10/29/2026
A commercial kitchen puts flooring to the test every day, with frequent washdowns, chemical exposure, thermal shock, and constant foot traffic. But often, the real nightmare starts before the floor is even installed: a badly deteriorated, unlevel concrete substrate.
For this commercial kitchen project in Murfreesboro, Tennessee, the original concrete was severely uneven, pitted, and rough.
Traditional thin coatings or tile would have required extensive, costly leveling underlayments to fix a floor in this condition. Instead, the 𝐇𝐞𝐫𝐦𝐞𝐭𝐢𝐜™ 𝟒.𝟖𝐒 𝐔𝐫𝐞𝐭𝐡𝐚𝐧𝐞 𝐂𝐞𝐦𝐞𝐧𝐭 𝐅𝐥𝐨𝐨𝐫𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦 was selected.
Because this specialty three-component slurry can be applied by gauge/screed rake to yield a heavy 1/4” to 5/16” thickness, it acts as its own self-leveling agent—filling deep concrete irregularities, bonding to the damp substrate, and smoothing out the slab in a single application phase.
Here is why this system is engineered for high-performance commercial environments:
• Substrate Correction & Speed: Naturally levels out damaged concrete and accepts foot traffic in as little as 4 to 12 hours, keeping fast-track construction schedules on time.
• Extreme Durability: Boasts a compressive strength of 12,800 psi and a Shore D hardness of 80-85, meaning it easily withstands heavy wheeled traffic and impact.
• Zero Grout Joints to Fail: The 100% seamless construction replaces high-maintenance tile, leaving no failed joints where bacteria can hide. It will not support bacterial growth and meets strict USDA, FDA, and CFIA standards.
• Thermal & Chemical Defense: Unaffected by forced hot steam up to 230°F (110°C) and highly resistant to commercial kitchen fats, oils, sugars, and harsh industrial cleaning chemicals.
• Environmental Safety: Water-based, zero VOC, completely odorless during installation
In commercial food service, flooring performance isn't just about the top layer—it's about how the system handles the harsh realities of the job site from the substrate up to protect your project budget and long-term operations.
Project completed by TKO Concrete Coatings
Kerry Pharr