026

The Hurricane WE Series is engineered to deliver dependable wet polishing performance across the toughest materials—combining durability, flexibility, and a polished finish at an exceptional value.

💎 Built for engineered stone, granite & quartzite
💪 Durable 3mm resin construction
⚡ Flexible W Series tread design
✨ 7 grits + 2 buffs for a complete finish
🛠️ Available in 3", 4" & 5" sizes

When you need versatility without sacrificing performance—run Hurricane.

Address

949 W Marietta Street NW, Ste X100
Atlanta, GA
30318

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+14048173232

Website

Alerts

Be the first to know and let us send you an email when Diamax Industries Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share