What are the opening hours?

Monday 7:30am - 4:30pm Tuesday 7:30am - 4:30pm Wednesday 7:30am - 4:30pm Thursday 7:30am - 4:30pm Friday 9am - 2:30pm

D&H Industries

Directions Website

One of the largest North American manufacturers of metal stampings, deep drawn parts and weldments.

10/30/2026

Looking to get into manufacturing, or ready for a better shop environment?

D&H Industries is hiring Machine Operators for 1st and 2nd shift in Oconomowoc, WI.

You’ll work with automated equipment and robots to produce parts, perform basic quality checks, take measurements, and help keep production moving. Manufacturing experience is preferred for 1st shift, but D&H is also open to training people with the right attitude and willingness to learn.

1st Shift: Monday-Friday, 5:00 AM-3:00 PM
2nd Shift: Monday-Friday, 3:00 PM-1:00 AM
2nd Shift Premium: +$3.00/hour

D&H offers weekly pay, paid breaks and lunches, an on-site medical clinic, tuition reimbursement, 401(k), profit sharing, gainsharing and additional benefits.

Apply today: https://dhmetalstamping.com/careers/

10/29/2026

Now hiring welders and machine operators for 1st and 2nd shift in Oconomowoc.

Welders: Read prints, set up and run MIG, robotic, and resistance welders, and build assemblies to close tolerances.

Machine operators: Run equipment and robotic systems, inspect parts, and check measurements. D&H is willing to train people who are new to manufacturing.

1st shift: Monday–Friday, 5 am–3 pm
2nd shift: Monday–Friday, 3 pm–1 am, with a $3/hour shift premium

Weekly pay, an on-site health clinic, tuition reimbursement, and paid breaks are among the benefits.

See the openings and apply: https://dhmetalstamping.com/careers/

10/28/2026

Quality is built into the process, not just checked at the end.

D&H Industries is hiring Quality Technicians for 1st and 2nd shift in Oconomowoc, WI.

This role works directly with production to keep parts on target through first-piece, in-process and final inspection. You’ll read blueprints and control plans, use tools such as calipers, micrometers and height gauges, document findings, and support problem-solving when something is out of spec.

Experience with PPAP, FMEA, root-cause analysis and manufacturing quality systems is valuable.

2nd shift includes a $3.00/hour shift premium.

Weekly pay, an on-site medical clinic, tuition reimbursement, cross-training opportunities and gainsharing are part of the D&H package.

Apply: https://dhmetalstamping.com/careers/

10/27/2026

Coordinating stamped parts, weldments, and final assembly across multiple suppliers adds qualification overhead and schedule risk that lives inside your BOM whether you track it or not. When forming tolerances, weld joint geometry, and assembly fit all originate from separate sources, reconciling them mid-program is expensive. D&H Industries runs tool building, stamping, robotic and traditional welding, and value-added assembly including sub-modules and contract-manufactured units inside nearly 200,000 sq ft of ISO 9001:2015 managed space in Oconomowoc, Wisconsin -- details at dhmetalstamping.com. For lawn and garden programs in carbon steel, consolidating those steps also simplifies painting and plating coordination, which D&H manages through supply chain. How do you weigh qualification effort against the schedule exposure of splitting stamping and assembly across separate suppliers?

10/20/2026

Galvanized steel in the .125 to .500 in range puts real demands on a stamping program. Zinc coating behavior under high forming loads affects surface integrity in ways that show up late if forming sequences and die geometry are not dialed in from the start. D&H Industries runs mechanical and hydraulic presses to 2,000 tons at dhmetalstamping.com, and the press range matters less than how the tooling is engineered to work within it. Class A finishes on the formed part are achievable on carbon steel, and the same discipline applies to galvanized work where coating adhesion through the draw is part of the specification. When a galvanized component moves from prototype intent to a production die, at what point in your program does coating survivability through forming become a firm spec requirement rather than a review item?

10/15/2026

Supplier handoffs can turn an equipment program into a schedule, quality, and accountability problem.

D&H Industries will be at Equip Exposition in Louisville NEXT WEEK. If you’re planning a new outdoor power equipment program, transferring tooling, or looking for added stamping and welding capacity, schedule time with Nick Schneider at the show.

D&H supports tooling through production stamping, including deep-draw, progressive and transfer stamping, laser cutting, robotic welding, fabrication, and assembly.

📅 October 20–23, 2026
📍 Louisville, Kentucky

Bring an upcoming program, print, capacity need, or sourcing challenge. Contact us to book 30 minutes with Nick:

https://dhmetalstamping.com/contact-us/?utm_source=social&utm_medium=organic_social&utm_campaign=equip_expo_2026&utm_content=meet_nick

Address

510 S Worthington Street
Oconomowoc, WI
53066

Opening Hours

Monday	7:30am - 4:30pm
Tuesday	7:30am - 4:30pm
Wednesday	7:30am - 4:30pm
Thursday	7:30am - 4:30pm
Friday	9am - 2:30pm

Website

http://dhmetalstamping.com/

Alerts

Be the first to know and let us send you an email when D&H Industries posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.