Hood Time Welding LLC

Hood Time Welding LLC I am a welder/fabricator with 27 years experience.

Getting there on this railing job. All 14 straight pieces are done ranging in size from 32"-110". I have two single gate...
06/07/2026

Getting there on this railing job. All 14 straight pieces are done ranging in size from 32"-110". I have two single gates and one double gate left. Plus 3 railings for stairs. I've put in a lot of work to get this far.

Quick little job today and then I kept working on the big railing job. The idler wheels on this deck started to break of...
06/02/2026

Quick little job today and then I kept working on the big railing job. The idler wheels on this deck started to break off. Got them straightened out and rewelded.

Working on another big railing job. I've got 4 sections done and only 17 more to go including gates. Sure is keeping me ...
05/28/2026

Working on another big railing job. I've got 4 sections done and only 17 more to go including gates. Sure is keeping me busy.

Quick deck repair today. I of course forgot to take before pictures on some of it. I won't be posting much in the next c...
05/19/2026

Quick deck repair today. I of course forgot to take before pictures on some of it. I won't be posting much in the next couple of weeks because I'm getting started on a big job. Don't forget about me.😊

Another cool little project done. Support for a granite countertop peninsula. It was a collaboration between myself and ...
05/18/2026

Another cool little project done. Support for a granite countertop peninsula. It was a collaboration between myself and the customer. I think it looks great.

Another project done. This came to me with only one leg still attached to the top two rings and another attached by a fi...
05/10/2026

Another project done. This came to me with only one leg still attached to the top two rings and another attached by a finger nail to the bottom. The bottom ring was shot so I improvised a replacement.

I know I already posted this but I wanted you to see the finished project. So the total cost for the customer was just u...
04/28/2026

I know I already posted this but I wanted you to see the finished project. So the total cost for the customer was just under $750 if you were wondering. That included everything including installing except the paint and the 2by4s.

Rebar railing install started. Not done all the way. I have one section I screwed up measuring but that's on me. Trying ...
04/16/2026

Rebar railing install started. Not done all the way. I have one section I screwed up measuring but that's on me. Trying to measure logs with knots is not easy. But 4 out of 5 is pretty good. You can see where I had to notch for the railing to sit flat against each one.

The customer asked for a railing. This is what I came up with. A railing made with rebar topped with a 2+4(per his reque...
04/09/2026

The customer asked for a railing. This is what I came up with. A railing made with rebar topped with a 2+4(per his request) not attached just for illustration. This is one of 5 sections needed. I'll post when I install.

Address

65 Interstate Parkway
Bradford, PA
16701

Website

Alerts

Be the first to know and let us send you an email when Hood Time Welding LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hood Time Welding LLC:

Shortcuts

Share

Category