Elmridge Jet Apparatus

10/30/2026

Steam and Compressed Gas Ejectors for Industrial Applications

ELMRIDGE Gas-Jet Ejectors and Exhausters use steam, compressed air, or other pressurized gas as the Motive fluid, and pump other gases or v***rs. The high velocity jet of gas or v***r from the ejector nozzle creates an associated pressure drop or vacuum, and causes the suction gas or v***r to be entrained and pumped. ‘TGG Series‘ Gas-Jet Ejectors are optimized to achieve the best combination of Suction Capacity and available vacuum using the least amount of Motive Steam/Compressed Gas.

‘TGK Series‘ Gas-Jet Ejectors are optimized to achieve the best obtainable vacuum using the least amount of Steam only. Gas-Jet Ejectors and Exhausters are typically available from stock in Bronze/Brass, Cast Iron/Carbon Steel, 316L Stainless Steel, and all Carbon Steel construction. Other materials are available upon request. Threaded or Flanged connections are standard on TGG Series, and flanged Suction and Discharge with threaded Motive connection are standard on TGK Series.

Contact Us Today Regarding Your Eductor Applications. We Have Offices in The United States and Canada: https://elmridgejetapparatus.com/pumping-gases-eductors/

ELMRIDGE Liqui-Jet Eductors, Exhausters, and Gas & Chemical Infusers are typically used where smaller volumes of gas are to be pumped and where liquid under pressure is abundant. ELMRIDGE Gas-Jet Ejectors and Exhausters can be used to evacuate tanks and prime pumps.

10/23/2026

Maximize Thermal Efficiency with Elmridge 'SE Series' Steam Spargers

ELMRIDGE ‘SE Series‘ Gas-Jet Steam Spargers are ‘in-tank’ direct contact heating devices used for directly injecting steam into vented process vessels. The venturi design of these Steam Spargers provides superior injection performance due to the capability of the Sparger to aggressively circulate tank contents, reducing or eliminating thermal gradients.

‘SE Series‘ Gas-Jet Steam Spargers are also extremely thermally efficient as the heat content of the incoming steam is completely transferred to the tank contents.

Standard materials of construction are Iron, 316 Stainless Steel, and Alloy 20. Other materials are available upon request. Threaded, Flanged, or Socket Weld Connections (except Cast Iron).

Speak to an Eductor Specialist Today. Large Inventory of Eductors. Fast & Friendly Service, Plus Get Same Day Shipments. We Service The United States and Canada. Learn more at https://elmridgejetapparatus.com/tank-mixing-heating-ejectors/

10/17/2026

Pumping Liquids Using Motive Steam / Compressed Gas

ELMRIDGE Gas-Jet Siphons use primarily steam as the Motive fluid, and operate on the venturi principle to pump liquids or slurries. Steam is expanded through a nozzle at high velocity, creating a vacuum, causing the suction liquid to be pumped. TGL SERIES GAS-JET SIPHONS are optimized to achieve the best combination of Suction Capacity and available Suction Lift using the least amount of Motive Steam. Gas-Jet Siphons are typically available from stock in Bronze/Brass, Cast Iron/Steel, 316L Stainless Steel, and all Carbon Steel construction. Other materials are available upon request. Threaded or Flanged connections are standard.

Gas-Jet Siphons can also be used with compressed non-condensable gases (ie. Compressed air), to pump relatively very small volumes of liquids or slurries. Contact our technical staff for details.

Contact Us Today Regarding Your Eductor Applications. We Have Offices in The United States and Canada: https://elmridgejetapparatus.com/pumping-liquids-eductors/

ELMRIDGE Liqui-Jet Eductors use water or other liquids under pressure as the Motive fluid, and operate on the venturi principle to pump other liquids or slurries. ELMRIDGE Gas-Jet Siphons are typically used for pumping liquids or slurries when Motive Steam is available.

10/09/2026

How Eductors Work: Converting Fluid Pressure into Pumping Power

‘Jet-Apparatus’ is a term typically used to identify a piece of equipment, to perform work on, and in direct contact with, another medium in a defined and predictable way.

The main principle governing the operation of typical Jet-Apparatus is Conservation of Momentum. When fluid pressure (potential energy) is converted into fluid velocity (kinetic energy) by means of a constricting or***ce (i.e. Converging Nozzle), there exists an associated useful pressure drop. For a constant primary fluid mass flowrate and constricting or***ce, this pressure drop is a function of the primary fluid pressure.

Jet Apparatus uses this pressure drop to entrain a secondary medium (fluid or granular solid), within a chamber (i.e. Suction Chamber) that is at the pressure of the secondary medium, for the purpose of pumping, mixing, evacuating, etc.

The suction capacity of a specific device is typically a function of the primary fluid velocity and mass flowrate [as well as properties of the suction material and downstream pressure]. Once entrained, the velocity of the mixture of primary and secondary media (kinetic energy), is converted back into pressure energy (potential), by means of a volumetric divergence (i.e. Diffuser).

Available discharge pressure is typically a function of the diffuser velocity and total mass flowrate. The three main components of Jet-Apparatus (Converging Nozzle, Suction Chamber, Diffuser), are rigidly fixed in specific relation to each other, hence there are no moving parts – one of the main advantages of this type of device.

We Offer The Latest Technology In Eductor Applications. Call Today For More Information or Visit https://elmridgejetapparatus.com/

10/02/2026

High-Quality Eductors & Ejectors Engineered to Your Specs

ELMRIDGE® designs and manufactures hundreds of different styles and models of Ejectors, Eductors, Exhausters etc., commonly referred to as ‘Jet-Apparatus’, in virtually any machinable, moldable, or castable material.

Our years of experience and unparalleled customer service have enabled us to develop a customer base that includes all types of industry; from Water and Wastewater Treatment to Mining, Chemical, and Petrochemical production.

Most standard items are generally in stock for immediate delivery, and special designs, configurations, and materials can be rapidly provided.

Our promise to you is simple: uncompromising quality, competitive pricing, and lightning-fast delivery.

Speak to an Eductor Specialist Today. Large Inventory of Eductors. Fast & Friendly Service, Plus Get Same Day Shipments. We Service The United States and Canada. Learn more at https://elmridgejetapparatus.com/

ELMRIDGE designs and manufacturers Industrial Eductors. Including Liqui-Jet Eductors, Line-Type Heaters, Exhausters, Mixing Eductors, Gas-Jet Ejectors, Exhausters, Siphons, Solids Eductors and Steam Spargers.

09/18/2026

How Jet-Apparatus Eductors Drive High-Volume Tank Circulation

ELMRIDGE ‘ME Series‘ Liqui-Jet Mixing Eductors vigorously and efficiently circulate the liquid contents of tanks without powered impellers or other insertion-type rotating mechanical devices.

ELMRIDGE ‘ME SERIES‘ Liqui-Jet Mixing Eductors operate on the same principle as our standard line of liquid-powered Jet-Apparatus. Liquid is pumped through the Eductor nozzle, emerging at a relatively high velocity, creating a localized zone of lower pressure. Tank contents are drawn to this lower pressure zone, where the momentum of the motive liquid is transferred to the tank liquid, causing the tank liquid to be ‘pumped’ and circulated.

For every gallon of liquid pumped through the Eductor nozzle, up to five gallons of liquid is circulated.

Note that the Eductors can actually be ‘aimed’ at specific areas in the vessel. Standard materials of construction are Glass Reinforced Polypropylene, PVDF, PVC, CPVC, Teflon®, Cast Iron, 316 Stainless Steel, Alloy 20 and Hastelloy C®. Other materials are available upon request Threaded, flanged or socket weld connections (except Cast Iron).

Speak to an Eductor Specialist Today. Large Inventory of Eductors. Fast & Friendly Service, Plus Get Same Day Shipments. We Service The United States and Canada. Learn more at https://elmridgejetapparatus.com/tank-mixing-heating-ejectors/

ELMRIDGE Liqui-Jet Line-Type Heaters are a highly efficient and economical means of heating small to large volumes of liquids 'in-line.' ELMRIDGE Gas-Jet Steam Spargers are 'in-tank' direct contact heating devices used for directly injecting steam into vented process vessels.

09/11/2026

Need to Convey Tough Slurries? Meet the Elmridge Liqui-Jet Series

ELMRIDGE Liqui-Jet Solids Eductors use liquid under pressure as the motive fluid, and effectively pump or convey granular solids or slurries. Inlet liquid pressures for this type of eductor are typically in a range from 10 to 100 psig. Solids flowrate and conveying distance are a function of eductor selection, as well as material properties and downstream piping considerations. Liqui-Jet Solids Eductors are available with Dry-Feed hoppers and Washdown style hoppers.

The Washdown style of feed hopper can dramatically increase the Suction Capacity and available Discharge Pressure of a given Eductor. This is achieved by ‘sealing’ the suction of the Eductor and reducing the amount of ambient air entrained with the solids. ‘TLS Series‘ Liqui-Jet Solids Eductors for Dry-Feed applications, and ‘TLST Series‘ Liqui-Jet Solids Eductors for use with Washdown Hoppers both combine the most efficient ratio of Motive liquid consumption with available Suction Capacity and Discharge Pressure. Liqui-Jet Solids eductors are typically available from stock in PVC, CPVC, Bronze/Brass, Cast Iron/Steel, 316L Stainless Steel, and all Carbon Steel construction. Abrasion resistant Ceramic Liners are also available. Other materials are available upon request. Threaded or flanged, or Sanitary connections are standard.

Speak to an Eductor Specialist Today. Large Inventory of Eductors. Fast & Friendly Service, Plus Get Same Day Shipments. We Service The United States and Canada. Learn more at https://elmridgejetapparatus.com/pumping-solids-eductors/

09/04/2026

Best wishes for a safe and happy Labor Day Weekend!

08/27/2026

Achieve High Vacuum at Low Costs with ELMRIDGE Liqui-Jet Eductors

ELMRIDGE Liqui-Jet Eductors, Exhausters, and Gas & Chemical Infusers use liquid under pressure as the Motive fluid for the purpose of pumping gases and/or v***rs. ‘TLL Series‘ Liqui-Jet Eductors are relatively inexpensive liquid powered devices that will pump smaller volumes of gas/v***r, and create significant (28 in-Hg) vacuum.

They are typically used where smaller volumes of gas are to be pumped and where liquid under pressure is abundant. ‘TLGT Series‘ Liquid-Jet Exhausters have a specially designed liquid nozzle that enables them to use smaller volumes of water than the ‘TLL Series‘, to draw larger volumes of gas/v***r to similar levels of vacuum.

‘TLG Series‘ Liqui-Jet Gas Scrubbers use smaller volumes of water to draw volumes of gas/v***r at low draft (low differential pressure) for the purpose of scrubbing condensable v***rs and aerosols from the Suction stream.

‘TLE Series‘ Liqui-Jet Gas infusers use larger volumes of liquid to infuse gas as small bubbles in a liquid stream with the smallest possible pressure drop.

Liqui-Jet Eductors, Exhausters, and Infusers are typically available from stock in PVC, CPVC, Bronze/Brass, Cast Iron/Steel, 316L Stainless Steel, and all Carbon Steel construction. Other materials are available upon request. Threaded, Flanged, or Sanitary connections are standard.

Contact Us Today Regarding Your Eductor Applications. We Have Offices in The United States and Canada: https://elmridgejetapparatus.com/pumping-gases-eductors/

ELMRIDGE Liqui-Jet Eductors, Exhausters, and Gas & Chemical Infusers are typically used where smaller volumes of gas are to be pumped and where liquid under pressure is abundant. ELMRIDGE Gas-Jet Ejectors and Exhausters can be used to evacuate tanks and prime pumps.

08/21/2026

Pumping Liquids and Slurries: The ELMRIDGE Solution

ELMRIDGE Liqui-Jet Eductors use water or other liquids under pressure as the Motive fluid, and operate on the venturi principle to pump other liquids or slurries.

The high-velocity jet of liquid from the eductor nozzle entrains the suction liquid, creating a vacuum, and causing the suction liquid to be pumped.

‘TLL Series‘ Liqui-Jet Eductors are optimized to achieve the best combination of Suction Capacity and available Suction Lift using the least amount of Motive Liquid. ‘TLLM Series’ Liqui-Jet Eductors and ‘TLLT Series‘ Liqui-Jet Eductors combine higher Motive Liquid flowrates and somewhat lower Suction capacities with higher Discharge heads. Other models are available from stock with different operating characteristics. Liqui-Jet eductors are typically available from stock in PVC, CPVC, PVDF, Polypropylene, Bronze/Brass, Cast Iron/Steel, 316L Stainless Steel, and all Carbon Steel Construction.

Other materials are available upon request. Threaded, Flanged, or Sanitary connections are standard.

Contact Us Today Regarding Your Eductor Applications. We Have Offices in The United States and Canada: https://elmridgejetapparatus.com/pumping-liquids-eductors/